display SUBARU TRIBECA 2011 1.G Navigation Manual

90
3
Set the memory point using the preferred method available on the
displayed screen.
NOTEUp to 100 memory points can be stored. Once that number has been reached, you must delete memory points that you no longer require
(see Page 94) before you can store new memory points. The number of memory points you can store is indicated on the screen.
Stored Locations
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 90

92
3
Select the memory point to be modified.You can change the sequence in which memory points are listed by selecting
(distance), (icon), (name), or (date).
4
Select the category key corresponding to the memory point to be
modified.
(icon):Selecting this key allows you to choose a display icon. and
of the CHANGE ICON screen contain standard icons, whereas
the “With Sound” (with sound) page contains icons that are
accompanied by response sounds. Select (with sound) to
listen to these sounds.
NOTE
The “With direction” ( / ) keys in the “With Sound” page are used to activate response
sounds only when you come near the memory point from the specified direction. Select or
and set the direction using or .
Stored Locations
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 92

93
Stored Locations
(category):Use this key to change the storage category. After selecting
this key, select the key of the new category.
(name):Select this key to change the name of a memory point. When
the change has been completed, select (OK). Then select
(on) if the name is to be displayed on the map, or
(off) if it is not to be displayed.
(position):Select this key to review the memory points and modify a
memory point on the map screen. After checking or modifying
it, select (OK).
(telephone):Select this key to modify a telephone number. When the
modification has been completed, select (OK).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 93

94
■Deleting memory pointsYou can delete stored memory points by using this function.1
Select the category of the memory point to be deleted.
2
Select (delete).
3
Select the memory point to be deleted.
4
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
Stored Locations
Press the button or select , then select (stored locations), and then select
(memory
points
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 94

95
Stored Locations
■Deleting all memory pointsUsing this function, you can delete all memory points.1
Select the category of the memory points to be deleted.
2
Select (delete all).
3
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
Press the button or select , then select (stored locations), and then select
(memory
points
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 95

102
Previous destination (deleting stored locations)Use this function to delete previously set destinations.
1
Select (delete).If (all delete) is selected, all previously set destinations will be deleted.
2
Select the destination to be deleted.
:Use this key to display up to five previous destinations.
:Use this key to display the previous destination.
:Use this key to display the next destination.
:Use this key to display up to five of the next destinations.
(name):Use this key to search through the list by name (alphabetical search).
(date):Use this key to search through the list by date.
Stored Locations
Press the button or select , then select (stored locations), and then select
(previous
destinations
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 102

103
Stored Locations
3
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 103

108
Displaying POIs on a mapUsing this function, you can display POIs on the current map screen.
1
Touch the current map screen.
2
Select (points of interest).
3
Select desired POIs (up to five) using the displayed category keys.For selecting POIs of categories other than the six categories on the screen, select
(list categories) and select any POIs from the newly displayed categories.
(all local POIs):Use this key to search for all local points of interest (see
below).
Once you have made your selection of POIs, corresponding markers will appear on
the current map screen.
To delete the markers for these POIs, see Page 112.
NOTE
Displayed information about each POI facility might not include recent changes. It is recommended that you check the location or
business days/hours before departure.
Other Functions
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 108

110
4
Select the POI you want to find from the list of categories.
:Use this key to display up to five previous POIs.
:Use this key to display the previous POI.
:Use this key to display the next POI.
:Use this key to display up to five of the next POIs.
:Use this key to search through the list by distance.
:Use this key to search through the list by icon type.
:Use this key to search through the list by name (alphabetical search).
Once you have made your selection of POIs, corresponding markers will appear on
the map.
Other Functions
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 110

111
Other Functions
Displaying POI dataYou can display the information on a POI, such as the name, address and telephone number.
1
Display the desired POI markers on the current map screen. (See Pages
74 and 108 for the procedure.)
2
Select the POI marker for which you want information by moving the
crosshair over it.The name of the POI will appear.
If no data is stored for the selected POI, no name is displayed.
3
Select (information).The information on the POI will be displayed.
:Use this key to store the POI location as a memory point.
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 111