CD player TOYOTA LAND CRUISER 2002 J100 Navigation Manual

18(d) Operating an audio CD
(i) Playing an audio CD
unx610
Push the number of the disc you want to
play. The selected disc is automatically
played. (ii) Selecting a desired track
UNC622a
TRACKº button: Use for direct access to
a desired track.
Push either side of the TRACKº
button and
hold it until the desired track number appears
on the display. As you release the button, the
player will start playing the selected track
from the beginning.
Fast forward: Touch the 
º switch and
hold it to fast forward the disc. When you re-
lease the switch, the player will resume play-
ing from that position.
Reverse: Touch the 
º switch and hold it
to reverse the disc. When you release the
switch, the player will resume playing. (iii) Searching for a desired track or a
disc
unx012
Touch the SCANº switch.
SCANº will be highlighted in green. The
player will play the next track for 10 seconds,
then scan again. To select a track, touch the
SCANº switch a second time. If the player
reaches the end of the disc, it will continue
scanning at track 1.

19
Touch the DISK SCANº switch.
DISC SCANº will be highlighted in green.
The program at the beginning of each disc
will be played for 10 seconds. To continue lis-
tening to the program of your choice, touch
the DISC SCANº switch a second time.
After all the audio disc are scanned in one
pass, normal play resumes.
(iv) Other functions
unx013
RPTº
switch: Use it for automatic repeat of
the track you are currently listening to.
Touch the switch while the track is playing.
When the track is finished, the player will au-
tomatically go back to the beginning of the
track and play the track again. To cancel it,
touch the switch once again.
DISC RPTº switch: Use it for automatic re-
peat of the disc you are currently listening to.
Touch the switch while the disc is playing.
When the disc is finished, the player will auto-
matically go back to the beginning of the disc
and play the disc again. To cancel it, touch
the switch once again. RANDº switch: Use it for automatic and
random selection of the disc which you are
currently listening to.
When the switch is touched, the system se-
lects a track in the disc you are currently lis-
tening
to. To cancel it, touch the switch once
again.
DISC RANDº switch: Use it for automatic
track selection for all the audio discs and play
by the system.
When the switch is touched, the system se-
lects a track in all the audio discs in the mag-
azine which is set and plays it. To cancel it,
touch the switch once again.

20(e) Operating a DVD video disc
Precautions: The playback condition of
some DVD video discs may be determined
by a DVD video software producer. This
DVD player plays a disc as the software pro-
ducer intended. So some functions may not
work prop
erly. Be sure to read the instruction
manual for the DVD video disc separately
provided. (i) DVD video discs
This DVD player conforms to NTSC color
TV formats. The DVD video disc conform-
ing to another formats such as PAL or SE-
CAM cannot be used.
Region codes: Some DVD video discs
have a region code indicating a country
where you can use the DVD video disc on
this DVD player. If the DVD video disc is not
labeled as ALLº or 1º, you cannot use it on
this DVD player. If you attempt to play an in-
appropriate DVD video disc on this player,
REGION CODE ERRORº appears on the
screen. Even if the DVD video disc does not
have a region code, there is a case that you
cannot use it. Marks shown on DVD video discs:
indicates NTSC format
of color TV.
indicates the number
of audio tracks.
indicates the number
of language subtitles.
indicates the number
of angles.
indicates the screen
to be selected.
Wide screen: 16:9
Standard: 4:3
indicates a region code
by which this video disc
can be played.
ALL: in all countries
Number: region code

21
(ii) DVD video disc glossary
DVD video discs: DVD in which animated
pictures are memorized. DVD video discs
have adopted MPEG2º, one of the world
standards of digital compression technolo-
gies. The picture data is compressed by
1/40 on average and memorized. The vari-
able rate encoded technology in which the
volume of data assigned to the picture is
changed depending on the picture format
has also been adopted. Audio data is memo-
rized using PCM and Dolby digital, which en-
ables higher quality of sound. Furthermore,
multi-angle and multi-language features will
also help you enjoy more advanced technol-
ogy of DVD video.
Viewer restrictions: This feature limits the
viewers in conformity with a level of restric-
tions of the country. The level of restrictions
varies depending on the DVD video disc.
Some DVD video discs cannot be played at
all, or violent scenes are skipped or replaced
with other scenes.
Level 1: DVD video discs for children can be
played.
Level 2 - 7: DVD video discs for children and
G-rated movie can be played.
Level 8: All types of the DVD video discs can
be played. Multi-angle feature: You can enjoy the
same scene at different angles.
Multi-language feature: You can select a
language of the subtitle and audio.
Region codes:
The region codes are pro-
vided on DVD players and DVD discs. If the
DVD video disc does not have the same re-
gion code as on the DVD player, you cannot
play the disc on the DVD player.
Audio: This DVD player can play liner PCM
and Dolby digital and MPEG audio format
DVD. Other decorded type cannot be play-
able.
Title and chapter: Video and audio pro-
grams stored in DVD video disc are divided
in parts by title and chapter.
Title: The largest unit of the video and audio
programs memorized in DVD video discs.
Usually, one piece of movie, one album, or
one audio program is assigned as a title.
Chapter: The unit smaller than that of title.
A title comprises plural chapters. Manufactured under license from Dolby
Laboratories. Dolbyº, Pro Logicº, and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpub-
lished works.

