ignition AUDI A3 CABRIOLET 2016 Workshop Manual

Child safet y
-If you must install a booster seat on the
front passenger seat because of exceptional
circumstances the
P ASSENGER AIR BAG
OFF
light must come on and stay on, when­
ever the ignition is switched on.
- If the PASSENGER AIR BAG OFF light does
not come on and stay on, perform the
checks descr ibed
~ page 155, Monitoring
the Advanced Airbag System.
- Take the ch ild restraint off the front passen­
ger seat and install it p roperly at one of the
rea r seat positions if the
PA SSENGER AIR
BAG OFF
l ight does not stay on whenever
the ignition is switched on.
- Always read and heed all WARN INGS when­
ever using a child restrained in a veh icle is
being used~
page 135, Safety belts,
~ page 143, Airbag system and
~page 165, Important information.
Securing child seats
Securing a child safety seat using a safety
belt
---
Safety belts for the rear seats and the front pas­
senger can be locked with the convertible locking
retractor to properly secure child safety seats .
The safety belts emergency locking retractors for
the rear seats safety belts and for the front pas­
senger's seat safety belt have a convertib le lock­
i n g ret rac to r fo r child rest raints . The safety belt
m ust be locked so that belt webbing cannot un­
reel. The retractor can be activated to lock the
safety belt and prevent the safety belt webbing
from loosening up during normal driving. A child
safety seat can only be properly installed when
the safety belt is locked so that the child and
chi ld safety seat w ill stay in place .
A lways remember: Even though your vehicle is
equ ipped w ith an Advanced Airbag system, all
children, especially those 12 years and younger,
should always ride in the back seat properly re­
stra ined for their age and size .
176
A WARNING ,.
Improperly installed child safety seats in-
crease the r isk of serious personal injury and
death in a collision.
-
- Always make sure that the safety be lt re­
tractor is locked when installing a ch ild
safety seat . An unlocked safety be lt retrac­
tor cannot hold the ch ild safety seat in place
during normal d riving or in a c rash.
- Always buckle the child safety seat firmly in
place even if a ch ild is not si tting in it. A
loose child safety seat can fly a round dur ing
a sudden s top or in a collision.
- I f the backrest is not se curely latched, the
child and the ch ild restraint will be thrown
forward together with the backrest and w ill
strike parts of the veh icle interior. The child
can be seriously injured or killed.
- Never install rear -facing child safety seats
or infant carriers on the front passenger
seat. A child w ill be seriously injured and
can be k illed when the passenger a irbag in­
flates.
- The inflating airbag will h it the ch ild safety
seat or infant carr ier with great force and
w ill smash the child safety seat and child
aga inst the backrest, center armrest, door
or roof.
- Always install rear-fac ing ch ild safety seats
or infant carriers on the rear seat .
- Forward-facing child safety seats or infant
carriers installed on the front passenger's
seat may interfere w ith the deployment of
the airbag and ca use serio us inju ry to the
child.
- It is safer to install a forward-facing child
safety seat on the rear seat.
- Always read and heed all WARNINGS when­
eve r us ing a child restrained in a vehicle is
be ing used
c::!;> page 165. Special p recautions
apply when installing a child safety seat on
the front passenger seat~
page 144, Child
restraints on the front seat -some impor-
tant things to know .
~

<( co .... N ,.__
N .... 0 ,.__
> co
A WARNING 1=
Always take special precautions if you must install a forward or rearward -facing ch ild re ­
straint on the front passenger's seat in excep­
tional situations:
- Whenever a forward or rearward -facing
child restraint is installed on the front pas­
senger seat, the
P ASSENGER AIR BAG OFF
light must come on and stay on whenever
the ignition is switched on .
- If the
PA SSENGER AIR BAG OFF light does
not come on and stay on , perform the
checks descr ibed
~ page 155, Monitoring
the Advanced Airbag System.
- T ake the ch ild restraint off the front passen­
ger seat and install it p roperly at one of the
rear seat positions if the
PAS SEN GER AI R
BAG OF F
light does not stay on whenever
the ignition is switched on.
- Improper installation of ch ild restraints can
reduce their effectiveness or even prevent
them from providing any protection .
- An improper ly installed child restraint can
interfere with the airbag as it deploys and
seriously injure or even kill the child .
