communication YAMAHA XMAX 300 2017 Owners Manual

Smart key system
3-3
3
z
Placing the smart key in the front
or rear storage compartment may
block communication between
the smart key and the vehicle. If
the rear storage compartment is
locked with the smart key inside,
the smart key system may be dis-
abled. The smart key should al-
ways be carried with you.
z When leaving the vehicle, make
sure you lock the steering and
take the smart key with you. It is
recommended that you turn the
smart key off.
EAU78623
Han dlin g of the smart key and
mechanical keys
WARNING
EWA17952
z The smart key shoul d b e carried
with you. Do not store it on the
vehicle.
z When the smart key is within
operatin g ran ge, exercise due
care because other people not
carryin g the smart key can start
the en gine an d operate the vehi-
cle.
1. Smart key
2. Mechanical key
1. Identification number card
2. Smart key (inside)
3. Identification number
12
868588
868588
1
3 2
UB74E0E0.book Page 3 Tuesday, May 2, 2017 1:04 PM

Instrument and control functions
4-10
4
TIP
If only “TCS” is displayed, there is a
communication error within the vehi-
cle. Have a Yamaha dealer check the
vehicle as soon as possible.
Averag e fuel consumption d isplay
This function calculates the average
fuel consumption since it was last re-
set.
The average fuel consumption can be
displayed as either “Consump-
tion/Average_ _._ km/L”, “Consump-
tion/Average_ _._ L/100 km” or
“Consumption/Average_ _ _._ MPG”
(for the UK). z “Consumption/Average_ _._ km/L”:
The average distance that can be
traveled on 1.0 L of fuel is shown.
z “Consumption/Average_ _._ L/100
km”: The average amount of fuel
necessary to travel 100 km is
shown.
z“Consumption/Average_ _ _._ MPG”
(for the UK): The average distance
that can be traveled on 1.0 Imp.gal
of fuel is shown.
To reset the average fuel consumption,
push the “INFO” switch for at least
three seconds.
TIP
After resetting the average fuel con-
sumption, “_ _._” will be shown until
the vehicle has traveled 1 km (0.6 mi).
Instantaneous fuel consumption
display
This function calculates the fuel con-
sumption under current riding condi-
tions.
The instantaneous fuel consumption can
be displayed as either “Consumption_
_._km/L”, “Consumption_ _._L/100 km”
or “Consumption_ _ _._MPG” (for the
UK). z “Consumption_ _._km/L”: The
distance that can be traveled on
1.0 L of fuel under the current rid-
ing conditions is shown.
z “Consumption_ _._L/100 km”: The
amount of fuel necessary to travel
100 km under the current riding
conditions is shown.
z “Consumption_ _ _._MPG” (for the
UK): The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der the current riding conditions is
shown.
1. Average fuel consumption display
1
1. Instantaneous fuel consumption display
1
UB74E0E0.book Page 10 Tuesday, May 2, 2017 1:04 PM