fuse TOYOTA CAMRY 1994 XV10 / 4.G Wiring Diagrams User Guide

60
POWER SOURCE (Current Flow Chart)
*Page Nos. of
Related Systems
Parts
Code or
Location
CB or Fuse
Location
156
* These are the page numbers of the first page on which the related system is shown.
The part indicated is located somewhere in the system, not necessarily on the page indicated here.


P13 P14 P15 P16 R1 R2 R3 R5 R6 R7 R8 R9156 156126
222
224
228
234126
190154120
124
Power Window Motor Front LH
Power Window Motor Front RH
Power Window Motor Rear LH
(EX. C/P)
Radiator Fan Motor (5S±FE)
Radio and Player (w/ CD Player)
Radio and Player (w/o CD Player)
Rear Window Defogger SW
Remote Control mirror SW
Rheostat
Stop Light LH
[Rear Comb. Light LH]
Taillight LH
[Rear Comb. Light LH]
Rear Turn Signal Light LH
[Rear Comb. Light LH]
Stop Light LH
[Rear Comb. Light LH]
40A AM1
15A CIG/RADIO
40A DEFOG
15A ECU±1G
10A GAUGE
7.5A IGN
10A MIR±HTR
30A POWER
7.5A SRS
15A STOP
15A TAIL
7.5A TURN
20A WIPER
30A AM2
7.5A ALT±S
30A CDS FAN
20A DOME
15A ECU±B
15A EFI
10A HAZ
15A HEAD (LWR±LH)
15A HEAD (LWR±RH)
15A HEAD (UPR±LH)
15A HEAD (UPR±RH)
15A HEAD LH
15A HEAD RH
10A HORN
40A MAIN
7.5A OBD
10A STARTER
10A A/C
40A HEATER
7.5A DRL
100A ALT
60A ABSR10 R11 R16 R17
Power Window Motor Rear RH
(EX. C/P)
Taillight LH
[Rear Comb. Light LH]
Back±up Light LH
[Rear Comb. Light LH]
Stop Light RH
[Rear Comb. Light RH]
Taillight RH
[Rear Comb. Light RH]
Rear Turn Signal Light RH
[Rear Comb. Light RH]
Taillight RH
[Rear Comb. Light RH]
Stop Light RH
[Rear Comb. Light RH]
Back±up Light RH
[Rear Comb. Light RH]
Rear Window Defogger (+)
(EX. W/G)
Rear Window Defogger (±)
(EX. W/G)
Rear Window Defogger (±)
(W/G)
156 242 126 126144
14811 4
148120
124144
148152120
124144
14811 4
11 8144
148120
124152 190 190 190
[LOCATION](1)
(7): J/B No. 1 (See page 20)
: R/B No. 7 (See page )(2)
(8): J/B No. 2 (See page 19)
: Fuse Box (F10, F17 See
on page )(3): R/B No. 1 (See page 23)
2022
25
27
28 29

62
POWER SOURCE (Current Flow Chart)
*Page Nos. of
Related Systems
Parts
Code or
Location
CB or Fuse
Location
* These are the page numbers of the first page on which the related system is shown.
The part indicated is located somewhere in the system, not necessarily on the page indicated here.


106
Horn Relay
Headlight Relay (Point Side)
Radiator Fan Relay (Point Side)
Turn Signal Flasher
Heater Relay (Point Side)
Radiator Fan Relay No. 2
(Coil Side)
A/C Magnetic Clutch Relay
(Coil Side)
Daytime Running Light Relay No. 3
(Coil Side)
40A AM1
15A CIG/RADIO
40A DEFOG
15A ECU±1G
10A GAUGE
7.5A IGN
10A MIR±HTR
30A POWER
7.5A SRS
15A STOP
15A TAIL
7.5A TURN
20A WIPER
30A AM2
7.5A ALT±S
30A CDS FAN
20A DOME
15A ECU±B
15A EFI
10A HAZ
15A HEAD (LWR±LH)
15A HEAD (LWR±RH)
15A HEAD (UPR±LH)
15A HEAD (UPR±RH)
15A HEAD LH
15A HEAD RH
10A HORN
40A MAIN
7.5A OBD
10A STARTER
10A A/C
40A HEATER
7.5A DRL
100A ALT
60A ABS
Radiator Fan Relay (Coil Side)
Heater Relay (Coil Side)
Radiator Fan Relay No. 2
(Point Side)
Radiator Fan Relay No. 3
(Point Side)
A/C Magnetic Clutch Relay
(Point Side)
Circuit Opening Relay (Coil Side)
Circuit Opening Relay (Coil Side)
Daytime Running Light Relay No. 4
(Coil Side)
106 173 106 242 24211 4
11 8246 246 242 242 242 246 24680
90
9880
90
98
[LOCATION](1)
(4): J/B No. 1 (See page 20)
: R/B No. 4 (See page )(2)
(5): J/B No. 2 (See page 19)
: R/B No. 5 (See page )(3)
(6): R/B No. 1 (See page 23)
: R/B No. 6 (See page )
(7): R/B No. 7 (See page 20)(8): Fuse Box (F10, F17 See
on page 19) 20 2225
25
28 2926 26
27

