charging VOLKSWAGEN ID.4 2020 Owner´s Manual

x
Sun visors should always be f olded away
and sun blinds should always be retrac-
ted if they are not being used. In certain circumstances, the lamp
abo

ve the sun visor will go out auto-
matically after a few minutes. This prevents
the 12-volt battery from discharging. Sun blind in the glass roof
Fig. 97
In the roof: function button f
or control-
ling the sun blind.
The electric sun blind functions when the ig-
nition is switched on and can be opened and
closed via the function button in the headlin-
er or the vehicle settings in the Infotainment
system.
Opening and closing the sun blind
Opening the sun blind:

nating current (AC) or direct current (DC). You
can adjust this setting in the charging set-
tings in the Inf
otainment system

WARNING
Improper use of the sockets and electrical
accessories can cause fires and se vere inju-
ries.
x Never leave children unsupervised in the
vehicle. Sockets and the devices connec-
ted to them can be used when the igni-
tion is switched on.
x If the electrical device gets too hot,
switch off the device immediately and
disconnect it from the socket. NOTICE
x In order to pre
vent damage to the electri-
cal system, never connect equipment that
supplies electric power, such as solar pan-
els or battery chargers for charging the
12-volt battery, to the 12-volt socket.
x Use only electrical devices that have been
approved in accordance with current
guidelines concerning electromagnetic
compatibility.
x In order to avoid damage due to voltage
fluctuations, always switch off any electri-
cal devices before switching the ignition
on or off and before activating the vehi-
cle

Starting navigation
1. Touch .
2.
Touch the desired contact and address
data.
3. Touch
Start.
OR: touch .
NOTICE
If the address data of a contact is out-of-
date, na
vigation will still be performed to the
stored address. Make sure that the address of
the contact is up-to-date. Adding charging stops automatically
To automatically add charging stops, activ

ate
the automatic planning of necessary charging
stations along the route in the route options .
In the settings you can enter the desired
method of payment at the charging stations.
Depending on the selection and the a

vailable
data, suitable charging stations will be plan-
ned along the route in the map view.
The charging limit for the vehicle can be ad-
justed in the main menu
Vehicle .
Selecting alternativ
e charging stations Instead of the automatically planned charg-
ing stations, you can also select alternativ
e
charging stations for the planned routes.
1. Enter or select the desired destination.
2. Touch
Start.
3. Open the route plan.
4. Touch a planned charging station in the route plan.
Details of the planned charging station
are displayed.
5. Touch
Show more charging stations.
The location of additional nearby charg-
ing stations will be shown on the map.
6. Touch an alternative charging station nearby on the map or in the list.
Details of the alternative charging sta-
tion are displayed. 7. Touch
Charge here.
OR touch:
Add as stopover.
The previously planned charging station will
be replaced by the newly selected charging
station and the route adjusted accordingly.
If you select
Add as stopover, the selected
charging station will be kept if the
route is changed. Traffic information
Please refer to and on page 218 and
at the start of the chapter on page 238.
The Inf
otainment system automatically re-
ceives detailed traffic information when con-
nected to the Internet. This information is in-
dicated by symbols and colouring of the road
network on the map.
Receipt of traffic information depends
on the privacy settings set. No traffic
information is received in offline mode

x
Carry out pairing only when the v ehicle
is stationary. When some mobile devices are paired,
a PIN is shown on the display of the
mobile de

vice. To finish the pairing proce-
dure, enter this PIN on the Infotainment sys-
tem.
Bluetooth pairing via NFC
NFC is not available in all countries and vehi-
cle models. Depending on the vehicle equip-
ment, NFC is not available in every vehicle
with a wireless charging function.
Prerequisites for one-off pairing:
q NFC technology and a stowage compart-
ment with wireless charging function are
installed in the vehicle.
q NFC is activated on the mobile device. 1. Touch
Select mobile telephone.
2. Unlock the mobile device.
3. Place the mobile device correctly on the stowage area for the wireless charging
function.
4. Continue and confirm Bluetooth pairing in accordance with the displays on the
mobile device and Infotainment system.
The mobile device is paired with the Infotain-
ment system.
The wireless charging function is deac-
tivated while the Infotainment system
is in the
Known mobile phones menu. The wireless
charging function will be reactivated when
you leave the menu.
Managing connections
Prerequisites:
q The mobile device is paired and connec-
ted. 1. Touch
HOME
Mobile devices.
2. Touch the technology desired for the connection. Active and passive connection
At least one mobile de

vice must be connec-
ted to the Infotainment system in order to
use the functions of the mobile phone inter-
face. If several mobile devices are connected
to the Infotainment system, you can switch
between active and passive connections. Es-
tablish an active connection to the Infotain-
ment system in order to operate the mobile
phone interface with the desired mobile de-
vice.
Difference between the connection types
Mobile device is paired and connec-
ted. The functions of the mobile
phone interface are performed with
the data of this mobile device.
Mobile device is paired and connec-
ted. Only incoming calls can be ac-
cepted via the mobile phone inter-
face. No other functions are available.
Paired mobile devices are stored in the Info-
tainment system even if they are not current-
ly connected.
Changing the connection type (passive to ac-
tive) The connection type can be changed only if
se

veral mobile devices are connected to the
Infotainment system at the same time.
1. Touch . The mobile device with active
connection is marked.
2.

Touch the name of the desired mobile
device. Other mobile devices then auto-
matically have a passive connection.
User profiles
An individual user profile is automatically cre-
ated for every paired mobile device. Data
from the mobile device are stored in the user
profile, e.g. contact details. A maximum of
ten user profiles can be stored in the Info-
tainment system simultaneously.
Deleting a user profile 1. Touch .
The user profiles are located in the area
Select mobile telephone or Mobile devices.
Active
Passive
Mobile phone interface 24911A012720AB

Qi-capable mobile devices with larger dimen-
sions cannot be charged wirelessly.
Bef
ore charging, remove any foreign objects
with metallic components such as coins from
the stowage compartment and observe the
operating instructions for the mobile device.
To charge a Qi-enabled mobile device, re-
move the protective cover and place the en-
tire surface of the device flat in the centre of
the stowage area with the display facing up-
wards. The charging process starts automati-
cally.
The factory-fitted Infotainment system will
provide information about the start of the
charging operation and, where applicable,
about any foreign objects with metallic com-
ponents that are detected in the stowage
compartment. Remove foreign objects im-
mediately.
If the mobile device has not been positioned
correctly in the stowage area or is too large,
it cannot be detected or cannot be detected
correctly. In certain circumstances, the Info-
tainment system will report that there is
a foreign object in the stowage compart-
ment. The fault can be rectified if a suitable
mobile device is used and its position is cor-
rected.
Stowage compartment cover
The storage compartment for the wireless
charging function has a cover for the mobile
device

ordinates of the vehicle have been
recognised.
Timer-controlled charging Menu f
or a departure time. First open
the
Charging locations menu. A stored
charging location must be available

Upper battery charge limit
F
ull charging of the high-voltage battery is
not normally necessary in daily vehicle use.
The upper battery charge limit limits the
maximum charge level.

q
The charging cable and charging infra-
structure are in fault-free and tested
condition

WARNING
Driving when the charge level of the high-
v oltage battery is too low can lead to the
vehicle breaking down when in traffic, and
can lead to accidents and serious injuries. The high-voltage battery can only be
charged at charging stations that meet
the requirements of the corresponding coun-
try and at least the f

ollowing standards: