VOLKSWAGEN GOLF MK6 2012 Owners Manual
Page 361 of 516
gency and even then only with
special care and at low speed .
Wheel rims
Please first read and note the tory information and heed the on page 258.
The design
of the wheel bolts is matched to the
factory-installed wheels. different wheels are wheel bolts with the right leng th and head shape must be used . This helps to ensure
that wheels can be mounted securely and that the
brakes
page
rect tighteni ng torque The requi red
tightening tor que for your vehicle 's whee l bolts is
88 ft-lbs
Faci lity.
rim rings
Wh eel rims with bolted rim rings have several
parts . Th e parts are bolted together with special
screws in a spec ial process. This helps to ensure that they work properly , prevent leaks, run true
and safely. Damag ed wheel rims must be replaced,
New and
on
page 258.
Care,
tir es in
req uirements. <l
and you must never take them apart or try to repair
them yourself . Have an authorized Volkswagen
dealer or authorized Volkswagen
rims with
orative covers attached to the rim with self-locking
screws . you wan t to repl ace damaged wheel
covers , contact you r authorized Volkswagen dealer
or autho rized Volkswagen
U sing improper or dam aged wheel rims can affect driving safety, cause accidents and vere injury.
Use only whee l rims approved for the
Regularly check wheel rims for damage and replace them if necessary .
loosening and tightening of the on rims with rim ring s can
cause accidents and severe personal injury.
connections on rim rings.
H ave work on rim rings performed by an authorized wagen or authorized ice <l
Page 362 of 516
New tires
Drive a with ne w tires
km) beca use the tires must first
be
broken in. Tir es that are not broken
in have red uced traction and
braking performance
4
and
facturers because of different design
features and
tread design.
Replacing tires
Tires be in pairs
and not
(both front tires o r
both rea r tir es
at the same time)
and top
speed rat i
ng as the tires approved by
and
or
wide r than the dimensi ons
of the tires
approved by
for your
Larger tires
body or
other
parts of the
Tire Pressure Monitoring
after each tire change
New tires tend to be
a
Tires must have the required
Tires that do not have
enough
tread
dispose of tires in
requiremen ts.
the replacement
wint er tires or wide r,
tires, or a compact spare), then use
the
.
it w ith a tire matching the
others on yo ur
as soon as
care and maintenance
Page 363 of 516
di
mensions may differ from those nomi-
Tire
for different tire makes, or
the tire contours may be
different.
on
page 258.
The correct tire inflation pressure for
the factory-installed tires is
on a
138 is on the driver
door jamb
Under-
or over-inflation
of the
The correct tire pressure is very
important ,
is driven at higher speeds .
rect tire pressure causes increased
wear and even sudde n tire
and
ways before
to a tire . When tires are
warm, the pressure
be higher than
when the tires are
Do not reduce the tire pressure on
warm tires to match the required
tire inflation pressure. The tire infla
tion pressure
then be too
and
Checking tire
check the tire pressure
on tires when the
at
Page 364 of 516
Check tire inflation pressure
and on cold tires. Check all the
tires, including the compact spare,
if
any. colder climates tire pressure
shou ld be checked more often, but
on ly when the tires are co
ld. Always
use
an accurate tire pressure gauge.
After adjusting the tire inflation
pressures , make sure to screw the
valve caps back on; replace missing
valve caps immediately. Read an d
heed information on resetting the Tire
Pr essure Monitoring System
Remember that the vehicle
facture r, n ot the tir e manufacturer,
sure specified for the compact spare
on the
tire pressure labe l or on a
serious
personal injury, and even death.
pressure, and blowouts. Tires
with excessively low pressure
flex (bend) more, which can
cause
the tire to overheat and fail
suddenly without warning.
sure.
at the factory. The caps
must be screwed on tightly. Do not
use metal valve caps or
Underinflation increases fuel con-
s umpti on.
care and maintenance
Page 365 of 516
When the warns that the
pressure in at
one tire is too
check the tire pressure in
not be spotted by
true for
Tire Pres-4 tires with an accurate tire pressure
gauge. Low tire pressure
can-sure Monitoring System (TPMS). <l
Tire
on page 258.
