VOLVO 940 1982 Service Repair Manual
Page 141 of 168
70019401960 Specifications -------------------------------------------------------------
Oil pressure, overdrive
Direct drive .............................................. .. . .
Overdr ive engaged
D 24 TmC, with asbestos-free friction linings ................... .
Gasoline turbo with asbestos-free friction linings ................ .
Gasoline turbo with old type friction linings ..................... .
Remaining, with
old type friction linings ........................ .
All ......................................................... .
Early type friction linings (1987) ............................... .
Asbestos -
free linings (1988-) ................................. .
( Tightening torque data
8ellhousing ................................................. .
Gear
lever mounting bracket bolts ............................. .
Gearbox cover
bolts ......................................... .
Countershaft, M 47
.......................................... .
Drive
flange nuts, M 47, M 16 ................................. .
M20 ...................................... .
M46 ...................................... .
Rear cover, M 46
............................................ .
Rear cover,
5th gear synchronization, M 47 II ................... .
Oil drain plugs .............................................. .
Lubricant
/ Type ....................................................... .
Capacity, M46,
early type, -1990 Litres (US qts) ............... .
late type, 1991-Litres (US qts) ................. .
M
47, early type, Litres (US qts) ...................... .
late type, Litres (US qts) ....................... .
• On complaints about gearbox noise, Volvo Thermo oil (PIN 1161 243-9) can be used. Volvo Thermo oil is only recommended for vehicles driven in areas where
ambient temperature seldom drops below -10°C (+14°F), or high mileage vehicles such as taxis. NOTE: Do not mix oil types.
Section 4 Power Transmission
approx 0.15 MPa (21.3 psi)
Type J
2.8--3.1 MPa (400-440 psi)
2.8--3.1 MPa (400-440 psi)
3.9-4.2
MPa (555-600 psi)
3.7-4.0
MPa (525-570 psi)
Type P
2.8--3.1 MPa (400-440 psi)
Type J/P-hybrid
3.7-4.0 MPa (526-569 psi)
2.7-29
MPa (384-412 psi)
Nm ft Ib
35-50 (25-35)
40 (30)
15-25 (10-20)
35-45 (25-30)
70-90 (50-65)
90-110
(65-80)
165-180
(120-130)
12-18 (9-13)
120 (87)
27-40 (20-29)
Litres U S qts
ATF* type F or G
2 .3 (2.4)
2.6 (2.7)
1.3 (1.4)
1.6 (1.7)
139
I
.til I! II I! II I! ·1 , I!
Page 142 of 168
70019401960 Specifications
Section 4 Power Transmission
Automat ic transmission BW 55
Make and type .. ............................................ .
Reduction ratios, 1 st gear ..
................. ................. .
2nd gear
................................... .
3rd gear
................... ................. .
Reverse
.................................... .
Torque converter, type ratio
................................ .. .
Lubricant.
........................... ....................... .
Fluid capacity .................... ........................... .
* ATF = automatic transmission fluid.
1.45:1 x Converter ratios
Borg
Wirner type
55
2.45 :1
1 : 1
2.21 : 1
1-approx 2:1
ATF, type G (or F)*
6.9
litres = 7.2 US qts (inc!. approx 2.5 litres = 2 .6
US qts in torque converter)
.~ Engine type Normal
stall speed*
rls (r/min)
Type
designation
Type plate
colour
....... WAOIIHUH
55 e:> ~~D ~~~I~ f'"OUTUTAUS
B28A 38.3 (2300) 029 SERIAl~ Light brown 131755 * At sea level.
Stall speed drops 2 rls (120 rpm) for each 1000 m increase in altitude .
Throttle cable setting
Distance between adjusting sleeve and stop
at idling .................................................. .
kick -down
........................ ........................ .
C leara nces
Oil pump: pump body -outer cog wheel ....................... .
arc segment -
large cog wheel ...................... .
axial clearance .................................... .
Clutch C2, brakes B1 and B2:
clearance between
clutch assembly pressure plate and
locking ..................................................... .
Input shaft, clutch C1 axial clearance .......................... .
Output shaft,
axial clearance ................................. .
Line pressure
Idling D .................................................... .
R ..................... .... ........................... .
Stall speed, D .................. .............. ...... ........ .
R .............................................. .
