TOYOTA COROLLA 1999 Owners Manual

C orolla (U)
202
2. LEFT- HAND HEADLIGHT: Remove the
clip and take out the air cleaner
duct.
Remove and install the cover clip as
shown in the following illustration.Removing clip: Use a flat- bladed screw-
driver or equivalent
Installing clip
3. Unplug the connector. Remove the
rubber cover.
If the connector is tight, wiggle it.
ProCarManuals.com

C orolla (U)
203
4. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.5. Install the rubber cover with the
ºTOPº mark upward, and snuggle on
the boss. Insert the connector.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.Use a Phillips- head screwdriver.
ÐParking, front side marker
and front turn signal lights
ProCarManuals.com

C orolla (U)
204
Removing and installing clips (type A): Use
a flat- bladed screwdriver or equivalent.
ÐRear side maker, rear turn
signal, and stop and tail
lights
ProCarManuals.com

C orolla (U)
205
Removing clips (type B): Use a Phillips-
head screwdriver.
Installing clips (type B)
a: Stop and tail light
b: Rear turn signal light
c: Rear side marker light
ProCarManuals.com

C orolla (U)
206
ÐBack- up lights
ÐLicense plate lights
( lef t sid e)
ProCarManuals.com

C orolla (U)
207
ÐLicense plate lights
(right side)
ProCarManuals.com

C orolla (U)
208
ÐHigh mounted stoplight
ProCarManuals.com