TOYOTA TUNDRA 2018 (in English) Owner's Guide
Page 31 of 56
29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
% J T Q M B Z . * %
U P V S H F U I F E S J W F S U P U B L F F W B T J W F B D U J P O
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)
Page 32 of 56
30
TOYOTA SAFETY SENSE™
CHANGING THE PCS SENSITIVITY
FarMiddle
(default) Near
1 S F T T i” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select “PCS” and then press “”.
1 S F T T i
” switches and select “Sensitivity” and then press “” to select the
desired setting.
1 S F T T i
” to go back to the menu. Also, use “” to switch menus or display
top screen.
Note: PCS is enabled each time the engine switch is turned to Ignition O\
n.
The system can be disabled/enabled and the alert timing of the system ca\
n be
changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide an
alert and then automatic braking if needed.In certain conditions, the PCS system included with the TSS-P package ma\
y also
help to detect a pedestrian in front of your vehicle. With Toyota Safety\
Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave ra\
dar to
help detect a pedestrian in front of your vehicle in certain conditions.\
The in-vehicle
camera of PCS detects a potential pedestrian based on size, profile, and\
motion of
the detected pedestrian. However, a pedestrian may not be detected depen\
ding
on the conditions, including the surrounding brightness and the motion, \
posture,
size, and angle of the potential detected pedestrian, preventing the sys\
tem from
operating or engaging.
Refer to a Toyota Owner’s Manual for additional information.
PEDESTRIAN DETECTION FUNCTION
Page 33 of 56
31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
% * 4 " # - * / ( 5 ) & 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
1 S F T T i” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select “PCS” from the MID and then press “”.
1 S F T T i
” switches and select “PCS” and then press “” to select the desired
setting ON/OFF.
1 S F T T i
” to go back to the menu. Also, use “” to switch menus or display
top screen.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
Lane Departure Alert (LDA)
The Lane Departure Alert system recognizes visible white or yellow lane \
markers via
a camera sensor under certain circumstances. The system alerts the drive\
r with a
X B S O J O H C V [ [ F S T P V O E B O E N F T T B H F J O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
X I F O J U
detects the vehicle deviating from or swaying multiple times within its \
lane.
Page 34 of 56
32
TOYOTA SAFETY SENSE™
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
LDA FUNCTIONS
LDA function display
Lane
(2)
(1)
- B O F % F Q B S U V S F " M F S U - % "
J O E J D B U P S T J M M V N J O B U J P O T I P X T U I F T Z T U F N P Q F S B U J P O
status.
Page 35 of 56
33
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
ADJUSTING THE LDA ALERT SENSITIVITY
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - % " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1 S F T T i 4 & 5 6 1 w P S i " 1 1 4 w T X J U D I F T P O U I F N V M U J N F E J B T Z T U F N
If you have Entune AudIo Plus, select “Setup” on the “Apps” \
screen.
4 F M F D U i 7 F I J D M F w P O U I F i 4 F U V Q w T D S F F O
4 F M F D U i 7 F I J D M F $ V T U P N J [ B U J P O w P O U I F i 7 F I J D M F 4 F U U J O H T w T D S F F O
$ I P P T F B D B U F H P S Z U P E J T Q M B Z U I F T F U U J O H T
4 F M F D U U I F T F U U J O H U P C F D I B O H F E
4 F M F D U i w P S i w U P D I P P T F U I F E F T J S F E M F W F M
U I F O T F M F D U i 0 , w
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
- % " ' 6 / $ 5 * 0 / 4 $ 0 / 5 * / 6 & %
5 I F - % " G V O D U J P O E J T Q M B Z T X I F O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
J T T X J U D I F E U P
the driving assist system information screen.
5 I F T Z T U F N E J T Q M B Z T T P M J E X I J U F M J O F T P O U I F - % " J O E J D B U P S X I F O W J T J C M F M B O F
markers on the road are detected. A side flashes orange to alert the dri\
ver when
the vehicle deviates from its lane.
5 I F T Z T U F N E J T Q M B Z T P V U M J O F T P O U I F - % " J O E J D B U P S X I F O M B O F N B S L F S T P O U I F
road are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met aga\
in,
operation of the function is automatically restored. For example, LDA ma\
y not
function on the side(s) where white/yellow lines are not detectable.
Page 36 of 56
34
TOYOTA SAFETY SENSE™
7 & ) * $ - & 4 8 " : 8 " 3 / * / ( 4 : 4 5 & . 4 8 4
' 6 / $ 5 * 0 /
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
DISABLING SWS
ADJUSTING SWAY ALERT SENSITIVITY
1 S F T T i” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” to go back to the menu. Also, use “” to switch menus or display
top screen.
1 S F T T i 4 & 5 6 1 w P S i " 1 1 4 w T X J U D I F T P O U I F N V M U J N F E J B T Z T U F N
If you have Entune AudIo Plus, select “Setup” on the “Apps” \
screen.
4 F M F D U i 7 F I J D M F w P O U I F i 4 F U V Q w T D S F F O
4 F M F D U i 7 F I J D M F $ V T U P N J [ B U J P O w P O U I F i 7 F I J D M F 4 F U U J O H T w T D S F F O
$ I P P T F B D B U F H P S Z U P E J T Q M B Z U I F T F U U J O H T
4 F M F D U U I F T F U U J O H U P C F D I B O H F E
4 F M F D U i w P S i w U P D I P P T F U I F E F T J S F E M F W F M
U I F O T F M F D U i 0 , w
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
Page 37 of 56
35
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
TURNING SYSTEM ON/OFF
ADJUSTING SET SPEED
(1)
Note: Push once to turn DRCC
ON. Push again to turn OFF.
After DRCC is turned off and you
hold the cruise control switch
for at least 1.5 seconds, the
system switches to constant
speed control mode.
(2) (3)
DRCC helps maintain a pre-set distance to a preceding vehicle when the p\
receding
vehicle is traveling at a lower speed. This mode is always selected firs\
t when the
cruise control button is depressed. Constant speed cruise control mode i\
s also
available.
Increase speed
Descrease speed
Cruise control switch
Dynamic Radar Cruise Control (DRCC)
Vehicle will cruise at a set speed, decelerate to maintain selected dist\
ance from a
slower vehicle traveling in front and accelerate back up to the selected\
speed if the
vehicle in front changes lanes or speeds up.
1 V T I U I F 0 / 0 ' ' C V U U P O 5 I F i 3 " % " 3 3 & " % : w P S i
” indicator will come on.
1 V T I U I F M F W F S E P X O U P 4 & 5 T Q F F E
Q V T I J U V Q U P 3 F T V N F B O E Q V M M J U P S E F Q S F T T brake to Cancel.
1 V T I V Q U P J O D S F B T F U I F T F U T Q F F E
Q V T I E P X O U P E F D S F B T F N Q I J O D S F N F O U T
Cancel1
Set
Resume2
Display
Set speed
Dynamic Radar Cruise Control
vehicle-to-vehicle distance button
Indicators
Page 38 of 56
36
TOYOTA SAFETY SENSE™
ADJUSTING DISTANCE
To change the vehicle-to-
vehicle distance
Push the “
” button
to cycle through the
settings, which will change
progressively.
This mode employs a radar sensor to detect the presence of a preceding v\
ehicle
V Q U P B Q Q S P Y J N B U F M Z G U N
B I F B E
E F U F S N J O F T U I F D V S S F O U W F I J D M F U P W F I J D M F
following distance and operates to maintain a suitable following distanc\
e from the
vehicle ahead. These distances vary based on vehicle speed.
(1) (2) (3)
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.
Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automaticall\
y
decelerates your vehicle. When a greater reduction in vehicle speed is
O F D F T T B S Z
U I F T Z T U F N B Q Q M J F T U I F C S B L F T U I F T U P Q M J H I U T X J M M D P N F P O B U U I J T
U J N F
5 I F T Z T U F N X J M M S F T Q P O E U P D I B O H F T J O U I F T Q F F E P G U I F W F I J D M F B I F B E
in order to maintain the vehicle-to-vehicle distance set by the driver. \
A warning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long d\
ownhill
slopes.
