stop start TOYOTA BZ4X 2022 Owners Manual (in English)

446
Owners Manual_Europe_M42D76_en
6-4. Using the other interior features
been parked in the sun
■About connected external devices
Depending on the connected external device, charging may occasionally be suspended and then start again. This is
not a malfunction.
A portable device can be charged
by just placing Qi standard wireless
charge compatible portable devices
according to the Wireless Power
Consortium, such as smartphones
and mobile batteries, etc., on the
charge area.
This function cannot be used with
portable devices that are larger
than the charging tray. Also,
depending on the portable device, it
may not operate as normal. Please
read the operation manual for por-
table devices to be used.
■The “Qi” symbol
The “Qi” symbol is a trademark of
the Wireless Power Consortium.
■Name for all parts
Charging tray
Charging area*
Operation indicator light
*: Portable devices and wireless char-
gers contain charging coils. The
charging coil in the wireless charger
can be moved within the charge area
near the center of the charging tray. If
NOTICE
■To prevent damage to the USB Type-C charging ports
●Do not insert foreign objects into the ports.
●Do not spill water or other liquids into the ports.
●Do not apply excessive force to or impact the USB Type-C charging ports.
●Do not disassemble or modify the USB Type-C charging ports.
■To prevent damage to external devices
●Do not leave external devices in the vehicle. The temperature inside the vehicle may become high, resulting
in damage to an external device.
●Do not push down on or apply
unnecessary force to an external device or the cable of an external device while it is connected.
■To prevent 12-volt battery dis-charge
Do not use the USB Type-C charging ports for a long period of time with the EV system stopped.
Wireless charger (if
equipped)

447
6
Owners Manual_Europe_M42D76_en
6-4. Using the other interior features
Interior features
the charging coil inside a portable
device is detected in the charge area,
the charging coil inside the wireless
charger will move toward it and start
charging. If the charging coil inside a
portable device moves outside of the
charge area, charging will automati-
cally stop.
If 2 or more portable devices are
placed on the charging tray, their
charging coils may not be properly
detected and they may not be
charged.
■Using the wireless charger
1 Open the lid.
2 Place the portable device on the
charging tray.
Place the charging side of the portable
device down with the center of the
device in the center of the charge area.
Depending on the portable device, the
charging coil may not be located in the
center of the device. In this case, place
the portable device so that its charging
coil is in the center of the charge area.
When charging, the operation indicator
light (orange) comes on.
If charging is not occurring, try placing
the portable device as close to the
center of the charging area as possible.
When charging is complete, the opera-
tion indicator light (green) comes on.
■Recharging function
 When charging is complete and
after a fixed time in the charge
suspension state, charging
restarts.
 When a portable device is
moved significantly in the charge
area, the charging coil is discon-
nected and charging is stopped
momentarily. However, if there is
a charging coil in the charge
area, the charging coil inside the
wireless charger will move
toward it and then charging
restarts.
■Rapid charging function
 The following portable devices
support rapid charging.
• Portable devices compliant with WPC
Ver1.2.4 and compatible with rapid
charging
• iPhone’s with an iOS version that
supports 7.5 W charging (iPhone 8
and later models)
 When a portable device that sup-
ports rapid charging is charged,
charging automatically switches
to the rapid charging function.

449
6
Owners Manual_Europe_M42D76_en
6-4. Using the other interior features
Interior features
■The wireless charger can be oper- ated when
The power switch is in ACC or ON.
■Portable devices that can be charged
●Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger. How-
ever, compatibility with all devices which meet the Qi wireless charging
Green (comes on)Blue
AM radio stations are being automat-
ically selected
 Wait until the system has com-
pleted the automatic selection of
AM radio stations. In the case that
automatic selection cannot be
completed, stop automatic selec-
tion.
The smart entry & start system is
detecting the key
 Please wait until the key detection
is complete.
Orange (Repeat-
edly flashes 3 times
continuously)
Gray
Foreign substance detection:
A metallic foreign substance is in the
charge area, and so the abnormal
heating prevention function of the
charging coil operated
 Remove the foreign substance
from the charge area.
Portable device misaligned:
 The charging coil in the portable
device moved outside of the
charge area, and so the abnormal
heating prevention function of the
charging coil operated
Orange (Repeat-
edly flashes 4 times
continuously)
Gray
Safety shutdown resulting when the
temperature within the wireless char-
ger exceeded the set value
 Stop charging, remove the porta-
ble device from the charging tray,
wait for the temperature to drop,
and then start charging again.
Operation indicator
light
Multimedia system
screenSuspected causes/Handling method

