display SUBARU LEGACY 2016 6.G Multimedia System Manual

Bluetooth® SETTINGS
180
DISPLAYING THE “Bluetooth Settings (Bluetooth
Settings)” SCREEN IN A DIFFERENT WAY
XFrom the phone/message settings screen
1. Select .
2. Select SETTINGS (SETTINGS).
3. Select Phone (Phone).
4. Select Connect Phone (Connect Phone).
XFrom the status display
1. 6HOHFWVWDWXVGLVSOD\DUHDRQWKHVFUHHQ
:3
REGISTERING A Bluetooth DEVICE
Up to 5 Bluetooth devices can be registered.
Bluetooth compatible phones (HFP) and audio devices
(AVP) can be registered simultaneously.
This operation cannot be performed while driving.
1. Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2. Select Add (Add).
XWhen another Bluetooth device is connected

”To disconnect the Bluetooth device, select
Yes
(Yes).
XWhen 5 Bluetooth devices have already been
registered

”A registered device needs to be replaced. Select
Yes (Yes), and then select the device to be
replaced.
3. When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth device.

”For details about operating the Bluetooth device, see
the manual that comes with it.

”To cancel the registration, select
Cancel (Cancel).

Bluetooth® SETTINGS
184
EDITING THE Bluetooth DEVICE
INFORMATION
The Bluetooth device’s information can be displayed on the
screen. The displayed information can be edited.
1. Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2. Select the desired device to be edited.
3. Select Device Info (Device Info).
4. <00260052005100bf00550050000300440051004700030046004b00440051004a004800030057004b004800030025004f005800480057005200520057004b0003004700480059004c004600480003004c0051004900520055005000440057004c0052005100
11>
No. Information
The name of the Bluetooth device. Can be changed to a
GHVLUHGQDPH
:3
Select to set the Bluetooth audio device connection
PHWKRG
:3
Device address is unique to the device and cannot be
changed.
Phone number of the Bluetooth phone.

SETTINGS
7
Bluetooth® SETTINGS
185
No. Information
&RPSDWLELOLW\SUR¿OHRIWKH%OXHWRRWKGHYLFH
Select to reset all setup items.
NOTE
OIf 2 Bluetooth devices have been registered with the same
device name, the devices can be distinguished referring to the
device’s address.
ODepending on the type of phone, some information may not be
displayed.
CHANGING A DEVICE NAME
1. Select Device Name (Device Name).
2. Enter the name and then select OK (OK).
NOTE
OEven if the device name is changed, the name registered in your
Bluetooth device does not change.
SETTING AUDIO DEVICE CONNECTION METHOD
1. Select Connect Audio Device from (Connect Audio
Device from).
2. Select the desired connection method.

”
Vehicle (Vehicle): Select to connect the audio
system to the audio device.

”
Device (Device): Select to connect the audio device
to the audio system.

”Depending on the audio device, the “Vehicle
(Vehicle)” or “Device (Device)” connection method
may be best. As such, refer to the manual that comes
with the audio device.

”To reset the connection method, select
Default
(Default).

Bluetooth® SETTINGS
186
“System Settings (System Settings)”
SCREEN
<0037004b004800030025004f005800480057005200520057004b00030056004800570057004c0051004a00560003004600440051000300450048000300460052005100bf0055005000480047000300440051004700030046004b00440051004a0048004700
11>
1. Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2. Select System Settings (System Settings).
3. Select the desired item to be set.
No. Information Page
Select to set Bluetooth connection on/off. 187
Displays system name. Can be changed to a
desired name.187
PIN-code used when the Bluetooth device
was registered. Can be changed to a desired
code.187
Device address is unique to the device and
cannot be changed.-
Select to set the phone connection status
display on/off.-
Select to set the connection status display of
the audio device on/off.-
&RPSDWLELOLW\SUR¿OHRIWKHV\VWHPGHYLFH-
Select to reset all setup items. -

