SUBARU LEGACY 2017 6.G Multimedia System Manual

BASIC INFORMATION BEFORE OPERATION
39
BASIC FUNCTION
2
4.SelectNext (Next).

BASIC INFORMATION BEFORE OPERATION
40
8.SelectFinish (Finish).

BASIC INFORMATION BEFORE OPERATION
41
BASIC FUNCTION
2
LOADING AND UNLOADING A DISC
LOADING A DISC
CAUTION
ONever try to disassemble or oil any part of the CD player. Do
not insert anything other than a disc into the slot.
1.Insert a disc into the disc slot.

” After insertion, the disc is automatically loaded.
NOTE
O &RPSDWLEOH'LVF
:3
O When inserting a disc, gently insert the disc with the label facing
up.
UNLOADING A DISC
1.Press and remove the disc.
NOTE
O Discs can be unloaded even when the engine switch is turned
off.

BASIC INFORMATION BEFORE OPERATION
42
CONNECTING AND
DISCONNECTING A USB MEMORY/
PORTABLE DEVICE
CONNECTING A DEVICE
1.Connect a device.
USBAUX

”Turn on the power of the device if it is not turned on.
NOTE
O &RPSDWLEOH86%PHPRU\
:3
O &RPSDWLEOHL3RG
:3
O This unit does not support commercially available USB hubs.
O By connecting a device such as a cellular phone, charging starts
depending on the device.
LOADING AND REMOVING AN
SD CARD (WITH NAVIGATION
FUNCTION)
LOADING AN SD CARD
CAUTION
O 3RVLWLRQ WKH 6' FDUG ZLWK WKH

BASIC INFORMATION BEFORE OPERATION
43
BASIC FUNCTION
2
1.Turn the ignition switch to the “OFF” position.
2.Open the SD card slot cover.
3.Insert the SD card.

”Make sure that the SD card is fully inserted.
4.Close the SD card slot cover.
NOTE
O &RPSDWLEOH6'FDUG
:3
O You can enjoy music/video by inserting an SD card containing
DXGLR

BASIC INFORMATION BEFORE OPERATION
44
REMOVING AN SD CARD
CAUTION
OWhen removing an SD card from the unit, pull it out
horizontally. Do not pull it out upward or downward with force.
Doing so may damage the SD card.
O Do not remove an SD card during playback. Doing so may
corrupt the data. Please understand that no compensation will
be given for corrupted data.
O Do not pull the SD card slot cover with force. By doing so, the
SD card slot cover may come off, or be damaged. If the SD
card slot cover comes off, it can be reattached by inserting the
cover clip into the hole.
O Avoid touching the SD card terminals to prevent
contamination. Doing so may cause card read failure.
NOTE
O The system is reset and the initial screen appears if the map SD
card is removed during use, however, this is not a malfunction.
The map screen appears again approximately 7 seconds after
reinserting the map SD card.
O When removing an SD card from the unit and “Auto Adjust by
GPS (Auto Adjust by GPS)” is selected in the Clock Settings

:3 WKH WLPH RQ WKH &OLPDWH &RQWURO ZLOO FKDQJH WR
Greenwich Mean Time (GMT).
1.Turn the ignition switch to the “OFF” position.
2.Open the SD card slot cover.
3.Remove the SD card.

” Press in the SD card until you hear it “click”, let go of
the card, and then pull it straight out.
4.Close the SD card slot cover.

BASIC INFORMATION BEFORE OPERATION
45
BASIC FUNCTION
2
TOUCH SCREEN GESTURES
Operations are performed by touching the touch screen
GLUHFWO\ZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
46
Operation methodOutline Main use
Rotate*1
To change the
map direction,
rotate with two
¿QJHUVWRXFKLQJ
the screen.Changing the
horizontal
display angle of
the map.
*1: With navigation function
*2: The above operations may not be performed on all screens.
NOTE
O Flick operations may not be performed smoothly in high
altitudes.
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)

”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
O To prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
47
BASIC FUNCTION
2
INFO SCREEN OPERATION
REORDERING THE MENU ICONS
Order of the menu icons can be changed.
1.'LVSOD\WKH

BASIC INFORMATION BEFORE OPERATION
48
CUSTOMIZING THE SPLIT SCREEN
The display items/area on the split screen can be changed.
XFrom the split screen
1.Select.
XFrom the “SETTINGS (SETTINGS)” screen
1.SelectSplit Screen (Split Screen) on the “SETTINGS
6(77,1*6