140 0.25-1
.0
mm 51 +1.6mm -0.6
0.07-0.30 mm
0.11-0 .50 mm
0.02-0.10 mm
0.3-1 .2 mm
0.20-0 .55 mm
0.20-0.55 mm
(0.001-0.040 in) (2 +0.63 in) (-0.024Ih)
(0.0027-0.118 in)
(0.004-0 .019 in)
(0.0008-0.004 in)
(0.0118-0 .0472 in)
(0.0078-0.0216 in)
(0.0078-0.0216 in)
0.53-0.63 MPa (75-90 psi)
0.74-0.91 MPa (105-129 psi)
1 .12 -1.37
MPa (159-195 psi)
1.54-1.96
MPa (219-279 psi)
Page 143 of 168
Regulator press ure
Final drive ratio 3.31:1
At 30 km/h (19 mph) ........................................ .
At 60 km/h (38 mph) ....... ................................. .
At 110 km/h (69 mph) ....................................... .
Gea r ch anging speeds
Limits for kick -down shift points , km/h (mph)
1-2 ........................................................ .
2 - 3
......... ............................................... .
3-2 ............................. ........................... .
3-1 ...................................................... .. .
Tran smiss io n brake an d clut ch pla tes
Min permissible thickness .................................. .. .
( Tig ht enin g to rq ue da ta
Drive plate - torque converter ....................... ......... .
Torque converter casing -engine, M
10 ....................... .
M12 ..................... ..
Center support -transmission housing
tighten
alternately in steps of 7 Nm (5 ft Ib) ................... .
Pump cover -pump housing
.................. ............... .
Pump -transmission housing ...
............................. .
Plate above parking detent ............................ .... ... .
Torque converter casing -transmission housing
4 x M
10 .................................................. .
2xM12 ....... . r. ............... ......................... .
Rear housing -transmission housing .......................... .
Valve bodies -transmission casing ........................... .
Valve bodies, for cam, M 6 ................................... .
Valve bodies, other bolis, M 5 ................................. .
Cover
plate - gearbox housing ............................... .
Strainer -
lower valve housing M 6 ......................... ... .
Oil pan - transmission housing (yellow gasket) ................. .
Oil pan -transmission housing (blue gasket) ................... .
Drive
plate - output shaft .... ............................. ... .
Blind plug, for pressure test ....................... .. ......... .
* Seal with Locking fluid 1 161 053-2 (1 161 054-2) .
0.10-0.13 MPa
0.14-0.18 MPa
0.30-0.36 MPa
71 (44)
128
(80)
117 (73)
approx.
60 (38)
2.1 mm
Nm
41-50
35-50 55-90
24-28
6-9
22-28
6-9
Nm
26-40
47 -60
26-40
8-12
6-9
5-6
5-6
6-9
6-10
8-12
40-50·
9-12
70019401960 Specifications
Section 4 Power Transmission
(14-18 psi)
(20-26 psi)
(43-51 psi)
(0.083 in)
ftlb
(30-37)
(26-37)
(41-66)
(18-21 )
(4-6)
(16-21)
(4-6)
ftlb
(19-29)
(35-44)
(19-29)
(7-9)
(4-6)
(3-4)
(4-6)
(3-4)
(4-8)
(7-9)
(29-37)
(6-9)
141
'", "" '", "" ·11"
"" ·11.· 1111 ,11'
Page 144 of 168
70019401960 Specifications
Section
4 Power Transm ission
Automatic transmission AW 70171/72
13B 733
Engine Type Stall speed1 Volvo PIN Plate
rls (rpm) colour
B19E AW70 36
.7 (2200) 1208314 Silver
B23E AW71 35.0 (2100) 1208300 Orange
B23FT AW71 41.7
(2500)2) 1208334 Pink
B28A AW71 35.0 (2100) 1208360 Yellow
B28E AW71 35.0
(2100) 1208310 Black
B28F AW71 33.0
(2000) 1208248 Blue
B200K AW70 38.0
(2300) 1208332 Red
B200E AW70 35.0
(2100) 1208415 Green
B200F AW70 37.0 (2200) 1208659 Pink
B230A AW71 35.0 (2100) 1208304 Black
B230K AW71 -1986 42.0 (2500) 1208371
Pink
AW71
1987-42 .0 (2500) 1208417 Blue
B230F AW70 USNCDN
5-door, Japan, 33.0 (2000) 1208563 Dark brown
Australia 1988
AW70
USNCDN Japanl 33.0 (2000) 1208604 Pink
Australia
AW70 Others 33.0 (2000) 1208652 Red
I
B230FB AW71 33.0 (2000) 1208682 White
B234
FIG AW72 USNCDN 30 .0 (1800) 1208637 White
41.0 (2450) 1208666 Orange
Europe 30.0 (1 800) 1208638 Black
41.0 (2450) 12086673
) Green
B230FT AW71 45.0
(2700)2) 1208334 Pink
45.0 (2700)2)
1208661
Yellow
USNCDN/Japanl
Australia 1990 42.0
(2500)2) 1208642
Others 1990 42,0 (250W) 1208643
B280E AW71 Scandinavia 35
(2100) 12085333
) Green
AW71
Others 35 (2100) 1208534 Orange
B280F AW71 35 (2100) 1208532 Purple
AW71 35 (2100) 12085333
) Green
1) At sea level. Stall speed drops 2 rls (120 rpm) for each 1000 m increase in altitude. 2) Start-stop . 3) With kick-down inhibitor.
