display TOYOTA PRIUS C 2019 (in English) User Guide

25
The Pre-Collision System uses laser sensors and camera sensor to help de\
tect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt to
test the operation of the pre-collision system yourself, as the system m\
ay not operate
or engage, possibly leading to an accident. In some situations, such as \
when driving
in inclement weather such as heavy rain, fog, snow or a sandstorm or whi\
le driving on
a curve and for a few seconds after driving on a curve, a vehicle may no\
t be detected
by the laser and camera sensors, preventing the system from operating or\
engaging
properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Refer to the Toyota Owner’s Manual for additional information on PCS \
w/PD
operation, settings adjustments, limitations, and precautions before att\
empting to
use it.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a buzzer
will sound and a warning message will be displayed on the Multi-Informat\
ion Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional braking
force using Brake Assist. This system may prime the brakes and may apply\
greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the possibility
of a frontal collision with a preceding vehicle is extremely high, the s\
ystem may
automatically apply the brakes, reducing speed in order to help the driv\
er reduce the
impact and in certain cases avoid the collision.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Pre-Collision System with Pedestrian
Detection (PCS w/PD)
49125b_MY19_Prius_c_QRG_V2_ML_0713.indd 257/20/18 8:33 PM

27
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
DISABLING PRE-COLLISION SYSTEM (PCS)
To disable the system
Press the PCS switch for 3 seconds or more.
The
will turn on and a message will be displayed on the
Multi-Information Display (MID).
To enable the system
Press the PCS switch again. The system is enabled.
Note: PCS is enabled each time the engine switch is turned to Ignition O\
n.
The system can be disabled/enabled and the alert timing of the system ca\
n be
changed. (Alert timing only, brake operation remains the same).
Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD
operation, settings adjustments, limitations, and precautions before att\
empting to
use it.
Lane Departure Alert (LDA)
LDA in TSS-C uses an in-vehicle camera designed to detect visible white \
and yellow
lane markers in front of the vehicle and the vehicle’s position on th\
e road. If the system
determines that the vehicle is starting to unintentionally deviate from \
its lane, the system
alerts the driver with an audio and visual alert. When the alerts occur,\
the driver must
check the surrounding road situation and carefully operate the steering \
wheel to move
the vehicle back to the center part of their lane.
LDA is designed to function at speeds of approximately 32 MPH or higher \
on relatively
straight roadways.
49125b_MY19_Prius_c_QRG_V2_ML_0713.indd 277/20/18 8:33 PM

28
LANE DEPARTURE ALERT
The LDA function displays when the Multi-Information Display (MID) is \
switched to the
driving assist system information screen.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met aga\
in,
operation of the function is automatically restored. For example, LDA ma\
y not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it. The system displays solid white lines
on the LDA indicator when visible lane
markers on the road are detected. A
side flashes orange to alert the driver
when the vehicle deviates from its lane. The system displays outlines on the
LDA indicator when lane markers on the
road are not detected or the function is
temporarily cancelled.
TOYOTA SAFETY SENSE™
Lane Departure Alert (LDA) indicator flashes orange when operating. LDA function display
Lane markers
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
TURNING ON THE LDA SYSTEM
49125b_MY19_Prius_c_QRG_V2_ML_0713.indd 287/20/18 8:33 PM