display TOYOTA TUNDRA 2008 2.G Navigation Manual

ADVANCED FUNCTIONS
922008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
4U5024aG
2. Touch “My Places”.
4U5033G
On this screen, the following operations can
be performed.
1Registers memory points. (See “ —
Registering memory points” on page
92.)
2Edits memory points. (See “ — Editing
memory points” on page 93.)
3Deletes memory points. (See “ —
Deleting memory points” on page 97.)
4Registers or deletes home. (See “ —
Registering home” on page 98 or “ —
Deleting home” on page 98.)
5Registers areas to avoid. (See “ —
Registering area to avoid” on page 99.)
6Edits areas to avoid. (See “ — Editing
area to avoid” on page 100.)
7Deletes areas to avoid. (See “ —
Deleting area to avoid” on page 102.)
8Deletes previous points. (See “ —
Deleting previous points” on page 103.)
9Number of remaining memory points
10Number of remaining areas to avoid
— Registering memory points
1. Push the “MENU” button.
2. Touch “My Places”.
4U5034G
3. Touch “Register”.
4U5035bG
4. Enter the location in the same way as
for a destination search. (See “Destination
search” on page 41.)
After memory point registration is completed,
the “Memory Point” screen will be displayed.

ADVANCED FUNCTIONS
932008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
4U5036aG
5. Touch “OK”.
To edit registered information, see “ — Editing
memory points” on page 93.
INFORMATION
Up to 106 memory points can be regis-
tered.
— Editing memory points
The icon, attribute, name, location and/or
telephone number of a registered memory
point can be edited.
1. Push the “MENU” button.
2. Touch “My Places”.
4U5037G
3. Touch “Edit”.
4U5038G
4. Touch the desired memory point but-
ton.
4U5036aG
5. Touch the touchscreen button to be
edited.
“Icon”: To select icons to be displayed on the
map. (See page 94.)
“Quick Access”: To set an attribute.
Memory points with a set attribute can be
used as a “Quick access” or “Home” button.
(See page 95.)
“Name”: To edit memory point names. The
names can be displayed on the map. (See
page 96.)
“Location”: To edit location information.
(See page 96.)
“Phone #”: To edit telephone numbers. (See
page 97.)
6. Touch “OK”.

ADVANCED FUNCTIONS
962008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
To change “Name”
1. Touch “Name” on the “Memory Point”
screen.
4U5046G
2. Enter the name using the alphanumeric
keys.
Up to 24 letters can be entered.
3. Touch “OK”.
The previous screen will be displayed.DISPLAYING MEMORY POINT NAMES
The name of a memory point that may be dis-
played on the map can be set.
4U5044G
To show the name, touch “ON” on the
“Memory Point” screen. Not to show it,
touch “OFF”.
To change “Location”
1. Touch “Location” on the “Memory
Point” screen.
4U5047G
2. Touch the eight directional touch
screen button to move the cursor to the
desired point on the map.
3. Touch “Enter”.
The previous screen will be displayed.

ADVANCED FUNCTIONS
972008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
To change “Phone #” (telephone num-
ber)
1. Touch “Phone #” on the “Memory
Point” screen.
4U5048G
2. Enter the number using numeral keys.
3. Touch “OK”.
The previous screen will be displayed.
— Deleting memory points
1. Push the “MENU” button.
2. Touch “My Places”.
4U5049G
3. Touch “Delete”.
4U5050G
4. Touch the touchscreen button to be
deleted.
“Delete All”: To delete all memory points in
the system.
5. To delete the memory point, touch
“Yes”. To cancel the deletion, touch “No”.

ADVANCED FUNCTIONS
982008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
— Registering home
If home has been registered, that information
can be recalled by using the “Home” touch−
screen button on the “Destination” screen.
(See “ — Destination search by Home” on
page 44.)
1. Push the “MENU” button.
2. Touch “My Places”.
4U5051G
3. Touch “Register”.
4U5052bG
4. Enter the location in the same way as
for a destination search. (See “Destination
search” on page 41.)
When registration of home is completed, the
“Memory Point” screen will be displayed.
4U5053G
5. Touch “OK”.
To edit registered information, see “ — Editing
memory points” on page 93.
— Deleting home
1. Push the “MENU” button.
2. Touch “My Places”.
4U5054G
3. Touch “Delete”.
4. To delete home, touch “Yes”. To cancel
the deletion, touch “No”.