AW70/71 AW72
Reduction ratios, 1 st gear .................................... 2.45 :1 2.83:1
2nd gear .................... ....... ......... 1.45 :1 1.49:1 x Converter
3rd gear
..................................... 1:1 1 :1
ratios
Overdrive .
........ ............... ............ 0.69:1 0.73:1
Reverse
...... . .............................. 2 .21 :1 2.70:1
Torque converter :
reduction ratio
....... .......... ............. ............... 1-2:1 approx
Lubricant,
fluid capacity ....................................... see page 13
142
Page 145 of 168
(
Throttl e cable se tting
Distance between adjusting sleeve and cable stop
at idling .............................. mm 0.25-i.O
(in) (0. 001-0.040)
kick-down ............. .... mm 50.4-52.6 (1.99-2.1)
Sol e n o id va lv e
Resistan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 0
C lea ra n ces
Oil pump : pump body -outer gear wheel. ............... mm (in)
arc segment -large gear wheel ...................... mm (in)
axial clearance ................................ ..... mm (in)
Brake BO: clearance between clutch pressure plate
and lock ring ....................................... mm (in)
Clutch C2, brakes B1 and B2
clearance between clutch assembly pressure plate
and lock ring ....................................... mm (in)
Input shaft, clutch CO, axial clearance ........... ... ..... mm (in)
Output shaft, axial clearance ................. .......... mm (in)
B ra ke a nd clutch ring s
0.07-0.15
0 .
11-0.14
0 .
02-0.05
0.35-1.60
0.3--1.2
0 .
3--0.9
0.3--0 .9
Minimum permissible thickness ..................... .... mm (in) 2.1 mm
Line pr ess ure
Engine Tra nsmi ssion Press ure, 0
MPa (psi)
B
19/200 ElF AW70 0.35-0.44
(50--63)
B23E AW71 "
B230K -1986 AW71 "
B200K, B230F AW70 0.46-0.54 (65-77)
B23/230FT AW71 "
B 230 A
, B 230 FB AW71 "
B230K 1987-AW71 "
B28A, E, F AW71 "
B234 FIG AW72 0.44-0
.52 (63--74)
B280
AW71 0.51 (73)
S tall spee d press ure
Engine T
ra n smi ssion Press ure, 0
MPa (psi)
B
19/200 E AW70 1.00--1.20 (142-205)
B23E AW71 "
B230K -1986 AW71 "
B 200 K, B 230 F AW70 1.00--1.20 (142-205)
B23/230 FT AW71 "
B 230 A, B 230 FB AW71 "
B230K 1987-AW71 "
B28A, E, F AW71 "
B234 FIG AW72 1.12
-1.32 (159-188)
B280 AW71 1
.15 (164)
7001940 1960 Specifications
Section
4 Power Transmission
025-10mm
(0.003 -0 .006)
(0.0043--0 .0055)
(0.0008-0.0019)
(0.0138-0.0629)
(0.0118-0.0472)
(0.0118-0.0354)
(0.0118-0 .0354)
(0.083)
Pres sur e, R
MPa (psi)
0.50--0 .64 (71-91)
"
"
0.70--0.82 (106-117)
"
"
"
"
0.64-0.76 (91-109)
0 .
