oil change ASTON MARTIN DB AR1 Q 2003 Owners Guide

B - Controls
1-B-11 External Temperature Display - Press the trip button briefly to display the
external temperature. Whilst the external temperature is displayed, press
and hold the button to change between °C and °F readouts. Briefly press the
button again to return to the trip display.
Gearshift Indicator (centre top)
Indicates the current gearshift mode on DB AR1 fitted
with 'Touchtronic' transmission. 'A' indicates Automatic
mode. A number 1-5 indicates the current gear selected
when in Touchtronic mode.
Speedometer (centre right)
Indicates the vehicle speed in miles per hour and/or kilometres per hour.
Also houses the odometer recording the total distance travelled by the
vehicle.
Oil Pressure Gauge (top right)
The oil pressure gauge is graduated in bar (1 bar 14.7 psi). Normal oil
pressure at medium engine revs should be in the range 3-6 bar.
Engine Coolant Temperture Gauge (bottom right)
In temperate climates, normal coolant temperature is indicated with the
needle to the left of the 'N' position, but coolant temperature will vary
(within the range 92 - 105°C) dependent on ambient temperature and
driving conditions.

F - Owner Maintenance
1-F-5
Dangerous Substances
WARNING: Many liquids and other substances used in motor vehicles are
poisonous and should under no circumstances be consumed and should, so far
as possible, be kept from contact with the skin. These substances include battery
electrolyte, antifreeze, oil, brake and clutch fluid, petrol, windscreen washer
additives, lubricants, refrigerant and various adhesives. Particular care should
be taken to avoid unnecessary contact with used engine oil. Always read carefully
the instructions printed on labels or stamped on components and follow them
carefully. Such instructions are included for reasons of your health and personal
safety. Never disregard them. Dangerous substances should be kept out of reach
of children.
Engine Oils
WARNING: Prolonged and repeated contact with used engine oils can cause
serious skin disorders, including dermatitis and cancer. Avoid excessive contact,
wash thoroughly after contact. Keep out of reach of children. When your oil is
changed, be sure that it is done by an experienced person. In addition, observe
all laws regarding the disposal of waste oil and toxic fluids.
Protect The Environment
WARNING: It is illegal to pollute drains, water courses, or soil. Use authorised
waste disposal facilities, including civic amenity sites and garages providing
facilities for receipt of used oil. If in doubt, contact your local authority for advice.
Fuel Tank Filling
WARNING: Petrol is highly flammable and, in confined spaces, is also explosive
and toxic. In the event of spillage, switch off the engine, use no naked flame or
light. Do not smoke. Do not inhale fumes.

A - Service Schedules
2-A-4
Service Schedules Summary
Your DB AR1 should be serviced every 12,000 km (7,500 miles) or 6 months,
whichever occurs first. The service schedules cover:
Pre-delivery Inspection (PDI)
This free series of checks is carried out on the car by the Selling Dealer before
delivery. The checks ensure that you receive a vehicle which matches the high
quality standards set by Aston Martin Lagonda Limited.
Initial 1,500km (1,000 mile) Service
The Selling Dealer is responsible for the costs and work involved in performing this
free service. The initial service consists of an inspection and oil change service after
completion of the first 1,500 km (1,000 miles) and includes fine adjustments to
compensate for initial 'bedding-in' e.g. handbrake adjustment. Also, engine oil and
filter will be changed to clear any contaminants picked up during the initial running.
12,000 km (7,500 mile) Service
This is the basic service interval for DB AR1 when consumable oils, filters, etc will be
changed and functional checks will be carried out on all major systems in the vehicle.
24,000 km (15,000 mile) Service
In addition to the 12,000 km (7,500 mile) service items, air filters, wiper blades etc.
are renewed at 24,000 km (15,000 mile) intervals.
48,000 & 96,000 km (30,000 & 60,000 mile) Services
Again the basic 12,000 km (7,500 mile) service is carried out together with the
additional checks and replacement items shown in the following schedules.
2 Years
To maintain the hydraulic brake system performance, the brake fluid is renewed
every 2 years to clear the system of absorbed water vapour.