- Always carefu lly follow the manufacturer's
instructions provided with the child safety
seat or carrier.
- After checking to make sure that the child restra int is properly installed, make certa in
tha t the child restraint is correctly recog­
nized by the capacit ive passenger detection
system in the front passenger seat and that
the
PASSENGER AIR BAG OFF light signals
the cor rect front passenger fronta l airbag
status .
A WARNING
Forward-fac ing child rest raints :
- Always ma ke sure the forward-fac ing seat
has been designed and ce rtified by its man­
ufacturer for use on a fron t seat with a pas­
senger front and s ide a irbag .
- Never put the forward-facing child restraint
up, against or very near the instrument pan­
el.
-
Ch ild safety
-Always move the front passenger seat to
the highest posit ion in the up and down ad­
justment range and move it back to the rearmost posit ion in the seat's fore and aft
ad justment range, as far away from the a ir­
bag as possible , before installing the for­
ward-facing ch ild restraint.
- Always make sure that the safety belt upper
anchorage is behind the ch ild rest raint and
not next to o r in front of the child restraint
so that the safety be lt will be p roperly posi­
tioned.
- Ma ke sure that the
PASSENGER AIR BAG
OFF
li ght comes on and stays on a ll the time
whenever the ignit ion is switched on .
A WARNING
= Rearward-facing chi ld restraints:
- A child in a rearward-fac ing c hild safety sea t
installed on the front passenger seat will be
serio usly injured and can be ki lled if the
front airbag inflates -even with an Ad­
vanced Airbag System .
- The inflating airbag will hit the c hild safety
seat or infant carr ier with great force and
will smash the child safety seat and child
aga inst the backrest, center armrest, door
or roof.
- Always be especially carefu l if you must in­
stall a rearward facing child safety seat on
the front passenger seat in except ional cir­
cumstances.
- Make sure that the
PASSENGER AIR BAG
OFF
light comes on and stays on all the time
whenever the ignit ion is switched on .
- If the
PA SSENGER AIR BAG OFF light does
not come on and stay on, immediately in­
stall the rea r-facing child safety seat in a
rear seating posit ion and have the airbag
sys tem inspected by you r Audi dealer.
Activating the convertible locking retractor
Use the convertible locking retractor to secure a
child restraint.
Always heed the c hild safety seat manufacturer 's
instruct ions when installing a child restraint in
177

<( co ..... N
" N ..... 0 r--. > 00
-If the fuel container is made of metal, the
fuel nozzle must always be in contact with
the container when filling it with fuel. This
prevents static electricity from discharg­
ing.
- Never spill fuel in the vehicle or the lug­
gage compartment . Evaporated fuel is ex­
plosive and increases the risk of serious in­
jury or death.
- Follow legal requirements when using,
storing and transporting fuel containers .
- Make sure the fuel container conforms to industry standards (ANSI/ASTM F852-86).
(D Note
-Remove spilled fuel from vehicle paint im­
mediately, because it can damage paint.
- Never drive until the fuel tank is completely
empty . The irregular supply of fuel that re­
sults from that can cause engine misfires. Uncombusted fuel will enter the exhaust
system and increase the risk of damage to
the catalytic converter.
@) For the sake of the environment
If the fuel nozzle is used correctly, it will ind i­
cate that the tank is full the first time it
sw itches off automatically. Do not try to add
more fuel, because it can spill over. Also, the
expansion space in the tank will fill, which can
result in fuel spilling out when it becomes
warm and polluting the environment.
@ Tips
Fuel can age and may lead to problems when
starting . Audi recommends replacing the fuel
in your vehicle within six months.
@ Tips
- If the engine is running while fueling, va­
pors can escape or the fuel can spill over.
Because of th is, the fuel nozzle switches off
before the tank is full.
- Do not fue l the vehicle when the ignition is
switched on . Otherwise, the fuel gauge may
not show the correct level after fueling the
vehicle.
Checking and Filling
-The fuel filler door on your vehicle does not
lock when you lock the vehicle from the in­
side.
Fuel filler door emergency release
If the central locking system is faulty, the fuel
filler door can be unlocked manually.
Fig. 158 Rear of the vehicle: right rea r seat fo lded fo rward
The emergency release is located behind the
right rear seat.
