TOYOTA CAMRY 1997 Owners Manual

Page 201 of 215

205
Removing cover clips
Installing cover clips
ÐRear side marker, rear turn
signal, stop and tail lights
ProCarManuals.com

Page 202 of 215

206
a: Rear side marker light
b: Rear turn signal light
c: Stop and tail lighta: Back-up light
b: Tail light
ÐBack-up and tail lights
(type A)
ProCarManuals.com

Page 203 of 215

207
Use a flat-bladed screwdriver.Removing the cover clips
Installing the cover clipsa: Back-up light
b: Tail light
ÐBack-up and tail lights
(type B)
ProCarManuals.com

Page 204 of 215

208
Use a phillips-head screw driverRemoving the cover clips
Installing the cover clips
ÐLicense plate lights
ProCarManuals.com

Page 205 of 215

209
ÐHigh mounted stoplight
ProCarManuals.com

Page 206 of 215

mm (in.)
Part 8Dimensions and weight
211
SPECIFICATIONS
Dimensions and weight
Engine
Fuel
Service specifications
Tires
FusesP195/70R 14 tire
Overall length 4783 (188.3)
Overall width 1780 (70.1)
Overall height 1416 (55.7)*

Wheelbase 2670 (105.1)
Front tread 1547 (61.0)
Rear tread 1520 (59.8)P205/65R 15 tire
4783 (188.3)
1780 (70.1)
1419 (55.9)*

2670 (105.1)
1547 (61.0)
1520 (59.8)
Vehicle capacity weight
(occupants + luggage)
kg(lb): 410 (900)
*1: Unladen vehicle
ProCarManuals.com

Page 207 of 215


212
Model:
5S-FE and 1MZ-FE
Type:
5S-FE engine
4 cylinder in line, 4 cycle, gasoline
1MZ-FE engine
6 cylinder V type 4 cycle, gasoline
Bore and stroke, mm (in.):
5S-FE engine
87.0 X 91.0 (3.43 X 3.58)
1MZ-FE engine
87.5 X 83.0 (3.44 X 3.27)
Displacement, cm
3 (cu. in):
5S-FE engine
2164(132.0)
1MZ-FE engine
2995(182.8)Fuel type:
5S-FE engine
Unleaded gasoline, Research Oc-
tane Number 91 (Octane Rating 87)
or higher
1MZ-FE engine
Unleaded gasoline, Research Oc-
tane Number 91 (Octane Rating 87)
or higher.
For improved vehicle performance,
the use of premium unleaded gaso-
line with a Research Octane Number
of 96 (Octane Rating 91) or higher is
recommended.
Fuel tank capacity, L (gal., Imp. gal.):
70(18.5, 15.4)ENGINE
Valve clearance (engine cold), mm (in.)
5S-FE engine
Intake 0.19'0.29 (0.007'0.011)
Exhaust 0.28'0.38 (0.011'0.015)
1MZ-FE engine
Intake 0.15'0.25 (0.006'0.010)
Exhaust 0.25'0.35 (0.010'0.014)
Spark plug type:
DENSO PK20TR11
NGK BKR6EKPB11
Spark plug gap, mm (in.):
1.1 (0.043)
Drive belt tension measured with Bor-
oughs drive belt tension gauge No.
BT-33-73F (used belt), Ibf:
5S-FE engine
With air conditioning
Generator belt 130 + 10
Power steering pump belt 80 + 20
Without air conditioning
Generator belt 95 + 20
Power steering pump belt 80 + 20
1MZ-FE engine 115 + 20
Engine Fuel Service specifications
ProCarManuals.com