77 (110)
Press ure, R
MPa (psi)
1.37-1.70 (195-242) "
"
1.50--1.90 (213-270)
- -
"
"
"
1 .55-1.95 (220--277)
1 .
74 (247)
-
143
I
I
I
I
Page 146 of 168
I
I
70019401960 Specifications
Section
4 Power Transmission
Gove rnor pressure
3.54:1
Speed Pressure Speed
35 km/h 0
.11- 0.17 MPa 30 km/h
(22 mph) (15
.
6-24.2 psi) (19
mph)
55 km/h 0.17-0.23
MPa 55 km/h
(34 mph) (24
.
2-32.7) (34 mph)
110 km/h 0.38-0.50 MPa 108 km/h
(69 mph) (54
.1 -71.1 psi) (67
mph)
* Only for AW 72.
Shift speeds km/h (mph)
Eng in e Type Rear ax
le
ratio
B 19 E AW70
3.
91 :1
B23E AW71 3
.73:1
B23FT AW71 3.73:1
B28A AW71 3.54:1
B28E AW71 3.54:1
B28F AW7 1 3 .54 :1
B200 F AW70 4.10:1
B200E AW70 3.91 :1
B200 K AW70 3.91 :1
B230 A AW71 3.73:1
B230K -19 86 AW71
3.91 :1
B230 K 1987 - AW71
3.91 :1
B230 F2
) AW70 4.10:1
B 230 F 1989-3
) AW70 4.10:1
B230FT AW71 3.73:1
B
230 FT/GT 1990 AW71 3.73:1
B234F AW72 4.10:1
B280E AW71 3
.91 :1
B280 F AW71 3.73:1
Throttle
valve opening %
1) Kick-down .
Rear axle r ed uction ratio
3.73:1 3.91:1
P r
essure Speed Pressure
0.09- 0.15 MPa 29 km/h 0 .09-0.15 MPa
(12.8-21.3 psi) (18
mph) (12
.8-21.3)
0.16-0.22
MPa 53 km/h 0
.16-0.22 MPa
(22 .8-31 .3 psi) (33
mph) (22
.8-31.3 psi)
0.41-0 .
53 MPa 103 km/h 0.41-0.53 MPa
(58.3-8.4 psi) (64 mph) (58
.3-8.4 psi)
1
-2 2-3 3-4 4-3
62 (39) 103 (64) 109 (68)
38 (24)
63 (39)
105 (66) 135
(84)
39 (24)
63 (39)
105 (66) 111 (69) 39 (24)
73 (46) 123
(77) 123 (77) 28 (24)
67 (42) 112 (70) 119 (74)
29 (24)
67 (42) 112
(70) 119 (74) 29 (24)
57 (36)
101 (63) 110 (69)
37 (23)
67 (42) 113
(71) 114 (71) 40 (25)
67 (42) 113 (71) 114 (71) 40 (25)
71 (44) 119 (74) 118 (74)
27 (17)
66 (41)
111 (69) 112 (70) 35 (22)
55 (34) 98 (61) 107 (67)
35 (22)
63 (39)
106 (66) 108 (67)
37 (23)
57 (36) 99 (62) 110 (69)
36 (23)
63 (39) 105 (66) 111 (69) 39 (24)
65 (41) 112
(70) 130 (81) 27 (17)
56 (35) 102 (64) 116 (73) 33 (21)
60 (38) 105 (66) 116 (73 )
44 (28)
63 (39) 110 (69) 121 (76)
46 (29)
1001) 1001
) 75 0
2) USA/Canada estate cars -1988, 1989-: other markets . 3) USA/Canada/Japan! Australia 1989-.
Mechanical lock-up B230 K
Engages
at ......................... ... ........... km/h (mph) 85 (53)
Disengages at
.................................... km/h (mph) 83 (52)
* Applies to 1 208652 . 1 208604 77 (48), 73 (46). "Applies to 1208643.