Preceding
vehicle mark LONG
(default setting) MIDDLE
SHORT
Page 39 of 56
37
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
4 8 * 5 $ ) * / ( 5 0 $ 0 / 4 5 " / 5 4 1 & & % $ 3 6 * 4 &
$ 0 / 5 3 0 - . 0 % &
4 & 5 5 * / ( $ 0 / 4 5 " / 5 4 1 & & % $ 3 6 * 4 &
$ 0 / 5 3 0 -
Note: When your vehicle is too close to a vehicle ahead, and sufficient \
automatic
deceleration via the cruise control is not possible, the display will fl\
ash and the
buzzer will sound to alert the driver. An example of this would be if an\
other driver
cuts in front of you while you are following a vehicle. Depress the brak\
e pedal to
ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC “”, push button again to turn the system off
first, then push and hold button for at least 1.5 seconds to switch.
Note: When the engine is turned off, it will automatically default to DR\
CC.
Acceleration when there are no longer any preceding vehicles driving
slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
1.5 seconds
% 3 $ $ " % + 6 4 5 * / ( % * 4 5 " / $ & $ 0 / 5 * / 6 & %
Refer to a Toyota Owner’s Manual for additional information on DRCC o\
peration,
settings adjustments, limitations, and precautions before attempting to \
use it.
1 The set speed may also be cancelled by depressing the brake pedal.2 5 I F T F U T Q F F E N B Z C F S F T V N F E P O D F W F I J D M F T Q F F E F Y D F F E T N Q I L N I
5 P B E K V T U T Q F F E P S D B O D F M
T F F T U F Q T
B O E
P G " % + 6 4 5 * / ( 4 & 5 4 1 & & % P O
page 35.
Note: After DRCC is turned off
and you hold the cruise control
switch for at least 1.5 seconds,
the system switches to constant
speed control mode.
(1)
Page 40 of 56
38
AHB is a safety system designed to help drivers see more of what’s ah\
ead at
nighttime without dazzling other drivers. When enabled, AHB uses an in-v\
ehicle
camera to help detect the headlights of oncoming vehicles and tail light\
s of
preceding vehicles, then automatically switches between high and low bea\
ms
as appropriate to provide the most light possible and enhance forward vi\
sibility.
By using high beams more frequently, the system may allow earlier detect\
ion of
pedestrians and obstacles.
Refer to a Toyota Owner’s Manual for additional information on AHB op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
Automatic High Beams (AHB)
8 J U I U I F F O H J O F T X J U D I J O * ( / * 5 * 0 / 0 / N P E F
U V S O U I F I F B E M J H I U T X J U D I U P
“
” or “AUTO” position.
1 V T I M F W F S B X B Z G S P N Z P V
1 S F T T U I F i
” switch.
The AHB indicator will come on when the headlights are turned on automat\
ically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual
high beam indicator “
” turns on.
When all of these conditions are met, high beams will be automatically t\
urned on
B G U F S B Q Q S P Y J N B U F M Z T F D P O E
t 7 F I J D M F T Q F F E J T B C P W F B Q Q S P Y J N B U F M Z N Q I L N I
t 5 I F B S F B B I F B E P G U I F W F I J D M F J T E B S L
t 5 I F S F B S F O P P O D P N J O H P S Q S F D F E J O H W F I J D M F T X J U I I F B E M J H I U T P S U B J M M J H I U T U V S O F E
on.
t 5 I F S F B S F G F X T U S F F U M J H I U T P O U I F S P B E B I F B E
If any of these conditions occur, the system is designed to automaticall\
y turn off
high beams:
t 7 F I J D M F T Q F F E E S P Q T C F M P X B Q Q S P Y J N B U F M Z N Q I L N I
t 5 I F B S F B B I F B E P G U I F W F I J D M F J T O P U E B S L
t 0 O D P N J O H P S Q S F D F E J O H W F I J D M F T I B W F I F B E M J H I U T P S U B J M M J H I U T U V S O F E P O
t 5 I F S F B S F N B O Z T U S F F U M J H I U T P O U I F S P B E B I F B E
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1) (2)
TOYOTA SAFETY SENSE™