Page 208 of 215

213
ENGINE LUBRICATION
Oil capacity (drain and refill), L (qt., Imp.
qt.):
5S-FE engine
With filter 3.6 (3.8, 3.2)
Without filter 3.4 (3.6, 3.0)
1MZ-FE engine
With filter 4.7 (5.0, 4.1)
Without filter 4.5 (4.8, 4.0)
Oil grade:
API SH, Energy-Conserving IIº multi-
grade engine oil or ILSAC multigrade
engine oil is recommended.
Recommended oil viscosity (SAE):
Temperature range anticipated before next oil
change.
L70010
COOLING SYSTEM
Total capacity, L (qt., Imp.):
5S-FE engine 6.9 (7.3, 6.1)
1MZ-FE engine 9.1 (9.6, 8.4)
Coolant type:
With ethylene-glycol antifreeze
(Do not use alcohol type.)
BATTERY
Open voltage* at 20 C (68 F):
12.7 V Fully charged
12.3 V Half charged
11.9 V Discharged
*: Voltage that is checked 20 minutes af-
ter the key is removed with all the lights
turned off
Charging rates: 5 A max.CLUTCH
Pedal freeplay, mm (in.):
5'15 (0.2'0.6)
Fluid type:
SAE J1703 or FMVSS No. 116 DOT 3
MANUAL TRANSAXLE
Oil capacity, L (qt., Imp. qt.):
5S-FE engine 2.6 (2.7, 2.3)
1MZ-FE engine 4.2 (4.9, 4.0)
Oil type:
Multipurpose gear oil API GL-4 or GL-5
Recommended oil viscosity:
SAE 75W-90
AUTOMATIC TRANSAXLE
Automatic transmission
Fluid capacity (drain and refill),
L (qt., Imp. qt.):
5S-FE engine Up to 2.5 (2.6, 2.2)
1MZ-FE engineUp to 3.5 (3.7, 3.1)
Fluid type:
Automatic transmission fluid D-II or
DEXRON
[III (DEXRON[II)
ProCarManuals.com

Page 209 of 215


214
Differential
Fluid capacity, L (qt., Imp. qt.):
5S-FE engine 1.6 (1.7, 1.4)
1MZ-FE engine 0.85 (0.9, 0.7)
Fluid type:
Automatic transmission fluid D-II or
DEXRON
[III (DEXRON[II)
BRAKES
Minimum pedal clearance when de-
pressed with the pressure of 490 N (50
kgf, 110 lbf) with the engine running, mm
(in.):
70 (2.8)
Pedal freeplay, mm (in.):
1'6 (0.04'0.24)
Pad wear limit, mm (in.):
1.0 (0.04)
Lining wear limit, mm (in.):
1.0 (0.04)
Parking brake adjustment when pulled
with the force of 196 N (20 kgf, 44 lbf):
6'9 clicks
Fluid type:
SAE J1703 or FMVSS No. 116 DOT 3STEERING
Wheel freeplay:
Less than 30 mm (1.2 in.)
Power steering fluid type:
Automatic transmission fluid DEX-
RON
[II or III
ProCarManuals.com

Page 210 of 215

215
Normal drivingkPa (kgf/cm2 or bar, psi)
For all loads including full rated loadsFor reduced loads (1 to 4passengers)For all loads including full rated loadsFor reduced loads (1 to 4 passengers)
Tire sizeFrontRearFrontRearWheel size
P195/70R14 90S210(2 1 30)210 (2.1, 30)210 (2.1, 30)210 (2.1, 30)14 x 5.5JJP195/70R14 90S210 (2.1, 30)210 (2.1, 30)210 (2.1, 30)210 (2.1, 30)14 x 5.5JJ
P205/65R15 92S215/70R 16 99220 (2 2 32)200 (2 0 29)200 (2 0 29)15 x 6JJP205/65R15 92S215/70R 16 99220 (2.2, 32)200 (2.0, 29)200 (2.0, 29)15 x 6JJ
Trailer towingkPa (kgf/cm2
or bar, psi)
Tire size
FrontRear
P195/70R14 90S210 (2.1, 30)210 (2.1, 30)
P205/65R15 92H220 (2.2, 32)220 (2.2, 32)
When driving under the above vehicle load conditions at sustained high speeds abve 160 km/h (100 mph), in countries where such
speeds are permitted by-law, inflate the front and rear tires to 240 kPa (2.4 kgf/cm2
or bar, 35 psi) provided that it does not exceed
the maxium cold tire pressure molded on the tire sidewall.
Wheel nut torque, NVm (kgfm, ftVlbf):
104 (10.5, 77)
Tires
ProCarManuals.com

Page:   < prev 1-10 ... 161-170 171-180 181-190 191-200 201-210 211-220 next >