TOYOTA PRIUS 2008 2.G Quick Reference Guide

Page 1 of 32

2008
Quick Reference Guide
POWERED
BY

Page 2 of 32

!A word about safe vehicle operations This Quick Reference Guideis a summary of
basic vehicle operations. It contains brief
descriptions of fundamental operations so you
can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guideis not intended as
a substitute for theOwner’s Manual located
in the vehicle’s glove box. We strongly
encourage you to review theOwner’s Manual
and supplementary manuals so you will have
a better understanding of the vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota
Motor Sales, U.S.A., Inc. wish you many years
of satisfied driving in your new Prius.
This Quick Reference Guideis not a full
description of Prius operations. Every
Prius owner should review the Owner’s
Manualthat accompanies this vehicle.
Pay special attention to the boxed
information highlighted in yellow
throughout the Owner’s Manual. Each box
contains safe operating instructions to
help you avoid injury or equipment
malfunction.
All information in this Quick Reference
Guideis current at the time of printing.
Toyota reserves the right to make changes
at any time without notice.
2008
Prius

Page 3 of 32

1
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
INDEX
ItemPage no.
BASIC HYBRID VEHICLE OPERATIONHybrid Synergy Drive System 2Keyless entry 6Key fob 3Parking & turning OFF the Hybrid System 9Shifting8Smart Key system 4-5Smart Key unlock functions15Turning the Hybrid System ON 7
OVERVIEWEngine maintenance 15Fuel tank door opener and cap14Hood release 15Indicator symbols 12-13Instrument cluster 12Instrument panel10-11Light control-Instrument panel14
Rear hatch 14
FEATURES/OPERATIONSAir Conditioning/Heating20-21Audio 22-23Clock 25Cruise control 21Cup and bottle holders 25
Garage door opener (HomeLink®)217Lights & turn signals16Luggage storage box 24Parking brake 25Power outlets 25Seat adjustments-Front18Seat adjustments-Rear18Seats-Head restraints 18Telephone controls (Bluetooth®)24Tilt steering wheel 19Window wipers & washers 17
Windows 19
SAFETY AND EMERGENCY FEATURESDoor locks 26Doors-Child safety locks 26Emergency flashers 27Jump starting28Rear air vent 27Seat belts 26Seat belts-Shoulder belt anchor 26Spare tire & tools 29Tire Pressure Warning System 27
1 Programmable by customer. For dealer-programmable
features, please visit your Toyota dealer.
2 HomeLink® is a registered trademark of Johnson Controls, Inc.

Page 4 of 32

2
BASIC HYBRID VEHICLE
OPERATION
Hybrid Synergy Drive System
The Hybrid Synergy Drive System utilizes a computer
controlled gasoline engine and electric motor to
provide the most efficient combination of power for
the vehicle. To conserve energy, when the brakes
are applied, braking force generates electricity
which is then sent to the traction battery. In
addition, the engine shuts off when the vehicle is
stopped. The benefits are better fuel economy,
reduced vehicle emissions and improved
performance.
Note: Fuel consumption and energy information
of the Hybrid System are shown on the
multi-information display. Refer to this
screen for important driving information
and feedback to maximize energy
use/creation and conserve fuel.
Tips for improved fuel economy
-Ensure tire pressures are maintained at levels
specified in the Owner's Manual.
-If possible, link trips to reduce engine cold starts.
-Avoid driving at speeds that are higher than
necessary, especially on the highway.
-When possible, avoid sudden stops to maximize
regenerative braking energy.
-Minimize use of the Air Conditioning.
Refer to the Owner’s Manualfor more details.

Page 5 of 32

3
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Master keyIgnition key & wireless remote.
Mechanical keyFits into master key and can be
removed to manually lock/unlock driver door only.
Ignition key slot When inserting, push completely
in. When removing, gently pull; key will be pushed
out by a spring. DO NOT FORCE THE KEY. If it
cannot be removed, push it all the way in again,
then pull it out.
To remove or replace mechanical key Slide the
lock knob in the direction of the arrow.
Key fob
Master key
Mechanical key
*
Ignition key
(key fob) slot
* Lock/Unlock the driver’s door only
Slide
Pull out

Page 6 of 32

4
BASIC HYBRID VEHICLE OPERATION
Locking operation
Front doorRear hatch
Smart Key system (if equipped)
Carrying a Smart Key allows the vehicle to be
locked, unlocked and the Hybrid System engaged
without handling the key.
Push
Push
Unlocking operation
Front door
NOTE:After unlocking, if a door is not opened
within 30 seconds, all doors will relock for safety.
Refer to your Owner’s Manualand the following
section of this guide for Smart Key unlocking
programmable options.
Rear hatch

Page 7 of 32

5
OVERVIEW BASIC HYBRID VEHICLE OPERATION
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Smart Key unlock functions(if equipped)
The Smart Key unlocking function can be
programmed to operate in three different modes
when Smart Key is activated. In all modes, grasping
the front passenger door handle will unlock all
doors.
-To unlock driver side door only, grasp driver side
handle.
-To unlock all doors, grasp any door handle except
rear doors.
-To unlock driver side door or hatch independently,
grasp the handle.
Refer to the Owner’s Manualfor more information
on this feature, and how to change modes.
Smart Key system cancel switch
NOTE:To conserve battery power, turn the Smart Key
system “OFF” when not using the vehicle for prolonged
periods of time. For more battery saving information,
refer to the
Owner’s Manual for more details.
ON
OFF Push

Page 8 of 32

6
BASIC HYBRID VEHICLE OPERATION
Panic button
Push and hold
Keyless entry
Locking operation
Unlocking operation
NOTE:After unlocking, if a door is not opened within
30 seconds, all doors will relock for safety.
Push
Push ONCE: Driver door
TWICE: All doors

Page 9 of 32

BASIC HYBRID VEHICLE OPERATION
7
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Insert key.*
Depress the brake pedal and push the “POWER”
button briefly and firmly.
The “READY” light will blink. After a few
seconds, when the light remains ON and a beep
sounds, you may begin driving.
Note:The brake pedal must be depressed to turn
the Hybrid System on.
* It is not necessary to insert the ignition key (key
fob) if Smart Key system is installed and activated.
Turning the Hybrid System ON
Changing operation modes
Pressing “POWER” without depressing the brake
pedal while the Hybrid System is OFF will change
the operation mode in succession from:
Start function
ACCESSORY
ON
OFF
Accessories such as the radio
will operate.
Ignition is on; Hybrid System is not
engaged.
All systems OFF.

Page 10 of 32

8
BASIC HYBRID VEHICLE OPERATION
Shifting
Park button
Shift lever
Brake pedal must be depressed when shifting to or
from the Park position. If brake is not applied, a
beep will sound and the vehicle cannot be shifted.
NOTE:The shift lever will always return to its
original position after shifting.ALWAYS CONFIRM
SHIFT POSITION BY CHECKING INDICATOR SYMBOLS
ON THE INSTRUMENT CLUSTER.
* The engine brake is the equivalent of downshifting.
Shift to “B” when engine braking is desired (i.e.
downhill driving, coasting to a stop, etc.).
Park button
Reverse(buzzer sounds)
Neutral
Drive
Engine brake
Shift position
*

Page:   1-10 11-20 21-30 31-40 40 next >