144
B230F
78 (49)
76 (47)
Speed
27 km/h
(17 mph)
25 km/h *
(16 mph)
50 km/h
(31 mph)
45 km/h *
(28 mph)
98 km/h
(61 mph)
95 km/h *
(59 mph)
3-2
97 (61)
99 (62)
99 (62)
115 (72)
106 (66)
106 (66)
94 (59)
107 (67)
107 (67)
111 (69)
105 (66)
91 (57)
100 (62)
93 (58)
99 (62)
106 (66)
93 (58)
99 (62)
104 (65)
1001
)
B230F*
1989-
9230 FB
B234F
86 (54)
84 (53)
4.10:1
Pressure
0.09-0.15 MPa
(12.8-21.3 psi)
0 .
16-0.22 MPa
(22 .8 -
31.3 psi)
0.41-0.53
MPa
(58 .3-8.4 psi)
2-1
49 (31)
50 (31)
50 (31)
58 (36)
53 (33)
53 (33)
46 (29)
55 (34)
55 (34)
56 (35)
55 (34)
44 (28)
52 (32t
45 (28)
50 (31)
54 (34)
41 (26)
49 (31)
51 (32)
1001
)
B230 FT""
95 (59)
90 (56)
Page 147 of 168
(
(
Tightening torques
AW70, AW71, AW72
Converter casing -engine, M 10 ...................... .. ...... .
M12 .................. ......... .. . .
Drive plate
to torque converter ................... ............. .
Centre support to gear case:
tighten alternately
in steps to 7 Nm (5 ft Ib) ............... ... .
Pump cover to pump body .......................... ......... .
Pump assembly to gear case .............. ................... .
Plate above parking pawl ............................. ....... .
Converter casing gear case
4
x M 10 ................................ ................. .
2 x M 12 ..
.............. ................................. .
Rear extension housing to gear case
.......................... .
Valve bodies, for cam M 6 .................................... .
other bolts, M 5 ...
.............................. .
Oil strainer to lower valve body ........... .. ............ ...... .
Cover plate
to gear case, M 6 ................................ .
Valve body to gear case ..................... .......... ..... . .
Oil pan to gear case .......... ........ ..................... .. .
Coupling flange
to output shaW .................... ........... .
Blind plug for pressure test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
... .
Nut, oil cooler to gear case .
.................................. .
Speedometer drive
................... .................. ..... .
Nut, oil dipstick tube
........ ................................. .
Solenoid valve
.................... .. ........................ .
Drain plug
to oil pan ........................................ . .
• Use locking fluid PIN 1161 053-2 (1161 054-0) .
Nm
35-50
55-90
41-50
24-28
6-9
22-28
6-9
27-42
48-68
27-47
6-9
5-6
5-6
6-9
8-12
4-5
40-50
5-9
20-30
4-6
65-70
10-16
18-23
70019401960 Specif ications
Section
4 Power Transmission
ftlb
(25-36)
(40-65)
(30-36)
(17-20)
(4-6)
(16-20)
(4-6)
(20-30)
(35-49)
(20-34)
(4-6)
(3.5-4)
(3.5-4)
(4-6)
(6-9)
(3-3.5)
(30-36)
(3.5-6)
(14-22)
(3-4)
(47-51)
(7-12)
(13-17)
145
II
" II ., II ' . .. • • ..
Page 148 of 168
70019401960 Specifications
Section 4 Power Transmission
Automatic transmission AW 30-43 LE
Engine Type Notes Normal stall speed1
) Volvo PIN Decal rl s (r/min) colour
B6304 F AW3Q-43 35 (2100) 1208657 Black
1) At sea level. Stall speed drops 2 rls (120 r/min) for each 1 000 m (3300 feet) increase in altitude.
Reduction ratios, 1 st gear .................................... .
2nd gear .
.................... ' .............. .
3rd gear
.................................... .
4th gear .
........ ... ................... ..... .
Reverse
................................... . .
Torque converter, K-factor
.................................... .
diameter
............ ....................... .
reduction ratio .
............... ... ........... . 2.80
:1
1.53:1
1 :1
0.75:1 2 .