The pull cable for the emergency release is locat­ ed on the cover .
.. Remove the cover from the trim .
.. Pull on the cover carefully
c:> fig. 158. The tab
on the cover must point forward in the direc­
tion you are pulling when pulling on the cover .
"' To open the fuel filler door, press on the left
side
c:> page 186, fig . 156 .
(D Note
Only pu ll on the cover until you feel resist­
ance. You will not hear it release. Otherwise
you could damage the emergency re lease
mechanism.
Catalytic converter
Applies to: vehicles with gasoline engine
It is very important that your emission control
system (catalytic converter) is functioning prop­
erly to ensure that your vehicle is running in an
environmentally sound manner.
.. Always use lead-free gasoline c:> page 184, Gas­
oline grade .
.. Never run the tank down all the way to empty. ~
187

Checking and Filling
"'Never put too much motor oil in your engine
¢ page 193 , Checking the engin e oil lev el and
adding oil.
"'Never try to push- or tow-star t your vehicle.
The catalytic converter is an efficient "clean-up"
device built into the exhaust system of the v ehi­
cle. The catalytic converter burns many of the pollutants in the exhaust gas before they are re­
leased into the atmosphere .
The exclusive use of unleaded fuel is critically im­
portant for the life of the catalytic converter and
proper functioning of the engine.
A WARNING
The temperature of the exhaust system is
high, both when driving and after stopping
the engine.
-
- Never touch the exhaust tail pipes once they
have become hot . This could result in burns .
- Do not park or operate the vehicle in areas
where the hot exhaust system may come in
contact with dry grass, brush , fuel spill or
other material which can cause a fire.
- Do not apply additional undercoating or
rustproofing on or near the exhaust mani­
fold, exhaust pipes, catalytic converter or heat shields. During driving, the substance
used for undercoating could overheat and
cause a fire.
(D Note
- Be aware that just one tank filling with
leaded fuel will already seriously degrade
the performance of the catalytic converter.
- Do not exceed the correct engine oil level
¢page 193.
-Do not drive until the fuel tank becomes
completely empty. The engine could mis­
fire. Unburned fuel could also get into the
exhaust system and this could cause the
catalytic converter to overheat.
- Do not switch off the ignition while the vehi­
cle is moving.
- Do not continue to operate your vehicle un­
der these conditions, as otherwise fuel can reach the catalytic converter. This could re-
188
sult in overheating of the converter, requir­
ing its replacement.
- To assure efficient operation of the Emis­
sion Control System:
- Have your vehicle maintained properly and
in accordance with the service recommen­
dations in your Warranty
& Maintenance
booklet.
- Lack of proper maintenance as well as im­
proper use of the vehicle will impair the
function of the emission control system
and could lead to damage.
@ For the sake of the environment
Even when the Emission Control System is op­
erating properly, the exhaust gas can have a
sulfur-like exhaust gas smell under some op­
erating states. This depends on the sulfur
content of the fuel being used. Using a differ­
ent brand of fuel may help, or filling the tank
with lead-free super grade gasoline.
Engine compartment
Working in the engine compartment
Special care is required if you are working in the
engine compartment
For work in the engine compartment, such as
checking and filling fluids, there is a risk of in­
jury, scalding, accidents, and burns. For this
reason, follow all the following listed warnings
and general safety precautions. The engine
compartment is a dangerous area.
£:=? &. -
A WARNING
To reduce the risk of injuries, complete the
following steps before opening the hood:
- Turn the engine off.
- Switch the ignition off.
- Set the parking brake.
- Place the selector lever in the P position .
- Let the engine cool down .
- Never open the hood when you see that
steam or coolant drips from the engine
compartment- there is a danger of burns!
Wait until no steam or coolant flows out .
-

<( co .... N ,.__
N .... 0 ,.__
> co
-Keep children away from the engine com­
partment.
- Never spill fluids on a hot engine. These flu­
ids (such as the freeze protection contained
in the coolant) can catch fire .
- Avoid short circuits in the e lectrical system,
especially the battery.
- When working in the engine compartment,
remember that the radiator fan can switch
on even if the ignition is switched off, which
increases the risk of personal injury.
- Never open the cap on the coolant expan­
sion tank when the engine is warm. The
cooling system is under pressure.