64

POWER SOURCE
5 512
3 W
W
W
W
W±R
B±R
W±B
W±R
W W
R±LW B±R L
W B60A ABS
100A ALT
DAYTIME RUNNING
LIGHT RELAY NO. 2(
CA NADA)
(
USA)
B
2H2
EC1 6
B
(
CANADA)
5
RW±B
FL MAIN
2. 0L
B
BATTERY
1
B
GENERATOR
(
ALTERNATOR) G1W
W
E14 : 1MZ±FE
E23 : 5S±FE
(
5S±FE)
(
1MZ±FE)
B 1A 1
D 1
C 1 E 1
TO AB S
ACTUATOR W±L
(
1MZ±FE)
(
5S±FE)
B F1 0 , F10
AC,F16
E F17D ,F18
FUSE B OX
W
(
5S±FE)(
5S±FE)
4 40A
HEATER
4 4
3 W
EF1 3IP37EF14
I2
E6
E14 : 1MZ±FE
E20 : 5S±FE
E14 : 1MZ±FE
E15 : 5S±FE
WW
W
W
WW
W
2 40A
AM1
1G 91E 1
1
3A 15
3C 16
2E2
2H215A HEAD(
RH)
15A HEAD(
LH)
15A HEAD(
UPR±RH)
15A HEAD(
UPR±LH)
2F 15
2 TER RELAY
2C2C
25
1
2E1 2G1 10A HAZ
20A DOME
AM2
15A EFI
40A MAIN
HEADLIGHT
RELAY
4
23
1 10A HORN 7. 5A ALT±S15A TEL
30A CDS FAN30A RDI FAN
543
W
2B6
2B2W±B
W±B 2G6
B±R
2H 1
15A ECU±B
ENGINE
MAIN RELAY 21
7. 5A OBD
30A
STAR3
B

68
STARTING AND IGNITION (1MZ±FE)
A
AM1
AM2 104
7
9 ACC
IG1
ST1
IG2
ST2
EF1 3EF1 1 1 2G 1
1
2H 2
IG M
B 1
B1
B±RB±R
B±R B±O B±WB±O
B
BWW
W±RW
B±R B±R
W±B
B
B±W B
W±B W±B
B±W
IGNITION SW
52 31
B±W 100A ALT
FUSE BOX
30A
AM210A
STARTER
STARTER
RELAY
PARK/NEUTRAL POSITION SW
(
NE UTRA L START SW)
STARTER BATTERY FL MAIN
2. 0L
S3 , S4 I12
P1
AP
N5
6
B
A 1
B 1
B F10 , F16A
E10 17 2C52F12C2
TO CIRCUIT OPENING
RELAY TO ENGINE CO NTROL
MODULE(
ENGINE AND
ELECTRONIC CONTROLLED
TRANSMISSION ECU)B±W
B±W
5
4 40A
MAIN
IP1
B±W
1E 51G 6
1C 113C 6
1M 13C 18
3C 2
3D 2 3B 20
1G 9
1E 140A
AM1 2
1

72
STARTING AND IGNITION (5S±FE)
4
107
9 AM2 AM1ACC
IG1
ST1
IG2
ST2
30A
AM210A
STARTER 40A
MAIN
A 1
B 12C 52F12C2 1
1 2H 22G 1
B1A 1
IG EF1 1EF1 1
M 52 31
2 1
E20 EF1 3B±O
B±W
B±O
B±R
BB±W
W±RW
B±WB W
B±W B±W
B W±BB±R
B
B
B±W B±W
B± R(
M/T)
(
M/T)
(
A/T)
(
A/T)
(
M/T)
(
A/T) W±B
4 5
P
N
65
W
B B
W±BB±R
W±B
B±R
PARK/NEUTRAL POSITION SW
(
NE UTRA L START SW)
(
A/T) P1CLUTCH START
SW(
M/T) C7
STARTER
RELAY IGNITION SW I12
FL MAIN
2. 0L
BATTERY
TO CIRCUIT OPENING
RELAY TO ENGINE CONTROL
MODULE(
ENGINE AND
ELE CTRONIC CO NTROLLED
TRANSMISSION
ECU(
A/T)
,
ENGINE ECU(
M/T))
B S3 ,S4A
B F10 , F16A
STARTER
FUSE BOX100A ALT
IP 1 17
1G 6
1E 5
140A
AM1
1E 11G 9
2
3B 20 3D23C 2
3C 18
1M 13C 6
1C 11