R 18 92
R 18 92 H 35 245
The Tire
Monitoring is configured at the factory with the cor-
rect tire inflation pressure
engine and factory-
tires. The tire
on the driver door jamb =>fig. 138 . The tire inflation pressures for the
road tires are
on this
or on a separate
on the tire
on the use. The to
road tires. The Tire Monitoring must be recalibrated using
the
button whenever you remove and remount or change any
or replacement
a) Inform ation not avail able at tim e of printing
266 Care, m aintenance
<l
Page 366 of 516
Fig. 139 Tread patt ern: Wear indicator.
on page 258.
Tread depth
Most driving situations requi re as mu ch tread
dept h as possible and similar tread depth for the
tir es on the front and rear wheels. This is
peratures and under wet cond iti ons
ments .
Wint
er tires are no longer suitab le for winter ation once the tr ead pattern is wo rn down to a
depth of 3/16 in (4. 8 mm)
Tire wear and damage
diately reduce speed!
Check tires and wheel rims for
damage .
The tread depth of new tires can diffe r between tire models and manufacturers because of the different
design features and tread patterns.
Tread
wear indicator (TWI) in the tire
The
139 . wear indicator s are evenly spaced around
the tire. Mark ings on the sides of the tir es (for or sy mbol s) show the position of the
wear indicators .
Wear indicato rs show when the tires are worn
down. The tires must be replaced no later than
w hen the tread pattern is worn down to the wea r
indicat o
rs.
Worn tires are dangero us and can cause lo ss of vehicle control including serious p ersonal injuries.
Never drive a vehicle when the trea d on any tire is worn down to the wear indicators,
r e plac e them sooner.
and loss of control.
Worn tires reduce the ability of your
a tire is damaged, do not drive
a ny farther. Get expert assistance.
Facility,
or other qualified workshop and have
the ve
hicle checked .
Page 367 of 516
embedded objects have
ed to the inside tire, do not remo ve
them!
factors ,
you experience increased tire
wear under
or an authorized Volkswagen Service
Unbalanced wheels -The
are When
driving, however, various conditions
can cause a
to become
rebalanced .
A
be rebalanced if
a new tire has been mounted.
268 Care, maintenance
Wheel alignment-
causes excessive and
even tire wear, impairing
ty. you notice excessive or uneven
tire wear, have the
gen or an authorized
gen Service
Page 368 of 516
the luggage compart-
ment: Hand wheel holding spare ment:
Hand wheel holding compact
whee l
in place . spare
wheel in place.
first read and note the Return the vehicle tool kit to its
on Unhook the floor covering and fold
page of
Rem9ving the spare wheel gage compartment.
covering and hook it on the upper
whee ls, a compact spare wheel, for
or compact spare wheel 141 examp le, or i f the road whee ls are
counterclockw ise and remove the winte
r tires, use the spare wheel for a
spare
covering on the up- Rep
lace it w ith a tire match ing the
per edge of the luggage compart- others
on your vehicle as soon as
ment. possible.
i
nto the spare wheel so tha t Do not drive faste r than mph
the center hole
of the rim is a ligned
Avoid N Turn the hand wheel clockw ise until
braking and fast cornering!
the whee l replaced is secure ly in
p lace.
Page 369 of 516
the co mp act sp a re
to the tir e
pr ess ure spec ified f or
the
roa d
a crash or other accident,
and serious
the compact
spare
or
tion, heavy braking, and fast
pact spare
Compact spare
tires are designed for brief use
espe
the tire pressure
must be checked as soon as
The
tire taken off the rear
the
Page 370 of 516
N
change the tire's direction of
Ratio of height to
width (aspect ratio)
Nominal width
of tire
in millimeters
car tire
Treadwear,
traction and
temperature
grades
Rad ial
F ig. 142 International tire labeling.
on
page 258.
T i
re
tir e desig na tion of the manufacture r.