TOYOTA PRIUS V 2012 Owners Manual (in English)

421
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
4
Maintenance and care
Replacing light bulbs
■ Headlight low beams (halogen headlights)
For the right side only: Remove
the bolt and unclip the engine
coolant reservoir hose. Then lift
up the air cleaner inlet duct.
After replacing, return the air
cleaner inlet duct to its original
position, and firmly install the stay
of the engine coolant reservoir
hose.
STEP 1

422 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
Turn the bulb base counterclock-
wise.
Unplug the connector while
pressing the lock release.
When installing, reverse the steps listed.STEP 2
STEP 3
STEP 4

423
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
4
Maintenance and care
■
Daytime running lights and headlight high beams
For the right side only: Remove the bolt and unclip the engine
coolant reservoir hose. Then lif t up the air cleaner inlet duct.
(  P. 421)
Turn the bulb base counterclockwise.
Vehicles with halogen headlights
Vehicles with LED headlights
Unplug the connector while
pressing the lock release.
When installing, reverse the steps listed.
STEP 1
STEP 2
STEP 3
STEP 4

424 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
■Parking lights
For the right side only: Remove the bolt and unclip the engine
coolant reservoir hose. Then lif t up the air cleaner inlet duct.
(  P. 421)
Turn the bulb base counterclockwise.
Vehicles with halogen headlights
Vehicles with LED headlights
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
STEP 3
STEP 4

425
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
4
Maintenance and care
■
Front side marker lights
For the right side only: Remove the bolt and unclip the engine
coolant reservoir hose. Then lif t up the air cleaner inlet duct.
(  P. 421)
Turn the bulb base counterclockwise.
Vehicles with halogen headlights
Vehicles with LED headlights
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
STEP 3
STEP 4

426 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
■Fog lights (if equipped)
Remove the engine under cover
bolts and pull down the engine
under cover.
Unplug the connector while
pressing the lock release.
STEP 1
STEP 2

427
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
4
Maintenance and care
Turn the bulb base counterclock-
wise.
When installing, reverse the steps listed.STEP 3
STEP 4

428 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
■Front turn signal lights
Remove the engine under cover bolt and clip and pull down
the engine under cover. ( P. 426)
Unplug the connector while
pressing the lock release.
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
ITO43P144
STEP 3
STEP 4

429
4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
4
Maintenance and care
■
Rear turn signal lights and back-up lights
Open the back door and remove
the cover.
To prevent damage, cover the tip
of the screwdriver with a rag.
Turn the bulb base counterclock-
wise.
Rear turn signal light
Back-up light
Remove the light bulb. Rear turn signal light
Back-up light
When installing, reverse the steps listed.
STEP 1
STEP 2
ITO43P147
STEP 3
STEP 4

430 4-3. Do-it-yourself maintenance
PRIUS v_U (OM47674U)
■License plate lights
Open the back door and remove
the cover.
To prevent damage, cover the tip
of the screwdriver with a rag.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.
STEP 1
STEP 2
ITO43P150
STEP 3
STEP 4