engine YAMAHA VX110 2005 Owners Manual

8-2
E
HULL
HOODHANDLEBAR
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
HANDLEBAR REMOVAL
Follow the left “Step” for removal.
1 Handlebar switch coupler 2
2 Plastic tie 1
NOTE:
Fasten the buzzer lead, steering sensor
lead, start switch lead, engine shut-off
switch lead, and multifunction meter lead
with a plastic tie.
3 Corrugated tube 1
4 Grommet 1
4 5
3
4
3
7
2
FWD
6
11
6
ProCarManuals.com

8-4
E
HULL
HOODHANDLEBAR
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
HANDLEBAR DISASSEMBLY
Follow the left “Step” for disassembly.
1Bolt 2
2 Grip end 2
3Screw 2
NOTE:
Tighten the screw from the engine stop
switch side.
4 Handlebar switch assembly 1
5Screw 2
ProCarManuals.com

8-11
E
HULL
HOODENGINE HATCH COVER
ENGINE HATCH COVER
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
ENGINE HATCH COVER
REMOVALFollow the left “Step” for removal.
1 Band 1
2 Grommet 1
3 Bolt/washer/nut 4/4/4
4Bolt 4
5 Bolt 1 Deluxe model only
6 Damper stopper 1 Deluxe model only
7 Screw 2 Deluxe model only
5
10
118 7
6
2
9
4
33
34 3
1
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)5 × 14 mm
3.9 N • m (0.39 kgf • m, 2.8 ft • Ib)
5 × 16 mm
3.7 N • m (0.37 kgf • m, 2.7 ft • Ib)
3
3
3
10
7
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
4
LT
572
LT
LT
572
LT
LT
572
LT
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
LT
572
LTFWD
ProCarManuals.com

8-12
E
HULL
HOODENGINE HATCH COVER
EXPLODED DIAGRAM
Step Procedure/Part name Q’ty Service points
8 Shift lever handle 1 Deluxe model only
9 Engine hatch cover 1
10 Bolt 4
11 Multifunction meter 1
Reverse the removal steps for installation.
5
10
118 7
6
2
9
4
33
34 3
1
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)5 × 14 mm
3.9 N • m (0.39 kgf • m, 2.8 ft • Ib)
5 × 16 mm
3.7 N • m (0.37 kgf • m, 2.7 ft • Ib)
3
3
3
10
7
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
LT
572
LT
4
LT
572
LT
LT
572
LT
LT
572
LT
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
LT
572
LTFWD
ProCarManuals.com

8-13
E
HULL
HOOD
SERVICE POINTS
Damper stopper inspection (Deluxe model
only)
1. Install:
Damper stopper 1

Shift lever handle 2

NOTE:
To install the damper stopper, insert it into the
hole in the shift lever handle from the bottom,
and then slide it upward.
2
1
ENGINE HATCH COVER
ProCarManuals.com

8-14
E
HULL
HOODENGINE HATCH COVER
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
GLOVE COMPARTMENT
REMOVAL Follow the left “Step” for removal.
1 Hinge assembly 2
2Lid 1
3 Latch 1
4 Cap holder 1
5 Hood bumper 2
6Drain plug 1
Reverse the removal steps for installation.
4 3
2
1
5
56
ProCarManuals.com

8-15
E
HULL
HOOD
SERVICE POINTS
Glove compartment assembly installation
1. Install:
Hinge assembly
NOTE:
When installing the hinge assembly, make
sure that the springs are in the position shown.
ENGINE HATCH COVER
ProCarManuals.com

8-16
E
HULL
HOODSHIFT LEVER (DELUXE MODEL ONLY)
SHIFT LEVER (DELUXE MODEL ONLY)
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
SHIFT LEVER REMOVAL
Follow the left “Step” for removal.
Engine hatch cover Refer to “ENGINE HATCH COVER”.
Shift cable Refer to “REMOTE CONTROL CABLES
AND SPEED SENSOR LEAD”.
1Bolt 2
2 Detent plate 1
3 Shift lever 1
4Nut 2
5Bracket 1
Reverse the removal steps for installation.
5 43
21
6 × 18 mm
8.0 N • m (0.8 kgf • m, 5.8 ft • Ib)
4
1
LT
572
LT
LT
572
LT
15 N • m (1.5 kgf • m, 11 ft • Ib)
ProCarManuals.com

8-20
E
HULL
HOODSTEERING COLUMN
STEERING COLUMN
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
STEERING COLUMN REMOVAL
Follow the left “Step” for removal.
Engine hatch cover Refer to “ENGINE HATCH COVER”.
Steering cable end Refer to “REMOTE CONTROL CABLES
AND SPEED SENSOR LEAD”.
1Bolt 1
2 Steering arm 1
3 Joint ball 1
4Bolt 4
5 Steering column assembly 1
Reverse the removal steps for installation.
5
4
2
3 1
6.9 N • m (0.69 kgf  m, 5.0 ft  Ib)
8 × 30 mm
17 N  m (1.7 kgf  m, 12 ft  Ib)
LT
572
LT
LT
242
LT
8 × 18 mm
20 N  m (2.0 kgf  m, 14 ft  Ib)
ProCarManuals.com

8-23
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
REMOTE CONTROL CABLES AND SPEED SENSOR LEAD
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
REMOTE CONTROL CABLES
AND SPEED SENSOR LEAD
REMOVALFollow the left “Step” for removal.
Service lid 1 Refer to “FRONT HOOD”.
Seat assembly Refer to “SEAT AND HAND GRIP”.
Engine hatch cover Refer to “ENGINE HATCH COVER”.
Shift lever Refer to “SHIFT LEVER (DELUXE MODEL
ONLY)”.
1 Steering cable end 1
2Bolt 1
3Bracket 1
ProCarManuals.com