76
CHARGING
A
IG L S B
IC RE GULATOR2C 6
B 2B1B3 8
E9
E
IP3 10 IP 3 2GE 64)
A 1 7. 5A
ALT±S
R±LY
W
R±L
YB±O
W B
W
W
GENERATOR
(
ALTERNATOR)
BATTERY FL MAIN
2. 0L
100A ALT
CHARGE WARNING LIGHT
[COMB. METER]
JUNCTION
CONNECTOR
Y
J1
G1 , G2
C9
B FUSE BOX
FROM DAYTIME RUNNING
LIGHT RELAY(
MAIN)
Y E
(
CANADA)
R±L R±L
TO BA CK± UP SW(
M/T)
TO PARK/NEUTRAL POSITION
SW(
NEUTRAL START SW)(
A/T)
TO VEHICLE SPEED SENSOR
(
SPEED SENSOR) B 1A 1
C 1(
1MZ±FE)
(
5S±FE)
B F10 , F10AC,F16
I18
1D 61D37. 5A
IGN 10A
GAUGE
FROM POWER SOURCE SYSTEM(
SEE PA

80
ENGINE CONTROL (1MZ±FE)
AM1
AM2 104
7
9 ST1
IG2
2G 1
IG 1 2
1 2
1 2
1 2
1 2
1 2 I20
E12 I18 E12 I18
BX1 4IJ1 16 EF1 3IP1 9IP1 16
IP3 15 66
666 641 32 2H 2
L±B
G±R
Y
R
L
GR
G
W B±OL±B B±W
B±WB±O
B±O B±O B±O
BB±O
BWW
BW
W±R
B±O
B±O B±O B±O
B±O
B±O
B±O
B±O
B±O Y RL GRG W
W±B W±B W±B
L±B L±BG±R
L±BB± O
B±W
B±W
BATTERY FL MAIN
2. 0LI18
B±O B±O 100A ALT
10A
STARTER
30A
AM2
FUSE BOX
IGNITION SW
CIRCUIT
OPENING
RELAY
INJECTOR NO. 1
INJECTOR NO. 6
INJECTOR NO. 3
INJECTOR NO. 4
INJECTOR NO. 5
INJECTOR NO. 2 I4
I9
I6
I7
I8
I5
I12
L±B
A 1
B 1B F10 , F16A
FROM POWER SOURCE
SYSTEM(
SEE PAGE 64)
1 B±O
B±W B±W
B±O
IP14
B±O 4
1G 9
1E 140A
AM1 2
1
1G 8
1A 67. 5A
IGN 1D 9
3B 20
3D 23C 2
3A 13
1C 113C 18
1M 1

