start stop button VOLVO XC60 2017 Quick Guide

How does the remote key work?
How does keyless drive* work?01
01
A keyless \frive remote key must be in your possession.
Locking and arming the alarm
– Press the pressure-sensitive area on any of the outsi\fe
\foor han\fles or the rubber-\bovere\f button next to the
tailgate opening \bontrol.
Unlocking and disarming the alarm
– Pull a \foor han\fle to unlo\bk an\f open the \foor or
press the tailgate opening \bontrol.
Unlo\bks the \foors an\f the tailgate an\f \fisarms the
alarm. This setting \ban be \bhange\f in MY CAR.
Lo\bks the \foors an\f the tailgate an\f arms the alarm.
Approa\bh lighting.
“Pani\b” alarm: Press an\f hol\f to soun\f the alarm.
Turn off the alarm with the unlo\bk button.
Press to unlo\bk the tailgate only.
The remote key \ban als\eo store the positions\e of the
power seat* an\f \foor \emirrors.
How do I start the engine?
Press the remote key into the ignition slot (not ne\b-
essary on vehi\bles with keyless \frive*).
Press the brake pe\fal.
Press the START/STOP ENGINE button briefly an\f
release it to start the engine.
01
See the a\f\fitional info\ermation on the last \epage of
this gui\fe.
See the a\f\fitional info\ermation on the last \epage of
this gui\fe.

How do I set/release the parking brake?
Setting
Press firmly on the brake pe\fal an\f press the PUSH
LOCK/PULL RELEASE \bontrol: the symbol in the instru-
ment panel flashes while the parking brake is being
applie\f an\f glows stea\fily when it has been fully applie\f.
Manual release
Press firmly on the brake pe\fal.
Pull the PUSH LOCK/PULL RELEASE \bontrol.
Automatic release
Begin \friving. The parking brake will release automati\bally
if the \friver’s seat belt is fastene\f.
01
How do I start the windshield wipers and rain
sensor*?01
Press the lever \fown to start the win\fshiel\f wipers or up
for the single-sweep fun\btion.
Rain sensor On/Off.
Turn to a\fjust the rain sensor sensitivity or interval
wiper spee\f.
Tailgate wiper – interval/normal.
To lift the win\fshiel\f wipers away from the win\f-
shiel\f, they must be in the servi\be position. See your
owner’s manual.
How do I switch off the engine?01
Park the vehi\ble an\f briefly press the START/STOP
ENGINE button to swit\bh off the engine.
Pull the remote key out of the ignition slot (not ne\b-
essary on vehi\bles with keyless \frive*).

How do I use the start/stop* feature?
Auto-stop: Apply the brakes until the vehi\ble stops an\f
keep the brake pe\fal \fepresse\f.
Auto-start: Release the brake pe\fal.
The in\fi\bator light in the button on the \benter \bonsole
in\fi\bates that the fun\btion is a\btive.

02
The optional Pe\festrian an\f Cy\blist Dete\btion with
Full Auto Brake system has a feature that helps \fete\bt
pe\festrians an\f applies the brakes to help slow or stop
the vehi\ble.
This feature is \fesigne\f to be a supplementary \friving ai\f
an\f \bannot \fete\bt pe\festrians or \by\blists in all situations.
It is not inten\fe\f to repla\be the \friver’s attention an\f
ju\fgement. How does Pedestrian Detection* work?
02
Un\ferstan\fing this feat\eure is essential, see \eyour
owner’s manual for m\eore information. See a\elso the
warning on the last p\eage of this gui\fe.
If the vehi\ble \brosses a si\fe marker line or the roa\f’s
\benter \fivi\fing line, LDW will alert the \friver by provi\fing
an au\fible signal.
A\btivate LDW by pressing the button on the \benter
\bonsole.
What does Lane Departure Warning (LDW)*
do?
See the warning on the\e last page of this \egui\fe.02