- To protect your face, hands, and arms from
hot steam or coolant, cover the cap with a
large cloth when opening.
- Do not remove the engine cover under any
circumstances . This increases the risk of
burns.
- If tests need to be performed w ith the en­
gine running, there is additional danger due
to moving components (such as the ribbed
belt, alternator and radiator fan) and from
t he high vo ltage ig nition system.
- Never reach into the radiator fan . The e lec­
t ric a uxiliary fan is cont rolled by tempera­
t ur e and can switch on sudde nly.
- Pay atte ntion to the fo llow ing warnings list­
ed when wo rk on the fuel system or on t he
ele ct rical eq uipment is requ ired.
- Always d isconnect the ve hicle battery
from the vehicle electrical system
- Do not smoke
- Never work near open flames
- Always have a working fire ex tinguisher
nearby
- T o red uce the risk of e lec tric shoc k and in­
jury, neve r touch the followi ng components
when the eng ine is r unning or is being star t­
ed :
- Ignition cable
- Other components in the electronic high
voltage ignition system
- If you must check or perform work on the
engine while it is runn ing:
Ch eck ing and Filling
-Set the parking brake and place the selec­
tor lever in the P (park) posit ion first.
- Always proceed with extreme caution so
that clothing, jewelry or long hair do not become caught in the radiator fan, fan
belt or other moving components or do
not come into con tact with ho t compo­
nen ts . Tie bac k long hair befo re beginn ing
work and do not wea r clothing that can
hang down into t he engine.
- Lim it yo ur exposure to exhaust and chemi­
cals to as short a time as possible
~ .&. .
&_ WARNING
Ca lifo rnia Proposition 65 Warning:
- E ngine exhaust, some of its const ituents,
and certa in vehicle components conta in or
emit chemi cals know n to the State of Cali ­
forni a to ca use cance r and birth defects and
reproductive harm. In add ition, cert ain flu ­
ids contained in vehicles and certain prod­
ucts of component wea r contain or em it
chemicals known to the State o f Californ ia
to cause cancer and birth defects or other reproductive harm .
- Battery posts, term inals and related acces­
sories contain lead and lead compounds,
chemicals know n to the State of Californ ia
to cause cancer and reproductive harms .
Wash hands afte r handling .
(D Note
When filling fluids, be sure not to m ix the f lu­
i ds up. Otherwise severe malfunctions and en­
gine damage will occur .
@) For the sake of the environment
You should regularly check the ground under
your vehicle i n order to detect leaks quic kly. If
the re are visible spots from o il or other fluids,
bring your veh icle to an authorized Audi deal­
er o r autho rize d Aud i Serv ice Facility to be
chec ke d .
189

<( co ..... N
" N ..... 0 r--. > 00
-Always dispose of used engine oil prope rly .
Do not dump it on garden soi l, wooded
areas, into open streams or down sewage
drains.
- Recycle used engine oil by taking it to a used
engine oil collection facility in your area, or
contact a serv ice stat ion.
Cooling system
Coolant
The engine coo ling system is filled wi th a mixture
of purified water and coolant additive at the fac ­
tory. This coo lant must not be not changed.
The coolant leve l is moni to red throug h the . in ­
d icator light
q page 16 . Howeve r, we do recom­
mend occasiona lly checking the coo lant level
manually.
If you m ust add coo lant, use a m ix ture of water
an d coolant addit ive. Mixing the coolant additive
with d isti lled water is recommended.
Coolant additive
The coolan t additive is made of anti-freezing and
corros ion pro tection agents. Only use the fol low­
in g coolant add it ives. The se addi tives may be
mixed wit h each other.
Coolant additive Specification
G13 TL 7
74)
G12 ++ TL 774 G
T he amount of coo lant additive that needs to be
mixed with water depends on the climate where
the vehicle will be ope rated. If the coolant addi­
tive percentage is too low, the coolant can freeze
and damage the eng ine.
Coolant Freeze protec-
additive tion
Warm reg ions min . 40% m in. -13 °F
max. 45% (-
25
°()
Cold regions min . 50% max . -40 °F
max. 55% (-40
°()
Checking and Filling
(D Note
-
Before the start of w inte r, have you r auth or­
ized Aud i dealer or a uthorized Aud i Serv ice
Facility check if the coolant addit ive in your
vehicle matches the pe rcentage appropriate
for the climate. This is especially important
when driving in colder climates .
