AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owner's Guide

AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owner's Guide A3 1995 8L / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/951/w960_951-0.png AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owner's Guide

Page 31 of 35

AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owners Guide 26-24
      
Exhaust system, aligning free of stress
 
     
Align exhaust system when cold 
     
Front-wheel-drive vehicles  
     
-  Remove double clamp bolts   Page 26
-2 , item 
2 . 
    
Aligni

Page 32 of 35

AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owners Guide 26-25
      
All-wheel-drive vehicleswithout double clamp 
between front and rear mufflers  
     
-  Remove double clamp bolts   Page 26
-9 , item 
- 12 -. 
    
Aligning tailpipes:  -  Push exhaust

Page 33 of 35

AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owners Guide 26-26
      
All-wheel-drive vehicleswith double clamp 
between front and rear mufflers  
     
Note:  
     Only for vehicles with double clamp between 
front and rear mufflers: also align front muff

Page 34 of 35

AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owners Guide 26-27
 
    
Aligning tailpipes:  -  Push exhaust system forward (arrow) until initial preload on right-rear 
mount equals dimension -a-. 
   Dimension -a- = 7-11 mm (0.275-0.433 in.)
-  Tighten rear

Page 35 of 35

AUDI A3 1995 8L / 1.G AEB ATW Engines Exhaust System Components Owners Guide 26-28
      
Exhaust system, checking for leaks
 
     
-  Start engine and run at idle.
     
-  Seal tailpipes with cloths or equivalent for 
duration of leak test. 
     
-  Listen for leaks at fol
Page:   < prev 1-10 11-20 21-30 31-40