SUBARU LEGACY 2001 3.G Service Manual

1-18For instruc tions on how to c onvert the retrac tor to
the ALR mod e and re-
store it to the ELR mod e, see the “Child restraint systems ” sec tion in this
c hap ter. Seatbelt warning light and chime
Your vehic le is eq uip p ed with a seatb elt warning d e vic e at the d river’s
seat.
This d evic e c auses the seatb elt warning lig ht on th e instrument p anel to
lig ht up for ab out six sec ond s when the ig nition sw itc h is turned to the
“ ON ” p osition to remind the d river to wear the seatb elt . If the d river’s
seatb elt is not fastened , a warning c hime sound s at the same time.
Fastening the seatbelt
WARNING
Never use a belt that is twisted or reversed. In an accident, this
can increase the risk or severity of injury. Never place the shoulder belt under the arm or behind the back.
If an accident occurs, this can increase the risk or severity of injury. Keep the lap belt as low as possible on your hips. In a colli-
sion, this spreads the force of the lap belt over stronger hipbones instead of across the weaker abdomen. Seatbelts provide maximum restraint when the occupant sits
well back and upright in the seat. To reduce the risk of sliding un-der the seatbelt in a collision, the front seatbacks should be al-ways used in the upright position while the vehicle is running. Ifthe front seatbacks are not used in the upright position in a colli-
sion, the risk of sliding under the lap belt and of the lap belt slid-ing up over the abdomen will increase, and both can result in se-rious internal injury or death. Do not put cushions or any other materials between occupants
and seatbacks or seat cushions. If you do so, the risk of slidingunder the lap belt and of the lap belt sliding up over the abdomenwill increase, and both can result in serious internal injury ordeath.

Seat, seatbelt and SRS airbags1-19
–
CONTINUED –
HS0231
Never place the shoulder belt under the arm or behind the back.
HS0230
Always wear the
seatbelts correctly.
Adjust the seatback to upright position. Sit well back and upright.
CAUTION
Metallic parts of the seatbelt can become very hot in a vehicle that has been closed up in sunny weather; they could burn an oc-cupant. Do not touch such hot parts until they cool.
Front seatbelts
OM-H0044OM-H0043
1. Ad just the seat p osition:
Driver’ s seat: Ad just the seatb ac k to the up rig ht p osition. Move the
seatb ac k as far from the steering wheel as p rac tic a l while still main-
taining full vehic le c ontrol.Front passenger ’s seat: Ad just the seatb ac k to the up rig ht p osition.
Move the seat as far b ac k as p ossib le.

1-202. Sit well b ac k in the seat.
3. Pic k up the tong ue p late and p ull the b elt out sl
owly. Do not let it
g et twisted . If the b elt stop s b efore reac hing the b uc kle, return the
b elt slig htly and p ull it out more slowly. If the b elt still c annot b e
unloc ked , let the b elt retrac t slig htly after g ivin g it a strong p ull, then
p ull it out slowly ag ain.
4. Insert the tong ue p late into the b uc kle until you hear a c lic k.
5. To make the lap p art tig ht, p ull up on the should er b elt. And p lac e
the lap b elt as low as p ossib le on your hip s, not o n your waist.
n Adjusting the front seat shoulder belt anchor height
WARNING
When wearing the seatbelts, make sure the shoulder portion of the webbing does not pass over your neck. If it does, adjust the
seatbelt anchor to a lower position. Placing the shoulder beltover the neck may result in neck injury during sudden braking orin a collision.
HB1029BB
The should er b elt anc hor heig ht should b e ad justed to the p osition
b est suited for you. To lower the anc hor heig ht, p u sh the release b ut-
ton and slid e the anc hor d own. To raise the anc hor heig ht, slid e the
anc hor up . Pull d own on the anc hor to make sure tha t it is loc ked in
p lac e.

Seat, seatbelt and SRS airbags1-21
–
CONTINUED –
Always ad just the anc hor heig ht so that the should e
r b elt p asses over
the mid d le of the should er without touc hing the nec k.
n Unfastening the seatbelt
HB0303
Push
Push the b utton on the b uc kle.
Before c losing the d oor, make sure that the b elts a re retrac ted p rop -
erly to avoid c atc hing the b elt web b ing in the d oor .
Rear seatbelts (except rear center seatbelt on wagon)
OM-H0044OM-H0043
1. Sit well b ac k in the seat.
2. Pic k up the tong ue p late and p ull the b elt out sl owly. Do not let it
g et twisted . If the b elt stop s b efore reac hing the b uc kle, return the
b elt slig htly and p ull it out more slowly. If the b elt still c annot b e
unloc ked , let the b elt retrac t slig htly after g ivin g a strong p ull on it,
then p ull it out slowly ag ain.

1-223. Insert the tong ue p late into the b uc kle until you
hear a c lic k.
4. To make the lap p art tig ht, p ull up on the should er b elt. And p lac e
the lap b elt as low as p ossib le on your hip s, not o n your waist.
n Unfastening the seatbelt
HB0303
Push
Push the b utton on the b uc kle.
Before c losing the d oor, make sure that the b elts a re retrac ted p rop -
erly to avoid c atc hing the b elt web b ing in the d oor .
Rear center seatbelt on wagon model
WARNING
Fastening the seatbelt with the webbing twisted can increase
the risk or severity of injury in an accident. When fastening the
belt after it is pulled out from the retractor, especially wheninserting the connector ’s tongue plate into the mating buckle (on
right-hand side), always check that the webbing is not twisted. Be sure to fasten both tongue plates to the respective
buckles. If the seatbelt is used only as a shoulder belt (with theconnector ’s tongue plate not fastened to the connector ’s buckle
on the right-hand side), it cannot properly restrain the wearer in
position in an accident, possibly resulting in serious injury ordeath.

Seat, seatbelt and SRS airbags1-23
–
CONTINUED –
HB1031BA
HB1030BA
HS1017BB
HB1032BA
1. Pull out the seatb elt slowly from the overhead re trac tor.
1. Center seatb elt tong ue
p late
2. Connec tor (tong ue)
3. Connec tor (b uc kle)
4. Center seatb elt b uc kle

1-24
HB1033BA
2. After c onfirming that the web b ing is not twisted , insert the c onnec -
tor (tong ue) attac hed at the web b ing end into the b uc kle on the rig ht-
hand sid e until a c lic k is heard . If the b elt stop s b efore reac hing the
b uc kle, return the b elt slig htly and p ull it out mo re slowly. If the b elt
still c annot b e unloc ked , let the b elt retrac t slig htly after g iving it a
strong p ull, then p ull it out slowly ag ain.
HB1034BA
3. Insert the c enter seatb elt tong ue p late in the c e nter seatb elt b uc kle
marked “CENTER ” on the left-hand sid e until it c lic ks. To make the lap
p art tig ht, p ull up on the should er b elt. And p lac e the lap b elt as low
as p ossib le on your hip s, not on your waist.

Seat, seatbelt and SRS airbags1-25
–
CONTINUED –
HS1019BA
nUnfastening the seatbelt
HS0317
Push
Push the release b utton of the c enter seatb elt b uc k le (on the left-hand
sid e) to unfasten the seatb elt. NOTE When the seatback is folded down for greater luggage space, it is
necessary to disconnect the connector.

1-26CAUTION
Do not allow the retractor to roll up the seatbelt too quickly.
Otherwise, the metal tongue plates may hit against the trim, resulting in damaged trim. Have the seatbelt fully rolled up so that the tongue plates are
neatly stored. A hanging tongue plate can swing and hit againstthe trim during driving, causing damage to the trim.
HB1037BA
HB1036BA
1. Insert a key or other hard p ointed ob jec t into th e slot in the c on-
nec tor (b uc kle) on the rig ht-hand sid e and p ush it in, and the c onnec -
tor (tong ue) p late will d isc onnec t from the b uc kle.
HB1048BA
HB1038CA
2. Allow the retrac tor to roll up the b elt. You shou ld hold the web b ing
end and g uid e it b ac k into the retrac tor while it i s rolling up . Neatly

Seat, seatbelt and SRS airbags1-27
–
CONTINUED –
store the tong ue p lates in the rec ess in the retrac
tor and then insert
the c onnec tor (tong ue) p late into the slot loc ated at the front of the
rec ess. NOTE When folding down the rear seat cushion, store the seatbelts in the seatbelt pocket to prevent them falling below the cushion.
HB1074BB
HB1076BB