88
ENGINE CONTROL (5S±FE)
THIS SYSTEM UTILIZES AN ENGINE CONTROL MODULE (ENGINE ECU (M/T), ENGINE AND ELECTRONIC CONTROLLED
TRANSMISSION ECU (A/T)) AND MAINTAINS OVERALL CONTROL OF THE ENGINE, TRANSMISSION AND SO ON. AN OUTLINE OF THE
ENGINE CONTROL IS EXPLAINED HERE.
1. INPUT SIGNALS
(1) ENGINE COOLANT TEMP. (WATER TEMP.) SIGNAL SYSTEM
THE ENGINE COOLANT TEMP. SENSOR (EFI WATER TEMP. SENSOR) DETECTS THE ENGINE COOLANT TEMP. AND HAS A
BUILT±IN THERMISTOR WITH A RESISTANCE WHICH VARIES ACCORDING TO THE ENGINE COOLANT TEMP. (WATER TEMP.)
THUS THE ENGINE COOLANT TEMP. (WATER TEMP.) IS INPUT IN THE FORM OF A CONTROL SIGNAL TO TERMINAL THW OF
THE ENGINE CONTROL MODULE (ECU).
(2) INTAKE AIR TEMP. SIGNAL SYSTEM
THE INTAKE AIR TEMP. SENSOR (IN±AIR TEMP. SENSOR) IS DETECTS THE INTAKE AIR TEMP., WHICH IS INPUT AS A
CONTROL SIGNAL TO TERMINAL THA OF THE ENGINE CONTROL MODULE (ECU).
(3) OXYGEN SENSOR SIGNAL SYSTEM
THE OXYGEN DENSITY IN THE EXHAUST GASES IS DETECTED AND INPUT AS A CONTROL SIGNAL TO TERMINAL OX1 AND
OX2 OF THE ENGINE CONTROL MODULE (ECU).
(4) RPM SIGNAL SYSTEM
CRANKSHAFT POSITION AND ENGINE RPM ARE DETECTED BY THE PICK±UP COIL INSTALLED INSIDE THE DISTRIBUTOR.
CRANKSHAFT POSITION IS INPUT AS A CONTROL SIGNAL TO TERMINALS G+ AND G2 (CALIFORNIA), OF THE ENGINE
CONTROL MODULE (ECU), AND RPM IS INPUT TO TERMINAL NE+.
(5) THROTTLE SIGNAL SYSTEM
THE THROTTLE POSITION SENSOR DETECTS THE THROTTLE VALVE OPENING ANGLE, WHICH IS INPUT AS A CONTROL
SIGNAL TO TERMINAL VTA OF THE ENGINE CONTROL MODULE (ECU), OR WHEN THE VALVE IS FULLY CLOSED, TO
TERMINAL IDL
(6) VEHICLE SPEED SIGNAL SYSTEM
THE VEHICLE SPEED SENSOR (SPEED SENSOR), INSTALLED INSIDE THE COMBINATION METER, DETECTS THE VEHICLE
SPEED AND INPUTS A CONTROL SIGNAL TO TERMINAL SPD OF THE ENGINE CONTROL MODULE (ECU).
(7) PARK/NEUTRAL POSITION SW (NEUTRAL START SW) SIGNAL SYSTEM (A/T)
THE PARK/NEUTRAL POSITION SW (NEUTRAL START SW) DETECTS WHETHER THE SHIFT POSITION ARE IN NEUTRAL AND
PARKING OR NOT, AND INPUTS A CONTROL SIGNAL TO TERMINAL NSW OF THE ENGINE CONTROL MODULE (ECU).
(8) A/C SW SIGNAL SYSTEM
THE A/C AMPLIFIER INPUTS THE A/C OPERATIONS TO TARMINAL ACA OF THE ENGINE CONTROL MODULE (ECU) AS A
CONTROL SIGNAL.
(9) BATTERY SIGNAL CIRCUIT
VOLTAGE IS CONSTANTLY APPLIED TO TERMINAL BATT OF THE ENGINE CONTROL MODULE (ECU). WHEN THE IGNITION SW
TURNED ON, THE VOLTAGE FOR ENGINE CONTROL MODULE (ECU) START±UP POWER SUPPLY IS APPLIED TO TERMINALS
+B AND +B1 OF ENGINE CONTROL MODULE (ECU) VIA EFI MAIN RELAY. THE CURRENT FLOWING THROUGH THE IGN FUSE
FLOWS TO TERMINAL IGSW OF THE ENGINE CONTROL MODULE (ECU).
(10) INTAKE AIR VOLUME SIGNAL SYSTEM
INTAKE AIR VOLUME IS DETECTED BY THE MANIFOLD ABSOLUTE PRESSURE SENSOR (VACUUM SENSOR) (FOR MANIFOLD
PRESSURE) AND IS INPUT AS A CONTROL SIGNAL TO TERMINAL PIM OF THE ENGINE CONTROL MODULE (ECU).
(11) STA SIGNAL CIRCUIT
TO CONFIRM WHETHER THE ENGINE IS CRANKING, THE VOLTAGE APPLIED TO THE STARTER MOTOR DURING CRANKING IS
DETECTED AND THE SIGNAL IS INPUT INTO TERMINAL STA OF THE ENGINE CONTROL MODULE (ECU) AS A CONTROL
SIGNAL.
(12) ENGINE KNOCK SIGNAL CIRCUIT
ENGINE KNOCKING IS DETECTED BY KNOCK SENSOR AND THE SIGNAL IS INPUT INTO TERMINAL KNK AS A CONTROL
SIGNAL.
(13) ELECTRICAL LOAD SIGNAL SYSTEM
THE SIGNAL WHEN SYSTEMS SUCH AS THE REAR WINDOW DEFOGGER, HEADLIGHTS, ETC. WHICH CAUSE A HIGH
ELECTRICAL BURDEN ARE ON IS INPUT TO TERMINAL ELS AS A CONTROL SIGNAL.
SYSTEM OUTLINE

