navigation TOYOTA LAND CRUISER 2002 J100 Navigation Manual

37

When the tires are worn.
 After replacing a tire or tires.
 When using tires that are smaller or larger
than the factory specifications.
 When the tire pressure in any of the four
tires is not correct.
INFORMATION
If your vehicle cannot receive GPS sig-
nals, you can correct the current posi-tion manually. For the information onsetting the current position calibration,see page 59.
 When turning at a wrong intersection off
the designated route guidance.
 If you are heading for a destination with-
out passing through a set way point, auto-
matic rerouting may display a route re-
turning to the set way point.
 When turning at an intersection, there is
no route guidance.
 When passing through the intersection,
there is no route guidance.
 During automatic rerouting, the route
guidance may not be available for the next
turn to the right or left.
 It may take a long time to operate auto-
matic rerouting during high speed driving.
In automatic rerouting, a detour route may
be shown.
 During aut omatic rerouting, the route may
not be changed.
 The route in a U-turn may be shown or
announced.
 A location may have multiple names and
the system will announce one or more. 
Some routes may not be searched.
 If the route to your destination includes
gravel, unpaved roads or alleys, the route
guidance may not be shown.
 Your destination point might be shown on
the opposite side of the street.
 When a portion of the route has regula-
tions prohibiting the entry of the vehicle
that vary by time or season or other rea-
son.
 The road and map data stored in your
navigation system may not be complete
or may not be the latest release.
When replacing the tire(s), contact your
dealer.
This navigation system uses the tire turning
data and is designed to work with factory-
specified tires for your T oyota. Installing tires
that are larger or smaller than the originally
equipped diameter may cause inaccurate
display of the vehicle's position. The tire
pressure also affects the diameter of the tires
so please make sure the tire pressure of all
four tires is correct.
(b) Inappropriate route guidance
may occur in the following
cases
:

59
The current vehicle position mark will be
automatically corrected during driving
on reception of GPS signals. If your ve-
hicle cannot receive GPS signals, you
can correct the current position mark
manually.
UN112
1. Push the ºMENUº button on the bez-
el to display the ºMenuº screen, and then
touch the
ºSystem Optionº switch.
UN113
2. Touch the ºPositionº switch.
INFORMATION
For additional information on current position accuracy, see ºLimitations ofthe Navigation Systemº on page 35.

Position
UN114
1. Touch the scroll arrows to move the
cursor to your desired location.
Touch the
ºEnterº switch.
Current Position Calibration

1
Map Database Information and updates
Map database is made based on the maps, 1999 edition of
DENSO, whose information source comes from NavTech
maps and GDT maps.

1999 Navigation Technologies. All rights reserved.

GDT, Geographic Data Technology, Inc.
This product contains proprietary and confidential property of
Geographic Data Technology, Inc. Unauthorized use, includ-
ing duplication of this product is expressly prohibited. There
are two types of areas available for route guidance. (See
the following pages.) In one type of area, primarily around
metropolitan centers, detailed route guidance is available for
the entire area. In the other type of area, all roads are dis-
played on the map but route guidance is limited. The naviga-
tion route might lack precision because the data (no right
turns, one-way traffic, etc.) is not completed. It is still possible
to reach the destination by following the arrow direction and
distance as shown on the bottom left of the screen. The arrow
points in the direction of the destination. The distance shown
is as measured in a straight line from the current vehicle posi-
tion to the destination area.
UN200