TOYOTA C-HR 2023 Owners Manual
Page 441 of 814
4394-5. Using the driving support systems
4
Driving
C-HR_HEV_OM_Europe_OM10764E
Page 442 of 814
4404-5. Using the driving support systems
C-HR_HEV_OM_Europe_OM10764E
Page 443 of 814
4414-5. Using the driving support systems
4
Driving
C-HR_HEV_OM_Europe_OM10764E
Page 444 of 814
4424-5. Using the driving support systems
C-HR_HEV_OM_Europe_OM10764E
Page 445 of 814
4434-5. Using the driving support systems
4
Driving
C-HR_HEV_OM_Europe_OM10764E
Page 446 of 814
4444-5. Using the driving support systems
C-HR_HEV_OM_Europe_OM10764E
Page 447 of 814
4454-5. Using the driving support systems
4
Driving
C-HR_HEV_OM_Europe_OM10764E
Page 448 of 814
4464-5. Using the driving support systems
C-HR_HEV_OM_Europe_OM10764E
For vehicles sold in Ukraine
Page 449 of 814
4474-5. Using the driving support systems
4
Driving
C-HR_HEV_OM_Europe_OM10764E
For vehicles sold in Serbia
Page 450 of 814
4484-5. Using the driving support systems
C-HR_HEV_OM_Europe_OM10764E
WARNING
■To ensure the system can operate properly
One Blind Spot Monitor sensor is installed inside the left and right side of
the vehicle rear bumper respectively. Observe the following to ensure the
Blind Spot Monitor can function correctly.
If the warning message does not disappear, have the vehicle ins pected
by any authorized Toyota retailer or Toyota authorized repairer , or any reli-
able repairer.
● Do not subject a sensor or its surrounding area on the rear bumper to a
strong impact.
If a sensor is moved even slightly off position, the system may malfunction
and vehicles may not be detected correctly.
In the following situations, have your vehicle inspected by any authorized
Toyota retailer or Toyota authorized repairer, or any reliable repairer.
• A sensor or its surrounding area is subject to a strong impact .
• If the surrounding area of a sensor is scratched or dented, or part of
them has become disconnected.
● Do not disassemble the sensor.
● Do not attach accessories or stickers to the sensor or surrounding area on
the bumper.
● Do not modify the sensor or surrounding area on the bumper.
● Do not paint the rear bumper any color other than an official Toyota color.
●Keep the sensor and its surrounding
area on the bumper clean at all times. If
a sensor or its surrounding area on the
rear bumper is dirty or covered with
snow, the Blind Spot Monitor may not
operate and a warning message
( P. 436) will be displayed.
In this situation, clear off the dirt or
snow and drive the vehicle with the
operation conditions of the BSM func-
tion ( P. 451) satisfied for approxi-
mately 10 minutes.