key TOYOTA TUNDRA 2010 2.G Owner's Guide
Page 371 of 724
371
3-3. Using the Bluetooth® audio system
3
Interior and exterior features
Setting up a Bluetooth® enabled por table player
Registering a portable playerSelect “Pair Audio Player” using a voice command or  , and
perform the procedure for registering a portable player. ( P. 366)
Registering a portable  player in the Bluetooth® audio system allows
the system to function. The following  functions can be used for reg-
istered portable players:
■ Functions and operation procedures
Press   until “BT AUDIO” is displayed.
Press   that corresponds to “SETUP”.
Select one of the following functions using a voice com-
mand or  .
● Registering a portable player 
“Pair Audio Player”
● Selecting a portable player to be used 
“Select Audio Player”
● Changing the registered name 
“Change Name”
● Listing the registered portable players 
“List Audio Players”
● Changing the passkey 
“Set Passkey”
● Deleting a registered portable player 
“Delete Audio Player (Delete Audio)” 
Page 374 of 724
374 3-3. Using the Bluetooth® audio system
Changing the passkeySelect “Set Passkey” using a voice command or  .
Press the talk switch, say a 4 to 8-digit number, and select
“Confirm” using a voice command or  .
When the entire number to be registered as a passkey has
been input, press   again.
If the number to be registered has 8 digits, pressing of the knob is
not necessary.
Deleting a registered portable playerSelect “Delete Audio Player (Delete Audio)” using a voice
command or  .
Select the portable player to be  deleted by either of the follow-
ing methods and select “Confirm” using a voice command or
:
a. Press the talk switch and say the name of the desired por- table player.
b. Press the talk switch and  say “List Audio Players”. When
the name of the desired portable  player is read aloud, press
the talk switch.
If the portable player to be deleted is paired as a Bluetooth
® phone,
the registration of the mobile phone can be deleted at the same time.
A voice guidance instruction to delete a mobile phone is heard.
Select “Confirm” by using a voice command or  . 
Page 414 of 724
414 3-5. Using the hands-free phone system (for cellular phone)
TitlePage
Using the hands-free phone system ■ Operating the system by using a voice 
command
■ Using the hands-free system for the 
first time
■ Menu list of the hands-free phone sys-
tem P. 417
Making a phone call ■ Dialing by inputting a number
■ Dialing by inputting a name
■ Speed dialing
■ When receiving a phone call
■ Transferring a call
■ Using the call history memory P. 425
Setting a cellular phone ■ Registering a cellular phone
■ Selecting the cellular phone to be used
■ Changing a registered name
■ Listing the registered cellular phone
■ Changing the passkey
■ Turning the hands-free phone auto-
matic connection on/off P. 429
Security and system setup ■ Setting or changing the PIN
■ Locking or unlocking the phone book
■ Setting voice guidance volume
■ Initialization P. 433
Using the phone book ■ Adding a new phone number
■ Setting speed dials
■ Changing a registered names
■ Deleting registered data
■ Deleting speed dials
■ Listing the registered data P. 436 
Page 420 of 724
420 3-5. Using the hands-free phone system (for cellular phone)
Register a phone name by either of the following methods.
a. Select “Record Name” by using  , and say a name to
be registered.
b. Press the talk switch and say a name to be registered.
A voice guidance instruction to confirm the input is heard.
Select “Confirm” by using a voice command or  .
Registration to the hands-free phone system only
Select “Phone Only” using a voice command or  .
Registration to the hands-free phone system and Bluetooth
® audio
system at the same time
Select “Internal Audio (Int. Audio)” using a voice command or
.
Select “Confirm” by using a voice command or  .
A passkey is displayed and heard, and a voice guidance instruction
for inputting the passkey into the cellular phone is heard. Input the passkey into the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-
ation of the phone.
Guidance for registration completion is heard. 
