TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual

08 SIENNA_U (L/O 0801)
323
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Set PassKey
The passkey can be c hanged. A 4 to 8
digit code can be input as a pa sskey.
Delete
The registered phones can be deleted.
To enter the phone setup menu 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Setup” is displayed and push the
knob.
“Setup. Please push the talk switch and
say security, or phone setup.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Phone Setup” is displayed and push
the knob.
“Phone setup. Push the talk switch and
say pair phone, select phone, change
name, list phones, set pa sskey or delete.”
is heard.
“XXX (phone name) already selected.” is
heard and “XXX (phone name)” is dis-
played.
If no phone has been registered, the sys-
tem may not function properly. To pair phones
1. Push the talk switch and say “Pair phone”, or turn the “AUDIO CONTROL”
knob until “Pair Phone” is displayed
and push the knob.
“Pair. Push the talk switch and say a
name for the phone.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (desired phone
name)”.
“Push the talk switch and say confirm.
Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“XXX Ready for phone pairing. Please use
the phone to connect it to the hands −free
system. The passkey for the p hone is....”
is heard.
After “HANDS FREE” is displayed, a pass-
key
∗ is displayed and “Searching.” is
heard.
4. Input the displayed passkey into the phone. “The phone is paired and ready for use.
Returning to the main menu.” is heard and
“Paired” is displayed.
The system may not function in the follow-
ing cases:
If 6 phones have already been regis-
tered.
If the vehicle is moving.
If the system cannot communicate with
the phone.
∗: Passkey is a password r
equired to reg-
ister a phone to the system.
INFORMATION
To use the handsfree system, you
need to register your phone in the
system. Once you have registered
it, you can make a handsfree call.
Up to 6 phones can be registered.
For the operation of the phone, see
the manual that comes with your
cellular phone.
The passkey can be changed. See
page 326 for changing the passkey.

08 SIENNA_U (L/O 0801)
324
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To select a phone1. Push the talk switch and say “Select phone”, or turn the “AUDIO CONTROL”
knob until “Select Phone” is displayed
and push the knob.
“Select phone. Push the talk switch and
say the phone name or say list phones.”
is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the desired phone name is displayed
and push the knob.
When the phone is selected by a voice
command:
“XXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until “Con-
firm” is displayed and push the knob.
“XXX selected. Returning to the phone
setup.” is heard. When the phone is selected by using
the knob:
“XXX selected. Returning to the phone
setup.” is heard.
The system may not function in the follow-
ing cases:
If the phone is not found.
If the system does not recognize the
voice command.
To change a name
1. Push the talk switch and say “Change name”, or turn the “AUDIO CONTROL”
knob until “Change Name” is displayed
and push the knob.
“Change name. Push the talk switch and
say the phone name to change.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the phone name that you want to
change is displayed and push the
knob.

08 SIENNA_U (L/O 0801)
325
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
When the phone is selected by a voice
command:
“XXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXX” is displayed.1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Push the talk switch and say a new
name.” is heard.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (desired phone
name)”.
“XXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
setup.” is heard and “Changed” is dis-
played. When the phone is selected by using
the knob:
“XXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXX” is displayed.
1. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Push the talk switch and say a new
name.” is heard.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Record Name” is displayed, push the
knob and say “XXX (desired phone
name)”.
“XXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Name changed. Returning to the phone
setup.” is heard and “Changed” is dis-
played. The system may not function in the follow-
ing cases:
If no phone has been registered.
If the system does not recognize the
voice command.
To list phones 1. Push the talk switch and say “List phones”, or turn the “AUDIO
CONTROL” knob until “List Phones” is
displayed and push the knob.
“List phones. To select a name, push the
talk switch during the name playback.” is
heard. 2. Follow voice guidance instructions.
“Push the talk switch and say select
phone, change name, or delete.” is heard.
Select one of the following:

08 SIENNA_U (L/O 0801)
326
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Select phone
Push the talk switch and say “Select
phone”, or turn the “AUDIO CONTROL”
knob until “Select Phone” is displayed and
push the knob.
For further details on selecting a phone,
see page 324.
Change name
Push the talk switch and say “Change
name”, or turn the “AUDIO CONTROL”
knob until “Change Name” is displayed
and push the knob.
For further details on changing a name,
see page 324.
Delete
Push the talk switch and say “Delete”, or
turn the “AUDIO CONTROL” knob until
“Delete” is displayed and push the knob.
For further details on deleting a phone,
see page 327.
If no phone has been registered, the sys-
tem may not function properly.To set a passkey
1. Push the talk switch and say “Set passkey”, or turn the “AUDIO
CONTROL” knob until “Set Passkey” is
displayed and push the knob.
“Set Passkey. The passkey is r equired for
the phone pairing process. Push the talk
switch and say a new passkey.” is heard
and passkey is displayed.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob to
select a number.
When using a voice command:
“XXXX (new pa sskey) Push the talk switch
and say confirm. Otherwise, continue add-
ing numbers, or say go back or delete.”
is heard and “XXXX (new pa sskey)” is
displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the knob.
“Passkey ch anged. Returning to the phone
setup.” is heard. When using the knob:
1. Turn the “AUDIO CONTROL” knob to select a number. Push the “AUDIO
CONTROL” knob to set.
2. When the passkey is set, push the “AUDIO CONTROL” knob.
“Passkey c hanged. Returning to the phone
setup.” is heard.
The system does not function in the fol-
lowing cases:
If the passkey has less than 4 digits.
If the passkey has more than 8 digits.

08 SIENNA_U (L/O 0801)
327
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To delete a phone1. Push the talk switch and say “Delete”, or turn the “AUDIO CONTROL” knob
until “Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say the
phone name to delete.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
the phone name you want to delete is
displayed and push the knob.
When using a voice command:
“XXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until “Con-
firm” is displayed and push the knob.
“Deleted. Returning to the phone setup.”
is heard and “Deleted” is displayed.
When using the knob:
“Deleted. Returning to the phone setup.”
is heard and “Deleted” is displayed. The system may not function in the follow-
ing cases:
If no phone has been registered.
If the system does not recognize the
voice command.
The security menu includes the following:
Set PIN (Personal Identification Num-
ber)
The PIN can be set or changed.
Phone book lock
The phone book can be locked.
When the phone book is locked, the fol-
lowing functions cannot be used:
Dial by name
Redial
Callback
Speed Dial
PhoneBook
Phone book unlock
The locked phone book can be unlocked.
—Security

08 SIENNA_U (L/O 0801)
328
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To enter the security menu1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Setup” is displayed and push the
knob.
“Setup. Please push the talk switch and
say security, or phone setup.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Security” is displayed and push the
knob.
“Security. Push the talk switch and say
set PIN, phone book lock, or phone book
unlock.” is heard. To set a PIN
Push the talk switch and say “Set PIN”,
or turn the “AUDIO CONTROL” knob until
“Set PIN” is displayed and push the knob.
“There is no PIN number set. Please reg-
ister a PIN number. Please push the talk
switch and say a four
−digit PIN number.”
is heard. When using a voice command:
1. Push the talk switch and say “XXX (new PIN number)”.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“The PIN number has been set. Returning
to the security.” is heard and “Completed”
is displayed.
When using the knob: 1. Turn the “AUDIO CONTROL” knob to select a number. Push the “AUDIO
CONTROL” knob to set.
2. Repeat the above procedure until the entire four −digit number is set.
3. When the PIN is set, push the “AUDIO CONTROL” knob.
4. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“The PIN number has been set. Returning
to the security.” is heard and “Completed”
is displayed.

08 SIENNA_U (L/O 0801)
329
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
If the PIN is to be changed:
“There is a PIN number in place. Push
the talk switch and say the correct PIN
number.” is heard and “Current PIN?” is
displayed.1. Follow voice guidance instructions, or use the “AUDIO CONTROL” knob to
input the current PIN number.
“Please push the talk switch and say a
four −digit PIN number.” is heard.
2. Push the talk switch and say “XXXX (new PIN number)”.
“The PIN number has been set. Returning
to the security.” is heard and “Completed”
is displayed.
If the current number is not correct, the
system does not function properly. To lock the phone book
1. Push the talk switch and say “Phone book lock”, or turn the “AUDIO
CONTROL” knob until “Phbk Lock” is
displayed and push the knob.
“There is a PIN number in place. Push
the talk switch and say the correct PIN
number.” is heard and “Current PIN?” is
displayed. 2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob to
select a number. When using a voice command:
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the knob.
“PIN number accepted. The phone book is
now locked. Returning to the main menu.”
is heard and “Locked” is displayed.
When using the knob:
1. Turn the “AUDIO CONTROL” knob to select a number. Push the “AUDIO
CONTROL” knob to set.
2. When the PIN number is set, push the “AUDIO CONTROL” knob.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“PIN number accepted. The phone book is
now locked. Returning to the main menu.”
is heard and “Locked” is displayed.