450
Owners Manual_Europe_M42D76_en
6-4. Using the other interior features
standard is not guaranteed.
●The wireless charger is designed to supply low power electricity (5 W or
less) to a cellular phone, smartphone, or other portable device.
●Failure to do so may result in the pos-sibility of fire, However, portable devices, such as the following, can be
charged with more than 5 W. • 7.5 W charging compatible iPhones can be charged at 7.5 W or less.
• Portable devices which conform to WPC Ver 1.2.4 (Extended Power pro-file) can be charged at 10 W or less.
■When covers and accessories are
attached to portable devices
Do not charge in situations where cover and accessories not able to handle Qi
are attached to the portable device. Depending on the type of cover (includ-ing for certain genuine manufacturer
parts) and accessory, it may not be pos- sible to charge.When charging is not performed even
with the portable device placed on the charge area, remove the cover and accessories.
■Charging precautions
●If the electronic key cannot be detected in the cabin, charging cannot
be performed. When a door is opened and closed, charging may be tempo-rarily suspended.
●While charging, the wireless charger and the portable device will become
warm. This is not a malfunction. If a portable device becomes warm while charging and charging stops
due to the protection function of the portable device, wait until the portable device cools down and charge it
again.
●Depending on usage of the portable
device, it may not be fully charged. This is not a malfunction.
■Important points of the wireless charger
●If the electronic key cannot be
detected within the vehicle interior,
charging can not be done. When the door is opened and closed, charging may be temporarily suspended.
●When charging, the wireless charging device and portable device will get
warmer, however this is not a mal- function. When a portable device gets warm while charging may stop due to
the protection function on the portable device side. In this case, when the temperature of the portable drops sig-
nificantly, charge again. The fan may start operating to lower the temperature inside the wireless
charger, however this is not a mal- function.
■Sound generated during operation
When the power supply switch is turned
on or while a portable device is being identified, operation sounds may be heard. This is not a malfunction.
■Cleaning the wireless charger
 P. 4 6 0
■Certification
 P. 6 6 2
WARNING
■Caution while driving
When charging a portable device, for safety reasons, the driver should not operate the main part of the portable
device while driving.
■Caution while in motion
Do not charge lightweight devices such as wireless headphones while in motion. These devices are very light
and may be ejected from the charging tray, which may lead to unforeseen accidents.

480
Owners Manual_Europe_M42D76_en
7-3. Do-it-yourself maintenance
■When rotating the tires
It is necessary to register the posi-
tion of each wheel after performing
a tire rotation.
Wheel position registration can be
performed by oneself. Wheel posi-
tion registration is performed by
driving forward with moderate left
and right turns. However, depend-
ing on the driving conditions and
driving environment, registration
may take some time to complete.
■Registration of the tire posi-
tion
1 Park the vehicle in a safe place
and stop the EV system for 15
minutes or more.
2 Start the EV system (P.243)
Registration cannot be performed while the vehicle is moving.
3 Press or of the meter
control switches and select .
4 Press or of the meter
control switches and select
“Vehicle Settings”, and then
press and hold the “OK”.
5 Press or of the meter
control switches and select
“TPWS Setting”, and then press
“OK”.
6 Press or of the meter
control switches and select
“Tyre Rotation”, and then press
“OK”.
NOTICE
■Repairing or replacing tires, wheels, tire pressure warning
valves, transmitters and tire valve caps
●When removing or fitting the
wheels, tires or the tire pressure warning valves and transmitters, contact any authorized Toyota
retailer or Toyota authorized repairer, or any reliable repairer as the tire pressure warning valves
and transmitters may be damaged if not handled correctly.
●Make sure to install the tire valve caps. If the tire valve caps are not installed, water could enter the tire
pressure warning valves and the tire pressure warning valves could be bound.
●When replacing tire valve caps, do not use tire valve caps other than
those specified. The cap may become stuck.
■To avoid damage to the tire pres-sure warning valves and trans-mitters
When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate
properly. If a liquid sealant is used, contact any authorized Toyota retailer or Toyota authorized repairer, or any
reliable repairer or other qualified ser- vice shop as soon as possible. After use of liquid sealant, make sure to
replace the tire pressure warning valve and transmitter when repairing or replacing the tire.
Registration of the position
of each wheel after perform-
ing a tire rotation

