fog light bulb ASTON MARTIN DB AR1 Q 2003 Owners Guide

F - Owner Maintenance
1-F-42
Bulb and Fuse Replacement
A kit of replacement bulbs, fuses etc. is supplied. Any item used from the kit
should be replaced at the earliest opportunity so that the full kit is always
available.
On vehicles fitted with the space-saver spare wheel the kit is stored in the
wheel insert.
On vehicles without the spare wheel the kit is stored in the insert under the
boot floor covering. The kit contents are market dependant and typically
include:
12V, 5W (Festoon) C5W Number Plate Light
12V, 5W (capless) W5W Side Lights/Side Repeater Lights
12V, 55W H1 Headlight Main and Dip Beam
Note: From August 2002 dip beam bulbs 12V, 55W H1 Philips Blue Vision for all
countries except North America.
12V, 55W H3 Headlight/Fog light (not USA)
12V, 3W W3W Side Markers LH/RH, Front
and Rear
Fuse Extractor Key
Note: Spare bayonet fuses are located in the toolkit

F - Owner Maintenance
1-F-47
Front Indicator Lights / Front Fog Lights / Front Parking Lights
1. Using the screwdriver from the tool kit, remove three screws and remove
the lamp assembly from the front apron.
2. If preparing to replace the front fog lamp (C), release the rubber seal from
the lamp housing.
3. Turn the appropriate bulb holder (Indicator - A, Parking Lamp - B, Fog
Lamp - C) a quarter turn anticlockwise and remove it.
4. Pull the defective bulb from the bulb holder and fit the replacement
bulb.
5. Refit the bulb holder to the lamp assembly and, if necessary, refit the
rubber seal to the fog lamp
6. Refit the lamp assembly to the car and secure with three screws.