- If the appropr iate coo lant add itive is not
availab le in an emergency, do not add any
other additive. Yo u could damage the en­
gine. If this happens, on ly use water and re­
store t he corre ct m ix tu re ratio with the
specified coolant ad ditive as soon as poss i­
ble.
- O nly refill w ith new coolant.
- Radiator sea lant must not be mi xed with
the coolant.
Adding coolant
Fig . 1 64 En g in e compa rtment: ma rki ngs o n the coolant
expans ion
t ank
Read and follow the WARNINGS befo re check­
ing anything in the engine compartment
i=> page 188, Working in the engine compart­
ment.
Che cking the engine coolant level
.. Park your vehicle on a leve l su rface .
.. Switch t he ignition off .
.. Read the coolant level on the coolant expansion
tank ¢
fig. 164. The coolant level must be be­
tween the markings when the eng ine in cold .
When the eng ine is warm it can be slig htly
above the upper marking.
195

Check ing and F illing
@ For the sake of the environment
Because of the prob lem of proper disposal of
brake fluid as we ll as the special tools re­
quired and the necessary expertise, we rec­
ommend that you have the b rake fluid
changed by your author ized Audi dealer .
Battery ( 12 V)
General information
All work on the battery requires expert knowl­
edge .
Read and follow the WARNINGS
before check­
i n g a nyth ing in the engine compartment
c::> page 188, Working in the engine compart­
ment.
The batte ry in you r Aud i does not need any main­
tena nce unde r
normal operating cond itions. A udi
re commends hav ing the e lectro lyte level check
by an au thor ized A udi dealer or au thori ze d Audi
Serv ice Facility when there a re
high outs ide tem ­
peratures or when driving a ll day. The elect rolyte
level sho uld a lso be checked each time the bat­
tery is charged
c::> page 200.
Have the battery checked when you bring your ve ­
hicle in for an inspection. It is a good idea to re­
p lace the battery if it is more than 5 years old .
T he batte ry is located in the eng ine compar tment
and is practically
maintenance-free .
Disconnecting the battery terminals
The battery shou ld not be d isconnected. Severa l
veh icle functions (power w indows, for example)
w ill be lost w hen the b attery is disconne cted. The
f u nctions mus t be reprog rammed after connect­
in g the battery. To avo id th is, the battery shou ld
only be disconn ecte d from the vehicle e lectrica l
system when it is abso lutely necessary.
T o reprogram the func tions, proceed as follows:
198
Function Reprogramming
Power window one-c::> page 35, Correcting
touch up/down func-power window malfunc-
tion tions
Remote control key o r If the vehicle does no t
Convenience key react to the key, it must
be synchronized
c::> page29
Dig ita l cl ock c::>page 10
ESC indicator light The ind icator light goes
o ut after driving a few
meters
Not running the vehicle for long period s of
time
If you do not drive your vehicle for severa l days o r
weeks, electrical components are gradually re­ d u ced or switched off . This reduces energy con­
s u mp tion and mai ntain s the vehicle's ability to
st art over a long perio d of time
c::> page 1 21.
Some conven ien ce f unctions, such as inter ior
li ght ing o r power seats* may not wor k. T hese
convenience functions will be availab le aga in
once you sw itch the ignition on and start the en­
gine.
Winter operation
D ur ing the winte r mon ths, it is common for the
batte ry capac ity to decrease as the temperatures
become lower . This is because more power is
needed to start the vehicle and components such
as the headlights and the rear window defogger
a re used more freque ntly .
Avoid using power unnecessa rily, espec ia lly in
c ity dr iving o r on short t rips. Have your author­
i z ed Audi dealer or author iz ed Audi Se rvice Facili­
ty check the battery capacity be fore the start of
winter
c::> page 200 . A well -cha rged battery will
not only reduce sta rting prob lems in cold wea th­
e r, bu t it will a lso l ast longer.
.&_ WARNING
- W ork on the b attery requires e xper t knowl­
e d ge. Con tact an a uthor ized Audi dealer or
author ized Audi Se rvice Facility for info rma ­
tion rega rding the vehicle batte ry. There is a
-
ris k for chemical burns or e xplosions . ..,.