39:1
177
254
mm (10 in)
1 :
1-2.1:1
Lubricant, fluid capacity ...................................... .
type
........ ...................................... . approx
7.7
litre (8.1 US qt)
ATF-fluid Dexron II 0
Line Press ure
Engine Transmission Idling, position
D Idling, position R
Pressure MPa (psi)
Pressure MPa (psi)
B6304F AW3Q-43 0.41-0.45 (58-64) 0.61-0.67 (87-95)
Line Pressure at stall speed
r
Engine Transmission Idlin
g, position D Idling, position R
Pressure MPa (psi)
Pressure MPa (psi)
B6304F AW3Q-43 1.24-1.34 (176-191)
1.44-1.74 (205-248)
146
Page 149 of 168
(
7001940/.960 Specifications
Section 4 Power Transmission
Gear shift speeds, km /h (mph)
Mode selector in position ECONOMY (E). Sh ift selector in position D. Thro ttle opening in %
Engine Type Final drive 1-2 2- 3 3-4
3-4 4-3 3-2 2-1
ratio
(100+KD) (100+KD) (75) (100+KD)
(100+KD) (100+KD) (100+KD)
B6304F AW30--43 3.73:1 58 114
157 180 175 105 45
Mode selector in position SPORT (S). Sh ift selector in pos ition D. Thrott le open ing in %
Eng ine Type F
inal drive 1-2 2-3 3-4 3-4 4-3 3-2 2-1
ratio
(100+KD) (100+KD) (75) (100+KD) (100+KD)
(100+KD) (100+KD)
B6304F AW3D-43 3.73:1 58 114 177 180 175 105 45
Mode selector in position WINTER (W). Shift se lector in pos ition D. Thrott le open ing in %
Eng ine Type F
in al drive 1-2* 2-3* 3-4
3-4 4-3 3-2* 2
-1*
rat io (100+KD) (100+KD) (0-100)
(100+KD) (0-100)
(100+KD) (100+KD)
B6304F AW3D-43
3.73:1 50 100 50 170 40 70 20
* 1st and 2nd gear only used on kick-down .
Mechanica l lock-up (LOCK-UP), km/h (mph). Shift selector in pos ition D. Thrott le open ing in %
ECONOMY (E ) SPORT (S ) WINTER
(W)
Eng
ine Type Fin
al drive 2 3 4 2
3 4 3
ratio
(100+KD) (100+KD) (100+KD)
(100+KD) (100+KD) (100+KD) (15-98)
in out in out in out in out in out in out in out
B6304F AW3D-43 3.73:1
85 1 77 130 1123 180 1175 85 1 77 130 1123 180 1175 50 1 40
147
I
III 'II III II III
,II
W · III
Page 150 of 168
700/940/960 Specifications
Section
4 Powe r Transmission
Components
Contro l unit
-Volvo part number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515646
ShiH position sensor
-Volvo part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515639
- Aisin Warner number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9903740153
Mode se lector
-Volvo part number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515640
Solenoids :
ShiH solenoid
1 (51) and 2 (52)
-Volvo part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515643
- Aisin Warner number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9903740040
Resistance at +25°C (7rF). . . . . . . . .. ... . . . . . . . . .. . . . . .. . . . . .. 13±20
Lock-up so lenoid (SL)
-Volvo part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515644
- Aisin Warner number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9903740041
Resistance at +25°C (7rF) ............. " . . . . . . . . . . . . .. . . .. . . 13±20
Line pressur e sole noid (5TH)
-Volvo part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515645
- Aisin Warner number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9903457389
Resistance at +25°C (7rF). . . . . . . . . . . . . ... . .. ..... . . . . ... .. . . 13±20
Speed sensor
-Volvo part number ... ..-: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515641
- Aisin Warner number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9903740151
Oil te mp eratur senso r
-Volvo part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3515642
- Aisin Warner number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9903740154
Resistance at
+160°C (320°F)......... .. .... . ......... ....... .............. 20.7±2.90
-O°C (32°F) .. . . . . . . .. . . . . . . . . . . . . . . .. . . . . . . .. . . .. . . . .. . . . . . . 2067±396 0
<O°C «32°F) ....... .................... : . . . . . . . . . . ... . .. . . . >20670
Tightening torques
Nm (ft Ib)
Converter casing -engine, starter motor (2 pcs) ................ . 40.0 30 others .............. ............... . 48.0 35
Drive plate -torque converter ................................ . 30.0 22
Coupling flange to output shaft ............................... . 50.0 36
Plug, oil pan ................................................ . 20.0 14
148