display TOYOTA VENZA 2010 Accessories, Audio & Navigation (in English)

128-8673b
36 of 48
- 26 -
SYSTEM SETUPSystem setup settings allow a user to adjust picture quality, turn
the screen or infrared transmitter ON/OFF, or choose a default
input source. To access the system setup settings, touch the
“SETUP” icon on the Main Menu. The Setup menu screen will
appear:
PIX (Picture Control)When watching a DVD, the picture quality can be adjusted to
suit a user’s preferences. Touch the PIX icon to bring up the
picture control display.
Note: The picture control display will automatically turn off if
no adjustments are made within 6 seconds. BrightnessTouch the
(brightness) icon to access the brightness
adjustment bar. Touch the
or
icon to increase or
decrease the brightness.

128-8673b
37 of 48
- 27 -
Contrast
Touch the
(contrast) icon to access the contrast
adjustment bar. Touch the
or
icon to increase or
decrease the contrast.
Color
Touch the
(color) icon to access the color adjustment
bar. Touch the or
icon to increase or decrease the
color.Tint
Touch the
(tint) icon to access the tint adjustment bar.
Touch the
or
icon to adjust the tint.
Picture Reset
Touch the
(reset) icon to access the reset adjustment
bar. Touch the or
icon to reset all picture settings
(brightness, contrast, color, and tint) to the factory settings.
Return Icon
Touch this icon to close the picture control display menu.

128-8673b
40 of 48
- 30 -
TROUBLESHOOTINGProblem SolutionIR Sensor Inoperative (DVD Player
Won’t Accept Commands From
Remote Control)• Verify that the batteries in the remote are fresh.
• Verify that the remote sensor eye is not obstructed.
• Verify that monitor select M1 or monitor select M2 has been selected correctly on the
Remote Control.
• ( When monitor Select M1 is pressed on the Remote Control, the remote will only operate
the passenger side monitor.)
• ( When monitor Select M2 is pressed on the Remote Control, the remote will only operate
the driver side monitor.)
Disc Will Not Play or Wrong
Region is Displayed• Check the type of disc you put into disc slot. This DVD system only plays digital video discs,
audio CDs and MP3s.
• Both the unit and the disc are coded by region. If the regional codes don’t match, the disc
can’t be played. This DVD player is set to Region 1.
Play Starts, Then Stops
Immediately• The disc is dirty. Clean it.
• Condensation has formed. Allow player to dry out.
• Disc is damaged; try another disc.
No Sound or Distorted Sound • If you are using the IR headphones, make sure you turn on the IRT power with the IRT ON/
OFF button on the Remote Control. Make sure that the headphone batteries are fresh.
• If you are using the vehicle radio, make sure that there is no plug in the vehicle’s AUX jack
and that the radio is in the AUX mode.
OSD Displays “Incorrect Disc
Format”• Disc loaded backwards, turn disc around so that the disc label is facing towards the viewer.

128-8673b
42 of 48
- 32 -
SPECIFICATIONSDisplay Type TFT Active Matrix LCD
Resolution 1440( W ) x 234 (H)
480 (RGB) ( W ) x 234 (H)
Pixels 336,960
Aspect Ratio 16:9
Back Light Edge Light Tube
Backlight life 10,000 hours
Power Source +12 VDC
Power Consumption 35W For 2 Monitors + 2 DVD
Operating Temperature -4°F ~ 149°F (-20°C ~ +65°C)
Storage Temperature -40°F ~ 185°F (-40°C ~ +85°C)
Video Display System NTSC/PAL