1992- 1997 Dolby Laboratories. All
rights reserved.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be autho-
rized by Macrovision Corporation, and is
intended for home and other limited view-
ing uses only unless otherwise autho-
rized by Macrovision Corporation. Re-
verse engineering or disassembly is
prohibited.
DTSº is a trademark of Digital Theater
Systems, Inc.

24(vii) Searching by title
unx622
Enter the title number using -º, +º and
+10º switches and touch Enterº. The
player starts playing video for that title
number.
When you push 

º or º on the TRACKº
switch, you can select a chapter.
Touch Returnº, the previous screen returns. (viii)Changing the subtitle language
unx620
Each time you touch Sub Titleº, the lan-
guage is se
lected from the ones stored in
the discs and changed.
To turn off the subtitle, touch Hideº.
Touch Returnº, the previous screen returns. (ix) Changing the audio languageEach time you touch Audioº, the lan-
guage is sel
ected from the ones stored in
the discs and changed.
Touch Returnº, the previous screen returns.

30If you touch the part where switches are not
located while you are watching video on the
video CD, video CD operation switches will
appear.

Second Pageº switch: Use this switch to
display the operation switches on the sec-
ond page.
Top Pageº switch:Use this switch to dis-
play the operation switches on the top page.
Hide Keysº switch: Use this switch to turn
off the operation switches from the display.
If 
º appears on the display when you
touch the switch, the operation is not per-
mitted. (iii) Description of each switch
 Switches on top page
D. Menu Nextº switch: When you touch
this switch while the disc menu is displayed,
the next page appears on the display. If you
touch this switch while the player is playing
video, the next track is searched and played.
D. Menu Prev.º switch: When you touch
this switch while the disc menu is displayed,
the previous page appears on the screen. If
you touch this switch while the player is play-
ing video, the previous track is searched and
played.
Sel. Numberº switch: The track or num-
ber search screen appears. (See Searching
by trackº on the next page.)
Main/Subº switch: A multiplex transmis-
sion changing switch. The mode changes
from Main/Sub to Main, to Sub and back to
Main/Sub by touching this switch.

º switch: The video CD menu ap-
pears. (For the operation, see the instruction
manual for the video CD provided separate-
ly.) 
Switches on second page

º switch: Use this switch to pause the
video screen. When you touch this switch
again, the video screen advances by frame
by frame.
  º switch: Touch this switch during the
pause to resume playing.
  º switch: Touch this switch to fast re-
verse during the playback.
  º switch: Touch this switch to fast for-
ward during the playback and start playing
slowly during the pause.
PBCº switch: Use this switch to turn off
playback control.

31
(iv) Searching by track
unx626
Enter the track numbers using -º, +º
and +10º switches and touch Enterº.
The player starts playing video for that
title number.
You can select a track number by pushing


º or º on the TRACKº button.
Touch Returnº, the previous screen returns.
(h) If the player malfunctions
If the player or another unit equipped with the
player malfunction, your audio system will
display one of the six following messages.
If DISC CHECKº appears on the display:
It indicates that the disc dirty, damaged, or it
was inserted up-side down. Clean the disc
or insert it correctly.
If NO DISCº appears on the display: It in-
dicates that there is no disc in the DVD play-
er.
If REGION CODE ERRORº appears on
the display: It indicates that the DVD region
code is not set properly.
If DVD DOOR OPENº appears on the dis-
play: It indicates that the door of the DVD
player is open.
If DVD ERRORº appears on the display:
It indicates that the inside of the player unit
may be too hot due to the very high ambient
temperature. Remove the magazine from
the player and allow the player to cool down.
If NO DVD MAGAZINEº appears on the
display: It indicates that the magazine is not
inserted into the DVD player.
If the malfunction is not rectified: Take
your vehicle to your Toyota dealer.
NOTICE
To ensure correct audio system opera- tion:
Be careful not to spill beveragesover the audio system.
Do not put anything other than a cas-sette tape or magazine into the cas-
sette tape slot or DVD player.
The use of a cellular phone inside ornear the vehicle may cause a noise
from the speakers of the audiosystem which you are listening to.
However, this does not indicate amalfunction.
Radio reception
Usually, the problem with radio reception
does not mean there is a problem with your
radio - it is just the normal res ult of conditions
outside the vehicle.
Car audio system operating
hints

