TOYOTA LAND CRUISER 2002 J100 Navigation Manual

17
UN029
Touch the of your desired item. After
inputting the two intersecting streets, the
screen changes and displays the map
location of the selected destination and
the route preference. (See ºEntering
Destinationº on page 19.)
EMV3111U
If the same two streets cross at more than
one intersection, the screen changes and
displays the menu to select the city name
where the streets intersect. Select the city,
and the map location of the selected destina-
tion and the route preference. (See ºEnter-
ing Destinationº on page 19.) To input a freeway entrance or exit, touch
the
ºFwy Entrance/Exitº switch on
the destination input screen.
UN030
Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an ºIº (I-405). US high-
ways use the state designation before the
number (CA-118).
As the number of matching freeways de-
creases, you can touch the
ºListº switch to
display the list. When the number of sites be-
comes 4 or less, the list screen appears au-
tomatically.
Destination Input by FREEWAY
ENTRANCE or EXIT

18
UN031
Select the desired freeway by touching
the .
UN032
You can then select either a freeway ºEn-
tranceº
or ºExitº.
UN033
Touch the of the desired entrance or
exit name. The screen changes and dis-
plays the map location of the selected
destination and the route preference.
(See ºEntering Destinationº on page 19.) There are 2 ways to list the freeway en-
trance or exit.
Dist Sort: Touch this switch to list the en-
trances or exits in order of distance from your
current location.UN034
Name
Sort: Touch this switch to list the en-
trances or exits in alphabetical order.

19
Touch the
ºPrevious Starting
Pointº
switch on the destination screen.
The screen changes and displays the
map location of the previous starting
point and the route preference. (See ºEn-
tering Destinationº.)
If you have not used the navigation yet, the
ºPrevious Starting Pointº switch is
dimmed. Touch
the
ºMapº switch on the destina-
tion screen.
UN035
The screen changes and displays the
map location of the current position and
the route preference. (See ºEntering
Destinationº.) After you input the destination by one of
the ten methods, the screen changes and
displays the map location of
the selected
destination and the route preference.
You can move and set the cursor at a de-
sired point. (For the method of how to move
the cursor, see page 3.)
When you touch the
ºEnterº switch, the
system starts searching for a route to your
destination using the conditions entered.
Route Preference
Touch the
ºChangeº switch to change the
conditions which are to determine the route
to your destination.
Destination Input by PREVIOUS
STARTING POINT Destination Input by MAP Entering Destination

20You are given a number of choices on the
conditions which the system uses to deter-
mine the route to your destination.
UN202
Touch the Onº switch of ºMinimize
Freeway Useº to search for a route other
than freeways as much as possible. (In
some cases, the route cannot avoid running
on a freeway.)
Touch the
Onº switch of ºMinimize Toll
Road Useº to search for a route other than
toll roads as much as possible.
Touch the
Onº switch of ºMinimize
Ferry Useº to search for a route without us-
ing a ferry as much as possible.
The switches you select are highlighted in
green. After choosing conditions, touch the
ºEnterº switch.
UN037
During the route search, ºRoute Search-
ingº appears at the top of the screen and
changes color from the left. When the
search is completed, three types of
routes are displayed on the screen.
UN038
Touch the ºNextº switch to choose one
from the three routes. Route 1:
A route on which you can reach the
destination in the shortest time.
Route 2: A route on which you can reach the
destination in the shortest distance.
Route 3: Other route.
After selecting one, you can start the route
guidance by touching the
ºStartº switch or
starting to move your vehicle.
If you want to set a way point between the
starting point and the destination or change
the search condition, touch the
ºChg.
Routeº
switch. The screen changes and
displays the change route menu. (For de-
tails, see page 22.)
When you keep touching the
ºStartº
switch until you hear a beep, Demo Mode will
start.

21
The route guidance system displays two
different screen modes.
UN039
Single screen:
Only map is shown in a
screen mode.
UN040
Split screen: Map and guidance screen are
shown in a screen mode. (For detail about
Guidance screen, see page 33.)
The two route guidance screens have a
number of indicators and switches with
which you should be familiar.
Map/Guide: To change two screen modes.
[GPS]: Upon reception of signals from the
GPS (Global Positioning System), this mark
appears. (For details, see page 35.)
zoom IN / zoom OUT: Magnifies or reduces
the map scale. (For details, see page 33.) POI:
Touch this switch, and symbols of
points of interest are shown on the screen.
(For details, see page 29.)
Mark: Touch this switch for one-touch regis-
tration of the marked point. (For details, see
page 53.)
INFORMATION
The distance to your destination ap- pears on the left of the screen.
The time to your destination can alsobe displayed. (For the setting steps,see page 2.)
Route Guidance Screen

