ECO mode AUDI A3 1996 8L / 1.G ATW Engine Output Diagnostic Test Mode Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1996, Model line: A3, Model: AUDI A3 1996 8L / 1.GPages: 12, PDF Size: 0.04 MB
Page 1 of 12

01-49
 
     
Output Diagnostic Test Mode 
(DTM) (function 03) 
     
Note:  
     
Output Diagnostic Test Mode (DTM) is only 
possible with engine idle and ignition switched 
on. 
     The electric Fuel Pump (FP) runs during all of 
output Diagnostic Test Mode (DTM). 
     In output Diagnostic Test Mode (DTM), 
individual actuators (with the exception of the 
fuel injectors) are activated for approximately 1 
minute unless the next actuator is selected 
earlier by pressing the  button. 
     
Actuators are checked either acoustically or by 
touch. 
     Output Diagnostic Test Mode (DTM) is aborted 
if engine is started or an RPM signal is 
recognized. 
     Before re-initiating output Diagnostic Test Mode 
(DTM), engine must be started and the ignition 
must be switched off and on again. 
Pa
ge 1 of 12 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.4 
Page 2 of 12

01-50
       Output Diagnostic Test Mode (DTM) activates 
the following components in the specified 
sequence:  
     
Activation sequence  
1   Evaporative Emission (EVAP) canister purge 
regulator valve -N80-  
2   Secondary Air Injection (AIR) solenoid valve 
-N112-  
3   Secondary Air Injection (AIR) pump relay -
J299-  
4   Wastegate bypass regulator valve -N75-  
5   Leak Detection Pump (LDP) tank ventilation 
system  
6   Recirculating valve for turbocharger -N249-  
7   Cylinder 1 fuel injector -N30-  
8   Cylinder 3 fuel injector -N32-  
9   Cylinder 4 fuel injector -N33-  
10   Cylinder 2 fuel injector -N31-  
     
Test requirement:  
     
Fuses for engine electronics OK 
     
Pa
ge 2 of 12 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.4 
Page 5 of 12

01-52
 
Output Diagnostic Test Mode (DTM) Evap. canister pur
ge re
gulator valve
    
Indicated on display:(or, indicated: tank ventilation valve -N80-)  
If valve is not activated (does not click):  
Activating the Secondary Air Injection (AIR) solenoid valve  
This valve is activated for approx. 1 minute (clicks), unless  button is 
pressed first to switch to the next actuator. 
-  Check Evaporative Emission (EVAP) canister purge regulator valve -
N80-  Page 24
-107
 . 
- 
Press button.
Output Diagnostic Test Mode (DTM) Secondar
y Air In
jection solenoid valve
    
Indicated on display  
If valve is not activated (does not click):  
 Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo Engine Mechanical, Engine 
Code(s): AEB, ATW, Repair Group 26; Checking Secondary Air Injection (AIR) system
   
This valve is activated for approx. 1 minute (clicks), unless  button is 
pressed first to switch to the next actuator. 
-  Check Secondary Air Injection (AIR) solenoid valve -N112-:
Pa
ge 5 of 12 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.4 
Page 6 of 12

01-53
      
Activating the Secondary Air Injection (AIR) 
pump relay  
     
- 
Press button.Output Diagnostic Test Mode (DTM) Secondary Air Injection pump relay
    
Indicated on display  
If the Secondary Air Injection (AIR) pump motor does not start up in 
intervals:  
 Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo Engine Mechanical, Engine 
Code(s): AEB, ATW, Repair Group 26; Checking Secondary Air Injection (AIR) system
   
Activating wastegate bypass regulator valve -N75-  
The Secondary Air Injection (AIR) pump relay -J299- (in 3-socket relay 
carrier in the E-box, at left in the plenum chamber , position 2) 
switches the Secondary Air Injection (AIR) pump motor -V101- on for 
approx. 1 minute and off in intervals unless the next actuator is 
selected first by pressing the   button. 
-  Check Secondary Air Injection (AIR) pump relay -J299-:- 
Press button.
Output Diagnostic Test Mode (DTM) Waste
gate b
ypass re
gulator valve -N75-
    
Indicated on display  
This valve is activated for approx. 1 minute (clicks), unless button is 
pressed first to switch to the next actuator. 
Pa
ge 6 of 12 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.4