106
HEADLIGHT (FOR CANADA)
13
11 9 OFF
TA I L
HE AD
LOW
HIGH
FL AS H
LIGHT
CONTROL
SW DIMME R SW
COMBINATION SW
I5I7 I7
EF1 4
IE12 214 5 15
16 4
13
2W
B
W
R±B
G±R
R±B B
R±B
L±Y L±Y R±BG R±Y W±B
W±B W±B
R±YB B
BW W
INTEGRATION RELAY
DAYTIME RUNNING LIGHT RELAY
(
MAIN) FL MA IN
2. 0L
BATTERY
100A ALT
I13
D4 C12
FUSE BOX
I5
W±B
B 1A 1
C 2G±R
W±B W±B (
1MZ±FE)
(
5S±FE)B F10 , F10AC,F16
3A 93B 11
2G 72E1
2G 3
R±B
W
15A
ECU±B HEADLIGHT
RELAY 2H2
31 42
40A
MAIN

109
CURRENT FROM THE BATTERY IS ALWAYS FLOWING FROM THE FL MAIN " HEADLIGHT RELAY (COIL SIDE) " TERMINAL 5 OF THE
DAYTIME RUNNING LIGHT RELAY (MAIN) AND TERMINAL 14 OF THE DIMMER SW, HEADLIGHT RELAY (COIL SIDE) " TERMINAL 3 OF
THE INTEGRATION RELAY " TERMINAL 4 " TERMINAL 13 OF THE LIGHT CONTROL SW, FL MAIN " DAYTIME RUNNING LIGHT
RELAY NO. 2 (COIL SIDE) " TERMINAL 17 OF THE DAYTIME RUNNING LIGHT RELAY.
1. DAYTIME RUNNING LIGHT OPERATION
WHEN THE ENGINE IS STARTED, VOLTAGE GENERATED AT TERMINAL L OF THE GENERATOR (ALTERNATOR) IS APPLIED TO
TERMINAL 11 OF THE DAYTIME RUNNING LIGHT RELAY (MAIN).
IF THE PARKING BRAKE LEVER IS PULLED UP (PARKING BRAKE SW ON) AT THIS TIME, THE RELAY IS NOT ENERGIZED, SO THE
DAYTIME RUNNING LIGHT SYSTEM DOES NOT OPERATE. IF THE PARKING BRAKE LEVER IS RELEASED (PARKING BRAKE LEVER
SW OFF), THE SIGNAL IS INPUT TO TERMINAL 8 OF THE RELAY. THIS ACTIVATES THE RELAY ALSO, CURRENT FROM FL MAIN
FLOWES TO DAYTIME RUNNING LIGHT RELAY NO. 2 (POINT SIDE) " HEAD (UPR±LH) FUSE " TERMINAL 1 OF THE HEAD LH±HI "
TERMINAL 2 " TERMINAL 2 OF THE HEAD RH±HI " TERMINAL 1 " TERMINAL 4 OF THE DAYTIME RUNNING LIGHT RELAY NO. 3 "
TERMINAL 2 " TO GROUND, SO BOTH TAIL AND HEADLIGHT UP.
THIS IS HOW THE DAYTIME RUNNING LIGHT SYSTEM OPERATES. ONCE THE DAYTIME RUNNING LIGHT SYSTEM OPERATES AND
HEAD HAVE LIGHT UP, HEAD REMAIN ON EVEN IF THE PARKING BRAKE LEVER IS PULLED UP (PARKING BRAKE SW ON).
EVEN IF THE ENGINE STALLS WITH THE IGNITION SW ON AND THERE IS NO VOLTAGE FROM TERMINAL L OF THE GENERATOR
(ALTERNATOR), HEAD REMAIN ON. IF THE IGNITION SW IS THEN TURNED OFF, AND HEAD ARE TURNED OFF.
IF THE ENGINE IS STARTED WHILE THE PARKING BRAKE LEVER IS RELEASED (PARKING BRAKE SW OFF), THE DAYTIME RUNNING
LIGHT SYSTEM OPERATES AND TAIL, HEADLIGHT UP AS THE ENGINE STARTS.
2. HEADLIGHT OPERATION
*(WHEN THE LIGHT CONTROL SW AT THE HEAD POSITION)
WHEN THE LIGHT CONTROL SW IS SET TO HEAD POSITION, THE CURRENT FLOWING TO THE HEADLIGHT RELAY (COIL SIDE)
