VOLKSWAGEN TOUAREG 2014 2.G Owners Manual

x Press the NAV Infotainment button or the ... ... function key to switch to the Navigation main menu.
x In the Navigation main menu, press the NAV Infotainment button or MAP function key to switch back to the map view.
The map is displayed in the most recently selected type (2D or 3D). 3D and “Autozoom” are activated by default
Alternative routes: Selecting a calculated route
In the Navigation settings menu, you can specify that 3 alternative routes are suggested on the map after the start of route guidance. These 3 routes correspond to the available route criteria Fast, Short and Economical route. Route 1 corresponds to the current setting in this case.
x Select the required route by pressing on the right of the map.
The setting for the route criteria in the Route options menu is changed accordingly.
If no route is selected then route guidance starts automatically after about one minute, using the setting selected in the Route options.
Interrupting route guidance
Active route guidance can be stopped and later resumed from the new vehicle position at any time in the Navigation main menu.
x In the Navigation main menu, press the Stop function key ⇒ fig. 218.
x Press the Start function key to continue route guidance ⇒ fig. 215.
Provision of navigation recommendations

Fig. 219 3D map display during route guidance.

Fig. 220 Visual navigation recommendations in the instrument cluster.

Acoustic driving recommendation settings
The volume of an acoustic driving recommendation can be adjusted to a predefined minimum and maximum volume using the volume control D. All additional acoustic driving recommendations are issued at this volume.
The volume of audible navigation recommendations can be preset in the volume settings.
In the Navigation settings menu, you can switch off spoken navigation recommendations or define their level of detail.
Even when navigation information is switched off, you can show them briefly in the map view by
pressing the setting knob ⇒ fig. 133 (3).
If a turn was missed during route guidance and there is no possibility to turn, continue driving until the navigation system offers an alternative route.
The quality of the announcements given by the unit depends on the navigation data provided.
Route guidance in tour mode

Fig. 221 Tour plan in Tour mode.

Showing routes or a maneuver list

Fig. 222 Maneuver list in the split screen.

During route guidance, you can manually exclude the route section immediately ahead of your current location. The route exclusion is revoked when route guidance is stopped.
x In the Navigation main menu, press the Route function key ⇒ fig. 218.
x In the pop-up window, press the Avoid area function key.
The Avoid area menu opens. The length of the stretch to be excluded from the current vehicle position.
x Press the ` function key to specify up to which route section the route ahead should be blocked.
x Press the a function key to shorten the route exclusion.
x Press the OK function key to confirm the exclusion entry.
In the Navigation main menu ⇒ fig. 218, the icon for an active route exclusion

Display of traffic congestion and dynamic route guidance

Fig. 223 SIRIUS traffic flow display and traffic congestion on the map.

The route ahead can also be excluded manually, to start a new calculation of the route
⇒ page 331.
Displaying Sirius traffic reports in a list

Function key: Effect
= Suggest 3 alternative routes : 3 alternative routes are displayed on the map following the start of
route guidance ⇒ page 328.
Voice guidance : Setting for the spoken navigation recommendations
Complete : Detailed driving recommendations with lane recommendation and additional information.
Compact : Some additional navigation recommendations and information are left out.
Off : No spoken navigation recommendations.
Time display : Display  during route guidance.
Arrival time : The estimated time of arrival at the destination is displayed.
Driving time : The estimated driving time until reaching the destination is displayed.
Map icons : Select icons for display on the map
= Speed limit display : The speed stored in the navigation data for the road you are currently travelling on is displayed on the map. The actual speed limit may differ from this display.
Advanced navigation settings : Allows settings for demo mode.
SIRIUS traffic ID : The Sirius traffic ID and the Internet address and the telephone number of the Sirius activation hotline are displayed in the pop-up window
Instrument cluster guidance : Visual navigation recommendations for guidance in the instrument
cluster ⇒ page 328.
Arrow view : Travel direction arrows show the direction of travel and the distance to the next turn-off point.
Street view : Road and route view corresponding with the map display in the Infotainment System.
= Voice guidance during phone call : Spoken navigation recommendations are also given during a telephone call.
Advanced navigation settings: Demo mode and manual location
x In the Advanced navigation settings menu, check the check box in the Demo mode function key by pressing it = to start virtual route guidance to the entered destination.
x Press the Enter current position manually function key to select a manual location in the same way you entered a destination
If demo mode is enabled, an additional pop-up window opens when you start route guidance.
x Pressing the Demo mode function key starts a “virtual route guidance” to the destination you have entered.
x If you press the Normal mode function key, a “real route guidance” starts.
The sequence of events and the operations in virtual route guidance are similar to those in real route guidance. Once a manual location has been entered, the virtual route guidance starts from that position.
Virtual route guidance is repeated when you reach the fictitious destination and always starts again from the starting point if it is interrupted.

When real route guidance is started following route guidance in demo mode, the unit first has to reorient itself. Depending on the number of currently received satellites, this orientation may take some time. Vehicle movement can reduce the re-orientation time
If the vehicle is moved and the unit can determine its current location by GPS, any manually entered location will be overwritten with the current vehicle location.
Disable demo mode after use, otherwise you will be prompted to choose between virtual and normal route guidance each time you start route guidance.

MAP (map display)