OTHER SETTINGS
189
SETTINGS
7
No. Function
*16HOHFWWRFKDQJHWKHYHKLFOHFORFNVHWWLQJV
:3
Select to change the language.
Select to turn the beep sound on/off.
Select to change the button and screen color.
Select to change the keyboard layout.
Select to turn on/off the setting that returns the display
to the split screen automatically after 20 seconds when
a screen other than the split screen is displayed.
Select to turn the animation function on/off.
6HOHFWWRFXVWRPL]HWKHVFUHHQRIILPDJH
:3
6HOHFWWRGHOHWHSHUVRQDOGDWD
:3
No. Function
Select to set the connected device when using aha.
Select
USB (USB) when using an iPhone, and then
select
Bluetooth (Bluetooth) when using Android
devices.
Select to set the connected device when using
Pandora*2. Select USB (USB) when using an iPhone,
and then select
Bluetooth (Bluetooth) when using
Android devices.
Select to update the Gracenote® database. For details,
contact your SUBARU dealer.
Select to display the software information. Notices
related to third party software used in this product are
enlisted. (This includes instructions for obtaining such
software, where applicable.)
Select to set the back camera delay control on/off.
When set to on, the back camera image displays for
approximately 6 seconds after moving the shift lever/
select lever “R” to any position other than “R”.
The display disappears when the shift lever/select lever
is moved to “P”, or when the vehicle speed reaches
approximately 5 mph (8 km/h) or faster.
Select to set the welcome display on/off when getting
into the vehicle.
*1Select to set the low fuel - gas station search on/off.

OTHER SETTINGS
191
SETTINGS
7
CUSTOMIZING THE SCREEN OFF IMAGES
When the screen is turned off, the desired set image
can be displayed as the screen off image. Images
can be copied from a USB memory or SD card*.
A USB memory or SD card* must be connected when
HGLWLQJVFUHHQRIILPDJHV
:3
*: With navigation function
NOTE
OWhen saving the images to a USB or SD card* name the folder
that the screen off image is saved to “Image”. If this folder name
is not used, the system cannot download the images. (The folder
name is case sensitive.)
*: With navigation function O<002c00500044004a0048000300bf004f0048005600030056004400590048004700030057005200030057004b0048000300500044005300030036002700030046004400550047000300460044005100510052005700030045004800030053004f0044005c00
48004700110003>
QTRANSFERRING IMAGES
1. Select .
2. Select SETTINGS (SETTINGS).
3. Select General (General).
4. Select Customize Screen Off Image (Customize
Screen Off Image).
5. Select the device that the image is stored on.
6. Select Copy from [device] (Copy from [device]).
7. Select the desired images from the list and then select
Copy (Copy).

”The selected image is displayed on the right side
RI WKH VFUHHQ ,I WKH VHOHFWHG LPDJH

OTHER SETTINGS
192
QSETTINGS THE SCREEN OFF IMAGES
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Customize Screen Off Image (Customize
Screen Off Image).
3. Select the device that the image is stored on.
4. Select Select Images (Select Images).
5. Select the desired image.
6. Select OK (OK).
QDELETING TRANSFERRED IMAGES
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Customize Screen Off Image (Customize
Screen Off Image).
3. Select the device that the image is stored on.
4. Select Delete Images (Delete Images).
5. Select the images to be deleted and then select Delete
(Delete).
6. Select Yes <HV ZKHQ WKH FRQ

OTHER SETTINGS
196
MAINTENANCE
MAINTENANCE
When this system is turned on, the “Maintenance Reminder
(Maintenance Reminder)” screen displays when it is time to
UHSODFHDSDUWRUFHUWDLQFRPSRQHQWV
:3
1. Select , or select and then select INFO
(INFO).
2. Select Maintenance (Maintenance).
3. Select the desired item.
No. Function
Select to set the condition of parts or components.

:3
Select to add new information items separately from
provided ones.
Select to cancel all conditions which have been entered.
Select to reset the item which have expired conditions.
Select to call the registered dealer.
6HOHFWWRUHJLVWHUHGLWGHDOHULQIRUPDWLRQ
:3
Set Dealer (Set Dealer) appears if no dealer
information has been registered.

OTHER SETTINGS
198
DEALER SETTING
Dealer information can be registered in the system.
1. Select Set Dealer (Set Dealer).
2. Select the items to be edited.
No. Function Page
Select to enter the name of a dealer. 198
Select to enter the name of a dealer member. 198
Select to enter the phone number. 198
Select to delete the dealer information
displayed on the screen.-
QEDITING DEALER OR CONTACT NAME
1. Select next to “Dealer (Dealer)” or “Contact
(Contact)”.
2. Enter the name and then select OK (OK).
QEDITING PHONE NUMBER
1. Select next to “Phone # (Phone #)”.
2. Enter the phone number and then select OK (OK).

BASIC OPERATION
200
BASIC OPERATION
QUICK REFERENCE
MAP SCREEN
To display this screen, select , or select and
then select
MAP (MAP).
No. Name Information/Function Page
2D North-up, 2D
heading-up or
3D symbolSelect to change the map
display mode between 2D
north-up, 2D heading-up
or 3D. In 3D map, only
a heading-up view is
available.207
*
7UDI