Check ing and F illing
with all environmental regulations. D isposing
of vehicle batteries improperly is very danger­
ous to the env ironment .
Windshield washer
system
F ig. 16 7 Engin e co mpartment : washer fluid reservoir cap
"' N
-N
" 0:, lD
The washer flu id reservoir§ contains the wind­
shie ld wash er fluid
¢ page 191, fig. 161. The res­
ervoir capacity is found in
9 page 251.
.. Read and follow a ll WARNINGS before wo rking
in the engine compartment ¢
page 188, Work­
ing in the engine compartment.
.. Open the cap .
.. Add the washer fluid and close the cap .
To reduce the risk of lime sca le deposits on the
spray nozzles, use clean water w ith low amounts
of calc ium . A lways add window cleaner to the wa­
t er. When the outs ide temperatures are co ld, an
anti-freezing agent should be added to the water
so that it does not freeze .
(D Note
-The concentration of anti-freezing agent
must be ad justed to the vehicle operating
cond itions in the respect ive climate . A con­
ce ntration that is too high can lead to veh i­
cle damage.
- Neve r add rad iator ant i-freeze or ot her addi­
tives to the washe r fl uid .
- Do not use a glass cleaner that conta ins
paint solvents, beca use this cou ld damage
the pa int.
202
Service interval display
T he service interval display detects when your ve­
hicle is due for service.
The service interval display works in two stages :
-Inspe cti on or oil change reminder: afte r a cer-
tain dis tan ce dr ive n, a message appears in the
instrument cluster display each t ime the igni ­
tion is switched on or off . The remaining dis­
tance or tim e is disp layed briefly.
- Inspection or oil change due : if your vehicl e
has reached an inspection or oil change inte rval
or both intervals at the same t ime, the mes­
sage
Inspection due! or Oil change due! or Oil
change and inspection d ue!
appears briefly af­
ter switching the ignition on/off.
Check ing ser vice inter vals
You can check the remaining d istance or t ime un­
ti l the next oi l change or next inspection in the
MMI. Select the
i MENU I button> Car> Systems *
control button > Ser vice & control > Service in ­
tervals .
Resetting the indic ator
Your a uthorized Audi dea ler or authorized Audi
Service Facility w ill reset the service interva l dis­
play after perform ing service .
If you perform an o il change yourse lf to the Audi
specifications, you must reset the service interval
display .
To rese t the disp lay, select the
I MENU I but ton>
Car > Systems * control button > Service & con­
t rol > Service inter vals > Re set oil change inter ·
val.
(D Note
- Only reset the oil c hange indicator if the oi l
was changed .
- Following the service in terva ls is cr itica l to
mainta ining the se rvice life and val ue of
your vehicle, especially the engine. Even if
the mileage on the ve hicle is low, do not ex­
ceed the time for the next service.
- Calculat ing the time to the next oil change
is inte rrupted when the vehicle battery is

<( co .... N r--­N .... 0 r--­> co
Indicat or lights
IE -Loss of pressure in at least one ti re c::> ,& .
Check the tires and replace or repair if necessary.
Check/correct the pressures of all four tires. Then
store the tire pressures in the MMI
<=:>page 223.
mm (T ire Pressure Monitoring System) Tire
press ure: System malfuncti on!.
Ifm appears
after switching the ignition on or whi le driving
and the
IE indicator light in the instrument clus­
ter blinks for approximately one minute and then
stays on, there is system malfunction . Try to
store the correct tire pressures
c::> page 223 . If
the indicator light does not turn off or turns on
again after a short period of time, drive to an au­
thor ized Audi dealer or authorized Audi Service
Faci lity immediately to have the malfunction cor­
rected.
A WARNING
- If the tire pressure warning light IE in the
instrument cluster turns on, the pressure in
one or more tires is too low . Reduce the ve­
hicle speed immediately and avo id any hard
steering or braking maneuvers. Stop as soon as possible, check the tire and inflate the
t ire to the correct pressure, which is speci­
fied on the tire pressure label on the veh icle
<=:> page 214. Driving w ith a t ire with low
pressure c auses the t ire to overheat and can
result in failure of the tire . Low pressure can
also have a negative effect on the driving
and braking behavior of the vehicle .