32For example, nearby buildings and terrain
can interfere with FM reception. Power lines
or telephone wires can interfere with AM sig-
nals. And of course, radio signals have a lim-
ited range, and the farther you are from a sta-
tion, the weaker its signal will be. In addition,
reception conditions change constantly as
your vehicle moves.
Here are some common reception
problems
that probably do not indicate a problem with
your radio:
FM
Fading and drifting stations - Generally,
the effective range of FM is about 40 km (25
miles). Once outside this range, you may no-
tice fading and drifting, which increase with
the distance from the radio transmitter. They
are often accompanied by distortion.
Multi-path - FM signals are reflective, mak-
ing it possible for two signals to reach your
antenna at the same time. If this happens,
the signals will cancel each other out, caus-
ing a momentary flutter or loss of reception.
Static and fluttering - These occur when
signals are blocked by buildings, trees, or
other large objects. Increasing the bass lev-
el may reduce static and fluttering. Station
swapping - If the FM signal you are
listening to is interrupted or weakened, and
there is another strong station nearby on the
FM band, your radio may tune in the second
station until the original signal can be picked
up again.
AM
Fading - AM broadcasts are reflected by the
upper atmosphere - especially at night.
These reflected signals can interfere with
those received directly from the radio station,
causing the radio station to sound alternately
strong and weak.
Station interference - When a reflected sig-
nal and a signal received directly from a radio
station are very nearly the same frequency,
they can interfere with each other, making it
difficult to hear the broadcast.
Static - AM is easily affected by external
sources of elec trical noise, such as high ten-
sion power lines, lightening, or electrical mo-
tors. This results in static.
Caring for your cassette player and tapes
For high performance from your cassette
player and tapes:
Clean the tape head and other parts regular-
ly. 
A dirty tape head or tape path can de-
crease sound quality and tangle your cas-
sette tapes. The easiest way to clean
them is by using a cleaning tape. (A wet
type is recommended.)
Use high-quality cassettes:
 Low-quality cassette tapes can cause
many problems, including poor sound, in-
consistent playing speed, and constant
auto-reversing. They can also get stuck
or tangled in the cassette player.
 Do not use a cassette if it has been dam-
aged or tangled or if its label is peeling off.
 Do not leave a cassette in the player if you
are not listening to it, especially if it is hot
outside.
 Store cassettes in their cases and out of
direct sunlight.
 Avoid using cassettes with a total playing
time longer than 100 minutes (50 minutes
per side). The tape used in these cas-
settes is thin and could get stuck or
tangled in the cassette player.

33
Caring for your DVD player and discs
Audio CDs
DVD video discs
Video CDs

Use only discs labeled as shown above.
CD- R(CD- Recordable), CD- RW(CD-
Re-writable) and personal computer use
CD-ROMs may not be playable on your
DVD player.
 Your DVD player is intended for use with
12 cm (4.7 in.) discs only.
 Extremely high temperature can keep
your DVD player from working. On hot
days, use air conditioning to cool the ve-
hicle interior before you listen to a disc. 
Bumpy roads or other vibrations may
make your multi-disc player skip.
 If moisture gets into your DVD player, you
may not hear any sound even though your
DVD player appears to be working. Re-
move the magazine from the player and
wait until it dries.
Z17035

34
Your DVD player cannot play special
shaped, labeled or low-quality discs as
those shown here. Do not use them as
the player could be damaged.
 Handle discs carefully, especially when
you set them into the magazine. Hold
them on the edge and do not bend them.
Avoid getting fingerprints on them, partic-
ularly on the shiny side.
 Dirt, scrapes, warping, pin holes, or other
disc damage could cause the player to
skip or to repeat a section of a track. (To
see a pin hole, hold the disc up to the
light.)
 Remove discs from the DVD player when
you are not listening to them. Store them
in their plastic cases away from moisture,
heat, and direct sunlight.
To clean a disc: Wipe it with a soft, lint-free
cloth that has been dampened with water.
Wipe in a straight line from the center to the
edge of the disc (not in a circle). Do not use
a conventional record cleaner or anti-static
device.
CAUTION
DVD players use an invisible laser
beam which could cause hazardous
radiation exposure if directed outside
the unit. Be sure to operate the player
correctly.