8
505
Owners Manual_Europe_M42D76_en
8
When trouble arises
When trouble arises
8-1. Essential information
Emergency flashers .......... 506
If your vehicle has to be
stopped in an emergency 506
If the vehicle is submerged or
water on the road is rising
....................................... 507
8-2. Steps to take in an emer-
gency
If your vehicle needs to be
towed .............................. 509
If you think something is wrong
....................................... 513
If a warning light turns on or a
warning buzzer sounds... 515
If a warning message is dis-
played ............................. 523
If you have a flat tire ......... 528
If the EV system will not start
....................................... 539
If you lose your keys ......... 541
If the charging port lids cannot
be opened ...................... 541
If the electronic key does not
operate properly ............. 542
If the 12-volt battery is dis-
charged .......................... 544
If your vehicle overheats... 549
If the vehicle becomes stuck
....................................... 551

523
8
Owners Manual_Europe_M42D76_en
8-2. Steps to take in an emergency
When trouble arises
■Warning messages
The warning messages explained below
may differ from the actual messages according to operation conditions and vehicle specifications.
■Warning buzzer
In some cases, the buzzer may not be heard due to being in a noisy location or audio sound.
■If “EV system stopped Steering
power low” is displayed
This message is displayed if the EV sys- tem is stopped while driving.
When steering wheel operations are
heavier than usual, grip the steering
wheel firmly and operate it using more force than usual.
■If “EV system overheated Output power reduced” is displayed
This message may be displayed when driving under severe operating condi-tions. (For example, when driving up a
long steep hill.) Handling method: P. 5 4 9
■If “Shift System Malfunction Shift- ing Unavailable Drive to a Safe
Place and Stop” or “Shift System Malfunction Driving Unavailable” is displayed
There is a malfunction in the shift control system. Have the vehicle inspected by any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer immediately.
■If “Shift is in N Release accelerator Before Shifting” is displayed
The accelerator pedal has been depressed when the shift position is in N.
Release the accelerator pedal and shift the shift position to D or R.
■If “Press brake when vehicle is stopped EV system may overheat”
is displayed
The message may be displayed when the accelerator pedal is depressed to
hold the vehicle while the vehicle is stopped on an incline, etc. The EV sys-tem may overheat. Release the acceler-
ator pedal and depress the brake pedal.
■If “Auto Power Off To Conserve Battery” is displayed
Power was turned off due to the auto-
matic power off function. Next time when starting the EV system, operate the EV system for approximately 5 min-
utes to recharge the 12-volt battery.
■If “Regenerative Braking Limited Press Brake to Decelerate” is dis-played
Regenerative braking may be restricted in the following situations. Firmly
If a warning message is
displayed
The multi-information display
shows warnings of system
malfunctions, incorrectly per-
formed operations, and mes-
sages that indicate a need for
maintenance. When a message
is shown, perform the correc-
tion procedure appropriate to
the message.
If a warning message is dis-
played again after the appro-
priate actions have been
performed, contact any autho-
rized Toyota retailer or Toyota
authorized repairer, or any reli-
able repairer.
Additionally, if a warning light
comes on or flashes at the
same time that a warning mes-
sage is displayed, take the
appropriate corrective action
for the warning light. ( P.515)

