tailgate SUZUKI NEXA 2015 1.G User Guide

Downloaded from www.Manualslib.com manuals search engine 
23(5$7,1*<2859(+,&/(
06(
NOTE:
In the presence of strong radio signals or
noise, you may not be able to change the
ignition mode to ACC or ON or to start the
engine using the engine switch. In this
case, the information display on the instru-
ment cluster will show the following mes-
sage: KEY FOB NOT DETECTED.8QUHOHDVHG6WHHULQJ/RFN:DUQLQJIf the steering lock remains engaged when
you press the engine switch to change the
ignition mode to “ON”, the information dis-
play in the instrument cluster shows the
message: “TRN. STEERING WHEEL TO
RELEASE LOCK”. Refer to “Information
Display” in the ³%()25( '5,9,1*´ sec-
tion for details.
NOTE:
The steering lock may not be released if
some load is acting on the steering wheel.
If this happens, turn the steering wheel to
the right or left to relieve it from the load
before you press the engine switch again
to change to the desired ignition mode.
.H\OHVV3XVK6WDUW6\VWHP
LIHTXLSSHGProvided the keyless push start system
remote controller is within the “interior
workable area” (refer to the related expla-
nation in this section), you can use the
engine switch for starting the engine and
selecting an ignition mode (ACC or ON). In
addition, the following functions can be
used:
• Keyless entry function. Refer to “Keyless
Push Start System Remote Controller” in
the “BEFORE DRIVING” section for
details.
• Locking and unlocking doors (including
the tailgate) using a request switch.
Refer to “Keyless Push Start System
Remote Controller” in the “BEFORE
DRIVING” section for details.
• Immobilizer (anti-theft) function. Refer to
“Immobilizer System” in the “BEFORE
DRIVING” section for details.(QJLQH6ZLWFK,OOXPLQDWLRQThe engine switch is illuminated (lit) in the
following situations:
• When the engine is off and the driver’s
door is open or for 15 seconds after the
drivers door is closed.
• When the engine is off and the position
lights are on. The illumination will go out
when the position lights are turned off.
• When the engine is on and the position
lights and/or the headlights are on. Theillumination will go out when the head-
lights are turned off.
82K253
NOTE:
To save the battery, the illumination will be
automatically turned off when both of the
following conditions are simultaneously
met:
• The headlights and position lights are
turned off.
• A period of 15 minutes has elapsed after
opening the driver’s door.6HOHFWLRQRI,JQLWLRQ0RGHVPress the engine switch to select the
“ACC” or “ON” mode as follows when you
use an electric accessory or check the
operation of instruments without running
the engine.
1) Bring the keyless push start system
remote controller with you and sit in the
driver’s seat.

Downloaded from www.Manualslib.com manuals search engine (1)
(1)
23(5$7,1*<2859(+,&/(
06(
NOTE:
If body wax does get on the camera lens,
wipe off the wax with a clean cloth damp-
ened with mild detergent diluted with
water, then wipe with a dry cloth.
+RZWR8VH5HDUYLHZ&DPHUD1) Turn the ignition switch to the “ON”
position or press the engine switch to
change the ignition mode to ON.
2) Shift the gearshift lever in the “R” posi-
tion.
• The display automatically shows the
view behind the vehicle.
• When the gearshift lever is shifted
from “R” to another gearshift lever
position, the display returns to the
previous display.
NOTE:
• Images shown on the display from the
rearview camera are reversed images
(mirror images).
• The colors of objects on the rearview
camera may differ from the actual object
colors.
• The rearview camera display has first
priority in any display mode. However,
the rearview camera display does not
show the rear view while the system is
initializing.'LVSOD\5DQJHRI5HDUYLHZ&DPHUDThe rearview camera display shows the
area behind the rear end of the tailgate.
The display cannot show objects which are
close to the bumper or under the bumper.
The rearview camera display cannot show
obstacles which are higher than the cam-
era. Upper parts of tall objects such as
road signs cannot be viewed on the dis-
play.([DPSOH RI GLVSOD\ UDQJH RI UHDUYLHZ
FDPHUD
61MM0A015
61MM0B012
(1) Display range
NOTE:
• Images shown on the display from the
rearview camera are reversed images
(mirror images).
NOTICE
,IZDWHUHQWHUVWKHUHDUYLHZFDPHUDLW
PD\ FDXVH D PDOIXQFWLRQ RU FDWFK
ILUH
'R QRW XVH KLJK SUHVVXUH ZDWHU
DURXQGWKHFDPHUD
NOTICE
7KH FDPHUD OHQV LV KDUG FRDWHG WR
SUHYHQW GDPDJH RU GLVFRORUDWLRQ
'DPDJH RU GLVFRORUDWLRQ RI OHQV PD\
REVFXUHWKHLPDJH