FLOWS TO TERMINAL 3 OF THE INTEGRATION RELAY " TERMINAL 4 " TERMINAL 13 OF THE LIGHT CONTROL SW " TERMINAL 11
" GROUND, TURNING THE HEADLIGHT RELAY ON.
THIS CAUSES THE CURRENT FLOWING TO THE HEADLIGHT RELAY (POINT SIDE) " DRL FUSE " DAYTIME RUNNING LIGHT RELAY
NO. 3 (COIL SIDE) AND DAYTIME RUNNING LIGHT RELAY NO. 4 (COIL SIDE) " GROUND, TURNING THE DAYTIME RUNNING LIGHT
RELAY NO. 3 AND NO. 4 ON. ALSO, CURRENT FROM THE HEADLIGHT RELAY (POINT SIDE) TO HEAD (LWR) FUSES " TERMINAL 1
OF THE HEADLIGHTS (LO) " TERMINAL 2 " GROUND, SO THE HEADLIGHTS (LO) LIGHT UP.
*(DIMMER SW AT FLASH POSITION)
WHEN THE DIMMER SW IS SET TO FLASH POSITION, CURRENT FLOWS FROM HEADLIGHT RELAY (COIL SIDE) " TERMINAL 14 OF
THE DIMMER SW " TERMINAL 9 " GROUND, TURNING THE HEADLIGHT RELAY ON. AT THE SAME TIME, SIGNALS ARE OUTPUT
FROM TERMINAL 12 AND TERMINAL 14 OF THE DIMMER SW TO TERMINAL 16 AND TERMINAL 5 OF THE DAYTIME RUNNING LIGHT
RELAY (MAIN), ACTIVATING THE DAYTIME RUNNING LIGHT RELAY (MAIN) AND ALSO THE DAYTIME RUNNING LIGHT RELAY NO. 2.
WHEN THE HEADLIGHT RELAY AND DAYTIME RUNNING LIGHT RELAY (MAIN) ARE ACTIVATED, THE HEADLIGHTS (LO AND HI) THEN
LIGHT UP.
*(DIMMER SW AT HIGH POSITION)
WHEN THE LIGHT CONTROL SW IS SET TO HEAD POSITION, A SIGNAL IS OUTPUT FROM TERMINAL 13 OF THE LIGHT CONTROL SW
" TERMINAL 4 OF THE INTEGRATION RELAY " TERMINAL 3 " TERMINAL 5 OF THE DAYTIME RUNNING LIGHT RELAY (MAIN).
WHEN THE DIMMER SW IS SET TO HIGH POSITION, A SIGNAL IS OUTPUT FROM TERMINAL 12 OF THE DIMMER SW TO TERMINAL 16
OF THE DAYTIME RUNNING LIGHT RELAY (MAIN). THESE SIGNALS ACTIVATE DAYTIME RUNNING LIGHT RELAY NO. 2, SO CURRENT
FLOWS FROM DAYTIME RUNNING LIGHT RELAY NO. 2 (POINT SIDE) " HEAD (UPR±LH) FUSE " TERMINAL 1 OF THE HEADLIGHT
LH±HI " TERMINAL 2 " DAYTIME RUNNING LIGHT RELAY NO. 4 (POINT SIDE) " GROUND, AND CURRENT ALSO SIMUTANEOUSLY
FLOWS FROM HEAD (UPR±RH) FUSE " DAYTIME RUNNING LIGHT RELAY NO. 3 (POINT SIDE) " TERMINAL 1 OF THE HEADLIGHT
RH±HI " TERMINAL 2 " DAYTIME RUNNING LIGHT RELAY NO. 4 (POINT SIDE), CAUSING THE HEADLIGHTS (HI SIDE) TO LIGHT UP.
D 4 DAYTIME RUNNING LIGHT RELAY (MAIN)
2±GROUND : APPROX. 12 VOLTS WITH THE IGNITION SW AT ON POSITION
15±GROUND : ALWAYS APPROX. 12 VOLTS
8±GROUND : CONTINUITY WITH THE PARKING BRAKE LEVER PULLED UP (PARKING BRAKE SW ON)
13±GROUND : ALWAYS CONTINUITY
SYSTEM OUTLINE
SERVICE HINTS