527
8
Owners Manual_Europe_M42D76_en
8-2. Steps to take in an emergency
When trouble arises
■If a message that indicates the
need for visiting any authorized Toyota retailer or Toyota authorized repairer, or any rel iable repairer is
displayed
The system or part shown on the multi- information display is malfunctioning.
Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable
repairer immediately.
■If a message that indicates the need for the rotary shifter operation is displayed
To prevent the rotary shifter from being operated incorrectly or the vehicle from moving unexpectedly, a message that
requires shifting the shift position may be displayed on the multi-information display. In that case, follow the instruc-
tion of the message and shift the shift position.
■If a message that indicates the need for referring to Owner’s Man-
ual is displayed
●If any of the following messages are
shown on the multi-information dis- play, follow the instructions.• “Battery Low” ( P.544)
• “Check Charging System Close Charging Port Lid” ( P.160) • “Charging system malfunction”
( P.160) • “Charging stopped High energy use” ( P.160)
●If any of the following messages are shown on the multi-information dis-
play, it may indicate a malfunction. Have the vehicle inspected by any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer immediately.• “Entry & Start System Malfunction”
• “Traction battery system malfunction” • “Accelerator system malfunction”• “Plug-in Charging System Malfunc-
tion” • “EV system malfunction”• “Shift System Malfunction Apply Park-
ing Brake Securely When Parking See
Owner’s Manual”
• “Shift System Malfunction See Owner’s Manual”• “Shift System Malfunction Stop in a
Safe Place See Owner’s Manual” • “P Switch Malfunction Apply Parking Brake Securely When Parking See
Owner’s Manual” • “Shift System Unavailable Apply Park-ing Brake Securely When Parking See
Owner’s Manual” • “Battery Low Shifting Unavailable See Owner’s Manual”
●If any of the following messages are shown on the multi-information dis-
play, it may indicate a malfunction. Immediately stop the vehicle and con-tact any authorized Toyota retailer or
Toyota authorized repairer, or any reli- able repairer.• “Braking Power Low”
NOTICE
■If “High Power Consumption Power to Climate Temporarily Limited” is displayed frequently
There is a possible malfunction relat- ing to the charging system or the 12-volt battery may be deteriorating.
Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable
repairer.
■If “Battery Low” is displayed fre-
quently
The 12-volt battery may have deterio- rated. As the battery may discharge in
this state when left unattended, have the battery inspected by any autho-rized Toyota retailer or Toyota autho-
rized repairer, or any reliable repairer.

528
Owners Manual_Europe_M42D76_en
8-2. Steps to take in an emergency
Stop the vehicle in a safe place
NOTICE
■If “Maintenance Reqd. For Trac- tion Battery At Your Dealer” is
shown
The traction battery is scheduled to be inspected or replaced. Have the
vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer
immediately.
●Continuing to drive the vehicle with- out having the traction battery
inspected will cause the EV system not to start.
●If the EV system does not start, contact any authorized Toyota retailer or Toyota authorized
repairer, or any reliable repairer immediately.
If you have a flat tire
Your vehicle is not equipped
with a spare tire, but instead is
equipped with an emergency
tire puncture repair kit.
A puncture caused by a nail or
screw passing through the tire
tread can be repaired tempo-
rarily using the emergency tire
puncture repair kit.
(The kit contains a bottle of
sealant. The sealant can be
used only once to temporarily
repair one tire without remov-
ing the nail or screw from the
tire.) Depending on the dam-
age condition of the flat tire, it
may not be able to repaired
with the emergency tire punc-
ture repair kit.
After temporarily repairing the
tire with the kit, have the tire
repaired or replaced by any
authorized Toyota retailer or
Toyota authorized repairer, or
any reliable repairer.
WARNING
■If you have a flat tire
Do not continue driving with a flat tire.
Driving even a short distance with a flat tire can damage the tire and the
wheel beyond repair, which could result in an accident.
Before repairing the vehicle

544
Owners Manual_Europe_M42D76_en
8-2. Steps to take in an emergency
■Stopping the EV system
Set the parking brake, shift the shift
position to P and press the power switch as you normally do when stopping the EV system.
■Electronic key battery
As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced
immediately when the battery is depleted. ( P.499)
■Alarm (if equipped)
Using the mechanical key to lock the
doors will not set the alarm system. If a door is unlocked using the mechani-cal key when the alarm system is set,
the alarm may be triggered. ( P. 7 7 )
■Changing power switch modes
Release the brake pedal and press the power switch in step 3 above.
The EV system does not start and modes will be changed each time the switch is pressed. ( P.246)
If you have a set of jumper (or
booster) cables and a second vehi-
cle with a 12-volt battery, you can
jump start your vehicle by following
the steps below.
1 Confirm that the electronic key
is being carried.
When connecting the jumper (or
booster) cables, depending on the situ- ation, the alarm may activate and the doors may lock. ( P.78)
2Open the hood (P.467).
3 Open the positive (+) battery ter-
minal cover.
While pressing on the claw, open the
If the 12-volt batter y is
discharged
The following procedures may
be used to start the EV system
if the vehicle’s 12-volt battery
is discharged.
You can also call any autho-
rized Toyota retailer or Toyota
authorized repairer, or any reli-
able repairer.
Restarting the EV system