08 SIENNA_U (L/O 0801)
330
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
The system may not function in the follow-
ing cases:
If the current number is not correct.
If the phone book has already been
locked.
If the PIN number does not exist.
To unlock the phone book
1. Push the talk switch and say “Phone book unlock”, or turn the “AUDIO
CONTROL” knob until “Phbk Unlock” is
displayed and push the knob.
“Phonebook unlock. There is a PIN num-
ber in place. Push the talk switch and say
the correct PIN number.” is heard and
“Current PIN?” is displayed.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob to
select a number. When using a voice command:
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the knob.
“PIN number accepted. The phone book is
now unlocked. Returning to the main
menu.” is heard and “Unlocked” is dis-
played.
When using the knob:
1. Turn the “AUDIO CONTROL” knob to select a number. Push the “AUDIO
CONTROL” knob to set.
2. When the PIN number is set, push the “AUDIO CONTROL” knob.
“XXXX Push the talk switch and say con-
firm. Otherwise, say go back.” is heard
and “XXXX” is displayed. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“PIN number accepted. The phone book is
now unlocked. Returning to the main
menu.” is heard and “Unlocked” is dis-
played. The system may not function in the follow-
ing cases:
If the current number is not correct.
If the phone book has already been
unlocked.
INFORMATION
A shortcut to each of the following
functions is available. Enter the
phone book menu, push the offhook
switch, and say either of the follow-
ing:
Phone book lock
Phone book unlock

08 SIENNA_U (L/O 0801)
331
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
The system setup menu includes the fol-
lowing:
Adjust Guidance Volume
Initialize
To enter the system setup menu
1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Setup” is displayed and push the
knob.
3. Turn the “AUDIO CONTROL” knob until “System Setup” is displayed and push
the knob.
“System setup. Please select guidance
volume or initialize.” is heard.
To adjust the guidance volume 1. Turn the “AUDIO CONTROL” knob until “Guidance Vol” is displayed and push
the knob.
“Guidance will be at this volume” is heard
and the present volume level is displayed.
2. Turn the “AUDIO CONTROL” knob to adjust the volume and push the knob. To initialize
1. Turn the “AUDIO CONTROL” knob until “Initialize” is displayed and push the
knob.
“System initialization. This will erase all
user information in the hands free system;
including paired phones, phone book en-
tries, and call history. Select confirm to
initialize. Otherwise, select go back.” is
heard. 2. Turn the “AUDIO CONTROL” knob until “Confirm” is displayed and push the
knob.
“System initialization. This will erase all
user information in the hands free system;
including paired phones, phone book en-
tries, and call history. Select confirm to
initialize. Otherwise, select go back.” is
heard. 3. Turn the “AUDIO CONTROL” knob until “Confirm” is displayed and push the
knob.
“Initialized. Returning to the main menu.”
is heard. The phone book menu includes the follow-
ing:
Add Entry
Phone numbers and voice tags can be
registered.
Change Name
The registered names can be changed.
Delete Entry
The registered names can be deleted.
Delete Speed Dial
The registered speed dial can be deleted.
List Names
The registered names can be checked.
Set Speed Dial
Speed dials can be set.
—System Setup —Phone Book

08 SIENNA_U (L/O 0801)
332
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To enter the phone book menu1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Phonebook” is displayed and push the
knob.
“Phone book. Please push the talk switch
and say add entry, change name, delete
entry, list names, set speed dial or delete
speed dial.” is heard.
If the phone book is locked, the system
may not function properly. To add entry
The add entry includes the following:
(a) By Voice
(b) By Phone
(c) Call History
(d) Manual Input
Push the talk switch and say “Add entry”,
or turn the “AUDIO CONTROL” knob until
“Add Entry” is displayed and push the
knob.
“Add Entry. How will the number be en-
tered. Push the talk switch and say by
voice, by phone, or call history.” is heard.(a) By voice
1. Push the talk switch and say “By voice”, or turn the “AUDIO CONTROL”
knob until “By Voice” is displayed and
push the knob.
“Voice entry. Push the talk switch and say
the number.” is heard. 2. Push the talk switch and say the dial number that you want to register.
“To store, push the talk switch and say
confirm. Otherwise, continue adding num-
bers, or say go back, or delete.” is heard
and number is displayed.
3. Follow voice guidance instructions.