- T he driver is responsib le for maintaining the
correct tire pressures . You must check the
tire pressures regularly .
- Under certain conditions (such as a sporty
driv ing style, winter conditions or unpaved
roads), the pressure monitor indicator may
be delayed.
- Do not use run-flat tires on your vehicle . Us­
ing them when not permitted can lead to
vehicle damage or accidents .
(D Tips
-The tire pressure monitoring system can al ­
so stop working when there is an ESC mal­
function.
Tir es and wheel s
- Us ing snow chains may result in a system
ma lfunction.
- The tires with the identification "AO" or
"RO"
c::> page 211 have been matched with
your Audi tire pressure monitoring system .
We recommend that you use these tires.
- The tire pressure monitoring system can on­
ly monitor the tire pressure of the driving
tires. Check the tire pressure of the spare
wheel in the luggage compartment so that if necessary it is ready for use.
Storing tire pressures
App lies to : vehicles wi th Tir e Pressure Mo nito rin g Sys te m in­
dic ator
A change in tire pressur e or a change in tires
must be stored in the syst em .
The tire press ure is stored in the MM I.
.,. Make sure before storing that the t ire pressures
of all four tires meet the specified values and
are adap ted to the load. O therwise the system
could malfunction
c::> page 214.
.. Switch on the ignition.
.,. Select: the I MENU I button> Ca r> Sys tem s*
con trol button > S er vice & control > Tire pre s­
s u re m on itor > Stor e tire pressu re > Yes , sto re
no w.
(D Tips
Do not store the tire pressures if snow chains
are installed. Otherw ise the system could
malfunction.
223

<( co .... N ,.__
N .... 0 ,.__
> co
A WARNING
-Only wash the vehicle when the ignition is
off and follow the instructions from the car
wash operator to reduce the risk of acci­ dents.
- To reduce the risk of cuts, protect yourself from sha rp metal components when wash­
ing the underbody or the inside of the wheel
housings.
- After washing the vehicle, the bra king effect
may be de layed due to mo isture on the
bra ke rotors or i ce in the w inte r. The brake s
must be dried fi rst w ith a few care ful brake
applications .
Q) Note
-If yo u wash t he vehi cle in an au toma tic car
wash, yo u m ust fold the exte rior m irrors i n
to re duce the risk of damage to the mirrors .
Power folding exterior m irrors * must on ly
be fo lded in and out using the power folding
funct ion.
- To p revent paint damage, do not wash the
vehicle in d irect sunlight.
Ca re and cleaning
- To re duce the risk of damage, do not wash
the power top with a pressure washer .
- T o red uce the risk of damage to the surface,
do not use insect removing sponges, kitche n
sponges o r similar items .
- M atte finish painted veh icle components:
- To reduce the risk of damage to the sur-
face, do not use polishing agents or hard
wax.
- Never use protective wax. It can destroy
the matte finish effect.
- Do not place any stickers or magnetic
signs on vehicle parts painted with matte
finish paint. The paint could be damaged
when the stickers or magnets are re­
moved.
@ For the sake of the environment
Only wash t he veh icle in facili ties s pec ially de­
s igned for that pu rpose. This will reduce the
r isk of dirty wate r contamina ted with o il from
ente ring the sewe r sys tem.
Cleaning and care information
When cleaning and caring for individua l vehicle
components, refer to the follow ing tables . The
information contained there is simp ly recom­
mendations. For quest ions or for components t
h at are not listed, cons ult an authorize d Audi
dealer or authorized Audi Service Fac ility . Also
f o llow the information found in c> ,& .
Exterior cleaning
Component Situation Solution
Windshield wiper
Deposits <=> page 50 , Cleaning windshield wiper blades
blades
Headlights /
Deposits So
ft sponge with a mild soap solutiona)
Tail light s
Sensors /
Deposits Sensors: soft cloth w it h solvent-free cleani ng solut io n
Camera len ses Camera lenses: soft clot h w ith alcoho l-free cleaning sol u-
tion
Snow/ice Hand br ush/solvent-free de-icing spray
Wheels Road salt Water
Brake dust Acid-free special cleaning solution
Exhaust tail pipe s Road salt Wate
r, clean ing so lution su itab le for s tainless stee l, if ne e-
essa ry
225