Downloaded from www.Manualslib.com manuals search engine 27+(5&21752/6$1'(48,30(17
06(
,QWHULRU/LJKW
64MS118
(1) Glove box light (if equipped)
(2) Footwell lights (if equipped)
(3) Instrument panel pocket light
(if equipped)
64MS078
(4) Front (without overhead console)
(5) Front (with overhead console)
(6) Center
(7) Luggage compartment (if equipped)
*ORYH%R[/LJKWLIHTXLSSHGRefer to “Glove Box” in this section.)RRWZHOO/LJKWVLIHTXLSSHGA footwell light is provided in the leg space
in front of each front seat. When any door
(including the tailgate) is open, the footwell
lights on both sides light automatically.
NOTE:
You can change the footwell lights opera-
tion via the information display. Refer to
“Information Display” in the “BEFORE
DRIVING” section.,QVWUXPHQW3DQHO3RFNHW/LJKW
LIHTXLSSHGThis light comes on while the position
lights, tail light and/or the headlights are
on.
(1)
(2) (3) (2)
(;$03/(
(4) / (5)(6)(7)
(;$03/(

Downloaded from www.Manualslib.com manuals search engine 27+(5&21752/6$1'(48,30(17
06(
/XJJDJH&RPSDUWPHQW
LIHTXLSSHG
61MM0B023
When you open the tailgate with the lug-
gage compartment light switch in the ON
position (1), the light comes on and
remains on as long as you keep the tail-
gate open.
When the luggage compartment light
switch is in the OFF position (2), the light
remains off regardless of whether the tail-
gate is open or close.
61MM0A108
NOTE:
The number of doors involved in the light-
ing operation of the interior light depends
on the vehicle specification. If there is a
switch (rubber projection) at the door
opening as shown, the door is involved in
the lighting operation. The tailgate is also
involved in this operation even without the
rubber projection.
$FFHVVRU\6RFNHW&HQWHUFRQVROH
64MS080
NOTICE
'R QRW OHDYH WKH WDLOJDWH RSHQ ZLWK
WKH OXJJDJH FRPSDUWPHQW OLJKW
VZLWFK LQ WKH 21 SRVLWLRQ IRU D ORQJ
WLPHRUWKHEDWWHU\ZLOOGLVFKDUJH
(1) (2)
(;$03/(
(;$03/(

Downloaded from www.Manualslib.com manuals search engine 
,163(&7,21$1'0$,17(1$1&(
06(
61MM0B085
NOTE:
When reinstalling the light housing, make
sure the clips are properly attached.
5HYHUVLQJ/LJKW
61MM0B088
1) Open the tailgate. Remove the clips (1)
by prying it off with a flat blade screw-
driver as shown in the illustration. Then,
pull out the trim (2).
61MM0B089
2) Disconnect the coupler (3) by pushing
the lock release. Turn the bulb holder ofthe reversing light (4) counterclockwise
and remove it.
61MM0B090
(5) Removal
(6) Install3) To remove and install the bulb of the
reversing light (4), simply pull out or
push in the bulb.
(2)
(1)
(3)
(4)
(4)
(5)
(6)
(;$03/(

Downloaded from www.Manualslib.com manuals search engine ,163(&7,21$1'0$,17(1$1&(
06(
/LFHQVH3ODWH/LJKW
61MM0B086
1) Turn the cover (1) counterclockwise to
remove it.
61MM0B087
2) To remove and install the bulb of the
license plate light (2), simply pull out or
push in the bulb.
+LJKPRXQW6WRS/LJKW
80J100
1) Open the tailgate, and remove the nuts
(1) as shown in the illustration.
(1)
(2)
(1)
(;$03/(

Downloaded from www.Manualslib.com manuals search engine 
,163(&7,21$1'0$,17(1$1&(
06(
63J127
2) Close the tailgate. Remove the high-
mount stop light housing (2) from the
tailgate.
68KS063
3) Remove the bulb holder as shown in
the illustration.
76MH0A128
(4) Removal
(5) Install
4) To remove and install the bulb of the
high-mount stop light (3), simply pull out
or push in the bulb.
(2)(;$03/(
(;$03/(
(3)
(4)
(5)
(;$03/(