ADVANCED FUNCTIONS
992008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
— Registering area to avoid
Areas you want to avoid because of traffic
jams, construction work or other reasons can
be registered as areas to avoid.
1. Push the “MENU” button.
2. Touch “My Places”.
4U5055G
3. Touch “Register”.
4U5056aG
4. Enter the location in the same way as
for a destination search, or display the
map of the area to be avoided. (See
“Destination search” on page 41.)
4U5057G
5. Touch the eight directional
touchscreen button to set the cursor
in the center of the area to avoid, and touch
“Enter”.
4U5058G
6. Touch either or to change
the size of the area to be avoided.
7. Touch “OK”.

ADVANCED FUNCTIONS
1002008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
INFORMATION
If a destination is input in the area to
avoid or the route calculation cannot
be made without running through the
area to avoid, a route passing through
the area to be avoided may be shown.
Up to 10 locations can be registered
as points/areas to avoid. If there are
10 locations already registered, the
following message will be displayed:
“Unable to register additional points.
Perform operation again after
deleting unnecessary points.”.
— Editing area to avoid
The name, location and/or area size of a reg-
istered area can be edited.
1. Push the “MENU” button.
2. Touch “My Places”.
4U5059G
3. Touch “Edit”.
4U5060G
4. Touch the desired area button.
4U5061G
5. Touch the touchscreen button to be
edited.
“Name”: To edit the name of the area to
avoid. The names can be displayed on the
map. (See page 101.)
“Location”: To edit area location. (See page
101.)
“Area Size”: To edit area size. (See page
102.)
“Active”: To turn on or off the area to avoid
feature. To turn on the feature touch “ON” on
the “Edit Area to Avoid” screen. To turn off the
feature touch “OFF” on the “Edit Area to
Avoid” screen.
6. Touch “OK”.

ADVANCED FUNCTIONS
1012008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
To change “Name”
1. Touch “Name” on the “Edit Area to
Avoid” screen.
4U5106G
2. Enter the name using alphanumeric
keys.
Up to 24 letters can be entered.
3. Touch “OK”.
The previous screen will be displayed.DISPLAYING NAMES OF AREAS TO BE
AVOIDED
The name of an area to be avoided that may
be displayed on the map can be set.
4U5062G
To show the name, touch “ON” on the
“Edit Area to Avoid” screen. To not show
it, touch “OFF”.
To change “Location”
1. Touch “Location” on the “Edit Area to
Avoid” screen.
4U5063G
2. Touch the eight directional touch
screen button to move the cursor to the
desired point on the map.
3. Touch “Enter”.
The previous screen will be displayed.

ADVANCED FUNCTIONS
1022008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
To change “Area Size”
1. Touch “Area Size” on the “Edit Area to
Avoid” screen.
4U5064G
2. Touch either or to change
the size of the area to be avoided.
3. Touch “OK”.
The previous screen will be displayed.
— Deleting area to avoid
1. Push the “MENU” button.
2. Touch “My Places”.
4U5065G
3. Touch “Delete” on the “My Places”
screen.
4U5103G
4. Touch the touchscreen button to be
deleted.
“Delete All”: To delete all registered areas to
avoid in the system.
5. To delete the area, touch “Yes”. To can-
cel the deletion, touch “No”.

ADVANCED FUNCTIONS
1042008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
4U5087G
3. Touch the items to be set.
4. Touch “OK”.
The previous screen will be displayed.
INFORMATION
To reset all setup items, touch “Default”.
Distance unit
Distance unit can be changed.
1. Push the “MENU” button.
2. Touch “Setup” on the “Menu” screen.
4U5090G
3. Touch “km” or “miles” of “Distance” to
choose the distance unit.
The selected button is highlighted.
4. Touch “OK”.
INFORMATION
This function is available only in English
or Spanish. To switch language, see
“Select language” on page 172.
Estimated travel time
The speed that is used for the calculation of
the estimated travel time and the estimated
arrival time can be set.
1. Push the “MENU” button.
2. Touch “Setup” on the “Menu” screen.
4U5091G
3. Touch “Set Speed” of the “Estimated
Travel Time”.