22Chg. Route: The ºChange Routeº screen
appears and the following settings are avail-
able.
Reroute:
To change the condition for Re-
route.
Detour: To change the condition for Detour.
(For details, see page 28.)
Way point: To set and delete a way point.
(For details, see page 54.)
Route Preference: To change the condi-
tions of the route preference. (For details,
see page 19.)
Cancel Guidance: To stop the route guid-
ance. When you touch this switch, the map
screen appears.
INFORMATION
If the calculated route includes a trip by ferry, the route guidance shows a searoute. After you travel by ferry, the cur-rent vehicle position may be incorrect.Upon reception of GPS signals, it is au-
tomatically corrected.
UN042
The current vehicle position mark ap-
pears in the center of the map screen.
You can return to this map screen show-
ing your current position at any time from
any screen by pushing the
ºMAP/
VOICEº
button on the bezel.
During driving, the current vehicle position
mark is fixed in the center of the screen and
the map moves.
If you move the map with a ºone- touchº
scroll (see page 34 for details), the current
vehicle position mark continues to track your
current location.
Current Position Display

23
INFORMATION
When you use the ºone-touchº scrollfeature, the current vehicle positionmark may disappear from the screen.Move the map with a ºone-touchºscroll again or push the
ºMAP/
VOICEº button on the bezel to return
to the current vehicle position map
location display.
The current position is automatically set
as your vehicle receives signals from the
GPS (Global Positioning System). If your
current position is not correct, it is auto-
matically corrected after your vehicle re-
ceives signals from the GPS.
INFORMATION
After the battery disconnection, or ona new vehicle, the current position maynot be correct. As soon as the systemreceives signals from the GPS, the cor-
rect current position is displayed.
If you must correct the current position
manually, follow the steps on page 59. Voice
route guidance is offered automati-
cally during route guidance. Use voice
guidance just for your reference.
You can adjust the volume of the voice or turn
off voice guidance.
UN043
Push the ºMENUº button on the bezel to
display the menu screen. Then touch any
number at the bottom of the screen to se-
lect the desired volume. If you do not
need voice guidance, touch the
ºOFFº
switch.
The selected item is highlighted in green. You can listen to ºVoice route guidanceº by
pushing
the
ºMAP/VOICEº button on the
bezel, even if the volume is ºOFFº.
INFORMATION
During route guidance, the voice guid- ance continues even if the navigationscreen is changed to other screens,such as the audio screen.
Voice Guidance

24
UN301
The voice guidance provides various mes-
sages as you approach an intersection, or
other point where you need to maneuver the
vehicle.
1ºProceed about 5 miles to the T-
intersection.º
2ºIn a quarter of a mile, right turn at
the T-intersection.º
3ºAt the T-intersection, right turn.º
4Beep sound only
INFORMATION
On freeways, interstates or other high- ways with higher speed limits, thevoice guidance will be made at earlierpoints than on city streets in order to al-
low time to maneuver.
EMV3113U
1ºProceed about 4 miles to the traf-
fic circle.º
2ºIn a quarter of a mile, traffic circle
ahead, and then right turn 3rd exit
ahead.º
3ºNext exit right.º
4Beep sound only.
Typical Voice Guidance Prompts

25
EMV3114U
: The system indicates a U-turn if the dis-
tance between two one-way roads (of oppo-
site directions) is less than 15 m (50 ft.) in
residential areas or 50 m (164 ft.) in non-res-
idential areas.
1ºIn half of a mile, make a legal U-
turn.º
2ºMake a legal U-turn.º
3Beep sound only.
EMV3115U
The system announces your approach to the
final destination.
1ºYour destination is ahead.º
2ºYou have arrived at your destina-
tion. Your route guidance is now fin-
ished.º
EMV3116U
When information is available in the data-
base, the voice guidance provides lane infor-
mation when entering or exiting a freeway or
interstate.
1ºIn 2 miles, 405 freeway on the
right.º
2º405 freeway on the right and then
keep right onto 405 freeway south.º
3Beep sound only.

26
INFORMATION
If the system cannot determine thecurrent vehicle position correctly (incases of poor GPS signal reception),the voice guidance may be made ear-ly or delayed.
If you did not hear the voice guid-
ance command, push the
ºMAP/
VOICEº
button on the bezel to hear
it again.
If you register your home address before-
hand, you can easily set the route back to
your home.
UN044
1. Push the ºMENUº button on the bez-
el to display the menu screen and touch
the
ºMarked Pointº switch.
UN045
2. Touch the ºRegisterº switch of
Home for registering your home. If home is already registered, the
ºRegis-
terº
switch is dimmed.
UN046
You may register the location of your
home by three different methods: current
position, address or map location. T ouch
the screen to select your desired method
from the menu.
Registration of Your Home