TOYOTA PRIUS 2006 2.G Owners Manual

231
27p322
2. Touch the “Change” of “DeviceName” or “Passkey”.
27p323
3. Use the software keyboard to inputthe device name.
You can input up to 20 characters.
27p324
4. Input a Passkey with 4 8 digits.
When you touch “ ”, the inputted digit is
deleted.

232
27p325
5. When you complete the setting,touch “
”.
Initializing the Bluetooth settings.
You can initialize the settings.
27p326
1. Touch the “Default” switch.
27p327
2. Touch the “Yes” switch.

233

Deleting a Bluetooth phone
27p328
1. Touch the “Delete” switch of “Blue-
tooth Telephone”.
27p329
2. Select the telephone you want to de-lete and touch “OK”.
27p330
3. Touch the “Yes” switch.

234
When you delete the telephone while
another Bluetooth phone is connected,
this message is displayed.
27p331
Touch the “Yes” switch.
Displaying the information of the
Bluetooth phone you delete
You can display the information of the
Bluetooth phone before you delete it
and you can make sure whether the
telephone you delete is correct or not.
27p332
1. Select the telephone you want to display the information about.
27p319
2. When you complete confirming it,
touch “
”.

235
The speech command system enables
you to operate the handsfree system
by giving a command.
27p335
1. Push the speech command switch.
A beep sounds and on −screen message is
displayed with an indicator at the top left.
27p203
2. Give a command while an indicator is shown in the display. If you want
to check the command list, touch
the “Help” switch to display the Help
screen. (See “Help screen” on page
236.) When you touch the “Cancel”,
the previous screen returns. If the hands
−free system does not re-
spond or the confirmation screen does not
disappear, push the speech command
switch and try again.
If no command is given, a beep sounds
and the indicator disappears 6 seconds
later.
If the system does not recognize your
speech, the system will respond with this
message (“System does not recognize this
command, rephrase your command.”).
Start the operation from the beginning.
—Speech command system

236
27p334
Microphone
It is unnecessary to speak directly into
the microphone when giving a com-
mand. This system has a function which dis-
plays the voice recognition help screen.
You can see the command list and op-
erating guide on it.
(a) Command List
27p361
1. Touch the “Command List” tab on
the upper side of the screen.
2. Select the desired category by touching the buttons on the right
side of the “Command List” screen.*
3. You can scroll through the command
list by touching “
” or “”
switch.
*: For the vehicles without Navigation Sys-
tem, “Tel” only is shown.
Touch the “OK” switch after you check it. (b) Operating Guide
27p362
1. Touch the “Operating Guide” tab on
the upper side of the screen.
2. Select the desired category by touching the buttons on the right
side of the “Operating Guide”
screen.*
3. You can scroll through the list of the
operating guide by touching “
” or
“
” switch.
*: For the vehicles without Navigation Sys-
tem, “Tel” only is shown.
Touch the “OK” switch after you check it.
—Help screen

237
Adjustment
26p024a
Type 1Type 2 and Type 3
Push the “DISPLAY” button to display
the “Display” screen.
27p142a
Type 1 and Type 2
26p026b
Ty p e 3
Contrast and brightness adjustment
CONTRAST “+”:
Strengthens the contrast of the screen.
CONTRAST “–”:
Weakens the contrast of the screen.
BRIGHTNESS “+”: Brightens the screen.
BRIGHTNESS “–”: Darkens the screen.
The screen turns off when you touch the
“SCREEN OFF”. To turn the display
screen back on, push any bezel switch
such as “INFO”, etc. The selected screen
appears.

238
27p146a
Type 1 and Type 2
26P051b
Ty p e 3
Depending on the position of the head-
light switch, the screen changes to the
day mode or night mode.
To display the screen in the day mode
even with the headlight switch on, touch
“DAY MODE” on the adjustment screen for
brightness and contrast control.
However, if the km/h or MPH button is on,
mode switching cannot be done. It re-
mains in the day mode. In this case, “DAY
MODE” is not shown on the screen.
If the screen is set in the day mode with
the headlight switch turned to on, this
condition is memorized in the system even
with the hybrid system turned off.
Outside temperature display
27p155a
Type 1 and Type 2
26p046b
Ty p e 3

239
The outside temperature is shown rang-
ing from 30C (22 F) up to 50 C
(122 F) at the upper right of the energy
consumption or energy monitor screen
or the upper left of the air conditioner
screen.

240