Page 422 of 724
422 3-5. Using the hands-free phone system (for cellular phone)
“Setup”“Security”
“Set PIN” Setting a PIN code
“Phone-
book Lock”
Locking the phone book
“Phone-
book 
Unlock” Unlocking the phone book
“Phone 
Setup” “Pair 
Phone”
Registering the cellular phone 
to be used
“Change 
Name” Changing a registered name of 
a cellular phone
“Delete 
Phone” Deleting a registered cellular 
phone
“List 
phones” Listing the registered cellular 
phones
“Select 
phone” Selecting a cellular phone to be 
used
“Set Pass-
key” Changing the passkey
“Hands-free 
power” Setting the hands-free power 
on/off
“System 
Setup” “Guidance 
Vo l u m e ”
Setting voice guidance volume
“Device 
Name” Displaying device information
“Initialize” Initialization
First menuSecond  menuThird menuOperation detail 
Page 423 of 724
423
3-5. Using the hand
s-free phone system  (for cellular phone)
3
Interior and exterior features
■Using a short cut key
First menuSecond menuOperation detail
“Dial XXX (name)” - Dialing a number registered 
in the phone book
“Dial XXX (number)” - Dialing the input numbers
“Phone book add 
entry” - Adding a new number
“Phone book 
change name” -Changing the name of a 
phone number in the phone 
book
“Phone book delete 
entry” - Deleting phone book data
“Phone book set 
speed dial” - Registering a speed dial
“Phone book delete 
speed dial” - Deleting a speed dial
“Phonebook” “Phonebook Unlock” Unlocking the phone book
“Phonebook Lock” Locking the phone book 
Page 424 of 724
424 3-5. Using the hands-free phone system (for cellular phone)
■Automatic volume adjustment
When vehicle speed is 50 mph (80 km/h) or more, the volume automatically
increases. The volume returns to the previous volume setting when vehicle
speed drops to 43 mph (70 km/h) or less.
■ When using a voice command
For numbers, say a combination of single digits from zero to nine, # (pound), 
 (star), and + (plus).
Say a command correctly and clearly.
■ The system may not recognize your voice in the following situations:
●When driving on a rough road
● When driving at high speeds
● When air is blowing out of the vents onto the microphone
● When the air conditioning fan emits a loud noise
■ Operations that cannot be  performed while driving
● Operating the system with 
● Registering a cellular phone to the system
■ Changing the passkey
P. 432 
Page 429 of 724
429
3-5. Using the hands-free phone system (for cellular phone)
3
Interior and exterior features
Setting a cellular phone
Registering a cellular phoneSelect “Pair Phone” by using a voice command or  , and do the
procedure for registering a cellular phone. ( P. 419)
Registering a cellular phone in  the hands-free phone system allows
the system to function. The following  functions can be used for reg-
istered cellular phones:
■ Functions and operation procedures
To enter the menu for each function, follow the steps below by
using a voice command or  :
●Registering a cellular phone 
1. “Setup”   2. “Phone Setup”   3. “Pair Phone”
● Selecting the cellular phone to be used 
1. “Setup”   2. “Phone Setup”   3. “Select Phone”
● Changing a registered name 
1. “Setup”   2. “Phone Setup”   3. “Change Name”
● Listing the registered cellular phones 
1. “Setup”   2. “Phone Setup”   3. “List Phones”
● Deleting a cellular phone 
1. “Setup”   2. “Phone Setup”   3. “Delete Phone”
● Changing the passkey 
1. “Setup”   2. “Phone Setup”   3. “Set Passkey”
● Turning the hands-free phone  automatic connection on/off
1. “Setup”   2. “Phone Setup”   3. “Hands-free power” 
Page 432 of 724
432 3-5. Using the hands-free phone system (for cellular phone)
Changing the passkey
Select “Set Passkey” by using a voice command or  .
Press the talk switch, say a 4 to 8-digit number, and select
“Confirm” by using a voice command or  .
The number should be input 1 digit at a time.
When the entire number to be registered as a passkey has
been input, press   again.
Turning the hands-free phone  automatic connection on/off
■ Turning off the automatic connection
Select “Handsfree Power” by using a voice command or
.
Select “Turn off” by using a voice command or  .
■ Turning on the automatic connection
Select “Handsfree Power” by using a voice command or
.
Select “Turn on” by using a voice command or  .
■ The number of cellular phon es that can be registered
Up to 6 cellular phones can be registered in the system. 
Page 449 of 724
449
3-7. Using the 
storage features
3
Interior and exterior features
Glove boxes
Upper glove box Press the button.
Lower glove box Unlock with the master key
Lock with the master key
Pull the lever up.
Glove boxes