check engine VOLKSWAGEN JETTA HYBRID 2015 1B / 6.G Quick Start Guide

3
Energy flow diagram
Energy Flow Diagram
Important Safety Instructions and Warnings,
which you must read, are listed on the last panel under HYBRID DRIVE.
“Energy flow” refers to the direction that energy is moving through your vehicle’s drivetrain. While driving, diagrams in your multifunction and touchscreen displays will show one of five “energy modes,” depending on the direction of the energy flow. Stationary vehicle mode:
No energy flow.
Charge mode:
From wheels to battery.
Electric motor mode:
From battery to wheels.
Engine mode:
From gas engine to wheels (and to battery,
depending on speed and battery charge level). Boost mode:
From combustion engine and battery to wheels.
Using the touchscreenA color-coding system will show you the direction of energy flow through the drivetrain.Press the
CAR
hard key. The screen will default to the
“Energy flow” option. Different modes will display the energy flow to the wheels.
Text
* ENERGY22
to
38981
to watch
the Energy Display video.Standard text and data rates apply.
*Do no text while driving.
4
LEARN MORE ATknowingyourvw.com
To show your Zero Emission drivingDuring the last thirty minutes of your current trip, press
Hybrid
on the touchscreen, then
press
Zero Emission
on the touchscreen.
Using the multifunction displayPress the

button on the right side of the
steering wheel repeatedly until you see the energy flow diagram.Three images will be displayed, representing the gas engine, drivetrain, and battery. Arrows between the icons will indicate the direction of the Energy flow.To change the default Premium VIII displayPress the
SETUP
hard key, then press
Ve h i c l e
on the touchscreen.
If “Initial display: Hybrid” is checked, the initial display will be the vehicle’s Energy flow. If it is unchecked, the display will default to the most recently viewed setting.
To make “Energy flow” the default RNS 315 displayPress the
CAR
hard key.
Press the
SETUP
hard key.
Check “Initial display: Hybrid.”You may have to wait a few moments for the default to activate.
Important Safety Instructions and Warnings,
which you must read, are listed on the last panel under HYBRID INFOTAINMENT SYSTEM.
Zero Emission Driving Time. Premium VI I I display shown.
Hybrid
Functions & Features

25
Keyless Entry
UnlockMake sure you have your key fob with you.Then slide hand behind door handle, wait for the door to unlock. (Remember to avoid touching the indent on the handle front, or the door will remain locked.)Then pull the handle.LockMake sure you have your key fob with you.Then touch your finger to the lock depression on the handle.
Start EngineWhen starting your vehicle, the key fob must be in the cabin. Otherwise, the “Key not in range” message will appear on the multifunction display.Press down the brake pedal.Push the
START/STOP
button on the console.
Stop EngineMake sure the vehicle is parked.Press the
START/STOP
button.
Yo u
r vehicle’s engine will turn off.
NOTE: Be sure not to store your key too close to the vehicle for prolonged periods of time, as it may drain your vehicle’s battery.*Some heavy purses, bags, etc. may block the signal from your car to your key fob, preventing keyless access from working.The door will not lock if you are grasping the handle.
Unlock position
Important Safety Instructions and Warnings,
which you must read, are listed on the last panel under KEYLESS ENTRY.
Lock depression
26
Important Safety Instructions and Warnings,
which you must read, are listed on the last panel under TIRE PRESSURE MONITORING SYSTEM (TPMS).
LEARN MORE ATknowingyourvw.comTire Pressure Monitoring System (TPMS)
Cooler temperatures may cause a warning to appear and then disappear as the tires warm up. This is a good reminder to check and adjust the tires to the proper inflation pressure.Correct tire pressure
TPMS set button

Seeing the TPMS light? Here’s what to do.
If you see the TPMS light on your instrument panel or the message “Tire pressure too low” in the multifunction display, check all tires and inflate the low tire(s) to the correct pressure as soon as possible. The correct tire pressure is displayed on the sticker on the driver’s door jamb. Inflate your tire(s) to those specifications, not to the number on your tires.After inflating the low tire(s) to the correct pressure, turn the ignition on and press the
SET

button inside the glove compartment for five seconds, until you hear the chime.
Keyless Entry /
TPMS