high beam TOYOTA PRIUS 2020 Owners Manual (in English)

3
1
9 8
7
6 4 3
2
PRIUS_OM_OM47D44U_(U)
5
3-4. Adjusting the steering wheel and mirrors
Steering wheel .................. 208
Inside rear view mirror....... 210
Outside rear view mirrors ............................. 212
3-5. Opening and closing the windows and moon roof
Power windows ................. 214
Moon roof .......................... 219
4-1. Before driving Driving the vehicle ............. 224
Cargo and luggage............ 235
Vehicle load limits ............. 238
Trailer towing..................... 239
Dinghy towing.................... 240
4-2. Driving procedures Power (ignition) switch ...... 241
EV drive mode................... 248
Hybrid transmission........... 251
Turn signal lever................ 257
Parking brake .................... 258
4-3. Operating the lights and wipers
Headlight switch ................ 259
Automatic High Beam ....... 264
Fog light switch ................. 269
Windshield wipers and washer ............................ 271
Rear window wiper and washer ............................ 277 4-4. Refueling
Opening the fuel tank cap................................... 279
4-5. Using the driving support systems
Toyota Safety Sense P ...... 284
PCS (Pre-Collision System) ........................... 292
LDA (Lane Departure Alert with steering
control) ............................ 304
Dynamic radar cruise control with full-speed
range ............................... 315
Cruise control .................... 331
Driving mode select switch .............................. 336
BSM (Blind Spot Monitor)......... 338
• The Blind Spot Monitor function.......................... 342
• The Rear Cross Traffic Alert function ................. 345
Intuitive parking assist ....... 350
Parking Support Brake function ............................ 361
S-APGS (Simple Advanced Parking
Guidance System) ........... 374
Driving assist systems ....... 408
4-6. Driving tips Hybrid vehicle driving tips ................................... 415
Winter driving tips .............. 418
4Driving

20Pictorial index
PRIUS_OM_OM47D44U_(U)
■Switches
Instrument cluster light control switch . . . . . . . . . . . . . . . . P. 100
S-APGS (Simple Advanced Parking Guidance System)
switch
*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 377
VSC OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 410
Automatic High Beam switch
*1 . . . . . . . . . . . . . . . . . . . . . . P. 264
“HUD” (Head-up display) switch
*1. . . . . . . . . . . . . . . . . . . . P. 156
Driving mode select switch . . . . . . . . . . . . . . . . . . . . . . . . . P. 336
EV drive mode switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 248
Seat heater switches
*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 4 45
Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 214
Outside rear view mirror switch . . . . . . . . . . . . . . . . . . . . . . P. 212
Door lock switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 183
Power window switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 214
1
2
3
4
5
6
7
8
9
10
11
12

110
PRIUS_OM_OM47D44U_(U)
2. Instrument cluster
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
IndicatorsPages
Turn signal indicator P. 257
Headlight indicator (U.S.A.) P. 259
Tail light indicator (Canada) P. 261
Parking brake indicator (U.S.A.) P. 258
Parking brake indicator (Canada)P. 258
Headlight high beam indicator P. 261
Fog light indicator (if equipped) P. 269
Security indicator P. 94
“READY” indicatorP. 241
Shift position indicatorsP. 251
*1, 2Slip indicator light P. 409
*1, 3VSC OFF indicatorP. 410
Cruise control indicatorP. 326,
331

PRIUS_OM_OM47D44U_(U)
1112. Instrument cluster
2
Instrument cluster
Dynamic radar cruise control indicator (if
equipped)P. 315
Cruise control “SET” indicatorP. 315,
331
AFS OFF indicator (if equipped) P. 261,
583
*1, 3PCS warning light (if equipped) P. 296
LDA indicator (if equipped)P. 308
Steering control indicator (if equipped)P. 309
Automatic High Beam indicator (if equipped) P. 264
Heated steering wheel indicator (if equipped) P. 445
“BSM” indicator (if equipped) P. 338
Intuitive parking assist indicator (if equipped) P. 350
*1, 3PKSB OFF indicator (if equipped)P. 363
*1S-APGS indicator (if equipped) P. 378
*1“AIR BAG ON/OFF” indicator (U.S.A.) P. 50
*1“AIR BAG ON/OFF” indicator (Canada)P. 50
IndicatorsPages

223
PRIUS_OM_OM47D44U_(U)
4Driving
4-1. Before drivingDriving the vehicle ............. 224
Cargo and luggage ........... 235
Vehicle load limits ............. 238
Trailer towing..................... 239
Dinghy towing ................... 240
4-2. Driving procedures Power (ignition) switch ...... 241
EV drive mode .................. 248
Hybrid transmission........... 251
Turn signal lever................ 257
Parking brake .................... 258
4-3. Operating the lights and wipers
Headlight switch ................ 259
Automatic High Beam ....... 264
Fog light switch ................. 269
Windshield wipers and washer ............................ 271
Rear window wiper and washer ............................ 277
4-4. Refueling Opening the fuel tank cap .................................. 279 4-5. Using the driving support
systems
Toyota Safety Sense P ..... 284
PCS (Pre-Collision System)........................... 292
LDA (Lane Departure Alert with steering
control) ............................ 304
Dynamic radar cruise control with full-speed
range............................... 315
Cruise control .................... 331
Driving mode select switch .............................. 336
BSM (Blind Spot Monitor) ........ 338
• The Blind Spot Monitor function ......................... 342
• The Rear Cross Traffic Alert function ................. 345
Intuitive parking assist....... 350
Parking Support Brake function ........................... 361
S-APGS (Simple Advanced Parking
Guidance System) .......... 374
Driving assist systems ...... 408
4-6. Driving tips Hybrid vehicle driving tips .................................. 415
Winter driving tips ............. 418

PRIUS_OM_OM47D44U_(U)
2614-3. Operating the lights and wipers
4
Driving
CanadaThe headlights, side
marker, parking, LED
accent (if equipped),
daytime running lights
( P. 262) and so on
turn on and off automat-
ically (when the power
switch is in ON mode).
The side marker, park-
ing, LED accent (if
equipped), tail, license
plate, instrument panel
lights, and daytime run-
ning lights ( P. 262)
turn on.
The headlights and all the lig hts listed above (except day-
time running lights) turn on.
The daytime running lights turn on. ( P. 262)
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with the headlights on or off.
AFS (Adaptive Front-lighting System) secures excellent visibili ty at
intersections and on curves by automatically adjusting the dire ction of
the light axis of the headlights according to vehicle speed and the
degree of the tire’s angle as controlled by steering input.
AFS operates at speeds of approximately 6 mph (10 km/h) or high er.
1
2
Turning on the high beam headlights
3
4
1
2
AFS (Adaptive Front-lighting System) (if equipped)

264
PRIUS_OM_OM47D44U_(U)
4-3. Operating the lights and wipers
Automatic High Beam
Push the lever away from you
with the headlight switch in the or position.
Press the Automatic High
Beam switch.
The Automatic High Beam indica-
tor will come on when the head-
lights are turned on automatically
to indicate that the system is
active.
: If equipped
The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetl ights, the lights of vehicles
ahead etc., and automatically turns the high beam on or off as
necessary.
WARNING
■ Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, ta king care to
observe your surroundings and turning the high beam on or off m anually if
necessary.
■ To prevent incorrect operation of the Automatic High Beam syste m
Do not overload the vehicle.
Activating the Automatic High Beam system
1
2

PRIUS_OM_OM47D44U_(U)
2654-3. Operating the lights and wipers
4
Driving
■Switching to low beam
Pull the lever to the original
position.
The Automatic High Beam indi-
cator will turn off.
Push the lever away from you to
activate the Automatic High
Beam system again.
■
Switching to high beam
Press the Automatic High
Beam switch.
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
Press the switch to activate the
Automatic High Beam system
again.
Turning the high beam on/off manually

266
PRIUS_OM_OM47D44U_(U)
4-3. Operating the lights and wipers
■High beam automatic turning on or off conditions
●When all of the following conditions are fulfilled, the high be am will be auto-
matically turned on (after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with headlights or tail lights turned on.
• There are few streetlights on the road ahead.
● If any of the following conditions are fulfilled, the high beam will be automat-
ically turned off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Vehicles ahead have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
■ Camera sensor detection information
●The high beam may not be automatically turned off in the following situa-
tions:
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another vehicle
• When vehicles ahead are hidden from sight due to repeated curv es, road
dividers or roadside trees
• When vehicles ahead appear from the faraway lane on wide road
• When vehicles ahead vehicles have no lights
● The high beam may be turned off if a vehicle ahead that is usin g fog lights
without using the headlights is detected.
● House lights, street lights, traffic signals, and illuminated billboards or signs
may cause the high beam to switch to the low beams, or the low beams to
remain on.
● The following factors may affect the amount of time taken to tu rn the high
beam on or off:
• The brightness of headlights, fog lights, and tail lights of v ehicles ahead
• The movement and direction of vehicles ahead
• When a vehicle ahead only has operational lights on one side
• When a vehicle ahead is a two-wheeled vehicle
• The condition of the road (gradient, curve, condition of the r oad surface
etc.)
• The number of passengers and amount of luggage
● The high beam may be turned on or off when the driver does not expect it.
● Bicycles or similar objects may not be detected.

PRIUS_OM_OM47D44U_(U)
2674-3. Operating the lights and wipers
4
Driving
●In the situations shown below, the system may not be able to accurately
detect surrounding brightness levels. This may cause the low be ams to
remain on or the high beams to cause problems for pedestrians, vehicles
ahead or other parties. In these cases, manually switch between the high
and low beams.
• In bad weather (rain, snow, fog, sandstorms etc.)
• The windshield is obscured by fog, mist, ice, dirt etc.
• The windshield is cracked or damaged.
• The camera sensor is deformed or dirty.
• The camera sensor temperature is extremely high.
• Surrounding brightness levels are equal to those of headlights , tail lights
or fog lights.
• Vehicles ahead have headlights that are either switched off, d irty, are
changing color, or are not aimed properly.
• When driving through an area of intermittently changing brightness and darkness.
• When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved
roads, gravel tracks etc.).
• When frequently and repeatedly taking curves or driving on a w inding
road.
• There is a highly reflective object ahead of the vehicle, such as a sign or
a mirror.
• The back of a vehicle ahead is highly reflective, such as a co ntainer on a
truck.
• The vehicle’s headlights are damaged or dirty.
• The vehicle is listing or tilting, due to a flat tire, a trailer being towed etc.
• The high beam and low beam are repeatedly being switched betwe en in
an abnormal manner.
• The driver believes that the high beam may be causing problems or dis-
tress to other drivers or pedestrians nearby.