display TOYOTA SEQUOIA 2009 2.G Navigation Manual

ADVANCED FUNCTIONS
100
DISPLAYING MEMORY POINT NAMES
The name of a memory point that may be
displayed on the map can be set.
4U5031F
To show the name, touch “ON” on the
“Memory Point” screen. Not to show it,
touch “OFF”.
To change “Location”
1. Touch “Location” on the “Memory
Point” screen.
4U5032F
2. Touch the eight directional touch
screen button to move the cursor
to
the desired point on the map.
3. Touch “Enter”.
The previous screen will be displayed.

ADVANCED FUNCTIONS
101

To change “Phone #” (telephone
number)
1. Touch “Phone #” on the “Memory
Point” screen.
4U5033F
2. Enter the number using numeral
keys.
3. Touch “OK”.
The previous screen will be displayed. 1. Push the “MENU” button.
2. Touch “My Places”.
4U5034F
3. Touch “Delete”.
4U5035F
4. Touch the touchscreen button to
be deleted.
“Delete All”: To delete all memory points
in the system.
5. To delete the memory point, touch
“Yes”. To cancel the deletion, touch
“No”.
— Deleting memory points

ADVANCED FUNCTIONS
103
1. Push the “MENU” button.
2. Touch “My Places”.
4U5039F
3. Touch “Delete”.
4. To delete home, touch “Yes”. To
cancel the deletion, touch “No”.Areas you
want to avoid because of traffic
jams, construction work or other reasons
can be registered as areas to avoid.
1. Push the “MENU” button.
2. Touch “My Places”.
4U5040F
3. Touch “Register”.
4U5041F
4. Enter the location in the same way
as for a destination search, or display
the map of the area to be avoided. (See
“Destination search” on page 43.)
4U5042F
5. Touch the eight directional
touchscreen button to set the cursor
in the center of the area to avoid, and
touch “Enter”.
— Deleting home— Registering area to avoid

ADVANCED FUNCTIONS
104
4U5043F
6. Touch either or to
change the size of the area to be
avoided.
7. Touch “OK”.
INFORMATION
 If a destination is input in the area
to avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be
avoided may be shown.
 Up to 10 locations can be
registered as points/areas to
avoid. If there are 10 locations
already registered, the following
message will be displayed:
“Unable to register additional
points. Perform operation again
after deleting unnecessary
points.”.
The name, location and/or area size of a
registered area can be edited.
1. Push the “MENU” button.
2. Touch “My Places”.
4U5044F
3. Touch “Edit”.
4U5045F
4. Touch the desired area button.
— Editing area to avoid

ADVANCED FUNCTIONS
105
4U5046F
5. Touch the touchscreen button to
be edited.
“Name”: To edit the name of the area to
avoid. The names can be displayed on the
map. (See page 105.)
“Location”: To edit area location. (See
page 106.)
“Area Size”: To edit area size. (See page
107.)
“Active”: To turn on or off the area to avoid
feature. To turn on the feature touch “ON ”
on the “Edit Area to A void” screen. To turn
off the feature touch “OFF” on the “Edit
Area to Avoid” screen.
6. Touch “OK”.
To change “Name”
1. Touch “Name” on the “Edit Area to
Avoid” screen.
4U5047F
2. Enter the name using alphanumeric
keys.
Up to 24 letters can be entered.
3. Touch “OK”.
The previous screen will be displayed.

ADVANCED FUNCTIONS
106
DISPLAYING NAMES OF AREAS TO BE
AVOIDED
The name of an area to be avoided that
may be displayed on the map can be set.
4U5048F
To show the name, touch “ON” on the
“Edit Area to Avoid” screen. Not to
show it, touch “OFF”.
To change “Location”
1. Touch “Location” on the “Edit Area
to Avoid” screen.
4U5049F
2. Touch the eight directional touch
screen button to move the cursor
to
the desired point on the map.
3. Touch “Enter”.
The previous screen will be displayed.

ADVANCED FUNCTIONS
107

To change “Area Size”
1. Touch “Area Size” on the “Edit Area
to Avoid” screen.
4U5050F
2. Touch either or to
change the size of the area to be
avoided.
3. Touch “OK”.
The previous screen will be displayed. 1. Push the “MENU” button.
2. Touch “My Places”.
4U5051F
3. Touch “Delete” on the “My Places”
screen.
4U5052F
4. Touch the touchscreen button to
be deleted.
“Delete
All”: To delete all registered areas
to avoid in the system.
5. To delete the area, touch “Yes”. To
cancel the deletion, touch “No”.
— Deleting area to avoid

ADVANCED FUNCTIONS
108
The previous destination can be deleted.
1. Push the “MENU” button.
2. Touch “My Places”.
4U5053F
3. Touch “Delete Previous Points”.
4U5054F
4. Touch the touchscreen button you
want to delete.
“Delete All”: To delete all previous points
in the system.
4U5055F
5. To delete the point, touch “Yes”. To
cancel the deletion, touch “No”. Setting the items shown on the “Setup”
screen can be done. (See page 89.)
XS00301
1. Push the “MENU” button.
4U5056aF
2. Touch “Setup”.
4U5057F
3. Touch the items to be set.
4. Touch “OK”.
The previous screen will be displayed.
INFORMATION
To reset all setup items, touch “De-
fault”.
— Deleting previous pointsSetup

ADVANCED FUNCTIONS
11 0
INFORMATION
The displayed time to the destina-tion is the approximate driving
time that is calculated based on
the selected speeds and the actu-
al position along the guidance
route.
The time shown on the screen may vary greatly depending on prog-
ress along the route, which may
be affected by road conditions
such as traffic jams, and
construction work.
It is possible to display up to 99
hours 59 minutes.
Input key layout
Key layout can be changed.
1. Push the “MENU” button.
2. Touch “Setup” on the “Menu”
screen.
4U5061F
3. Touch “ABC” or “QWE” of
“Keyboard Layout” to choose the Input
key layout.

ADVANCED FUNCTIONS
111
LAYOUT TYPE
4U5062F
“ABC” type
4U5063F
“QWE” type
The selected button is highlighted.
4. Touch “OK”.
Time zone
Time zone can be changed.
1. Push the “MENU” button.
2. Touch “Setup” on the “Menu”
screen.
4U5064F
3. Touch “Change” of “Time Zone”.
The “Adjust Time Zone” s creen will be dis-
played on the display.
4U5065F
4. Touch the desired time zone.
The selected button is highlighted.
“Daylight Saving Time”: Daylight saving
time can be set or cancelled.
To set daylight saving time, touch “ON”,
and to cancel it, touch “OFF” .
5. Touch “OK”.