AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual https://www.carmanualsonline.info/img/6/1244/w960_1244-0.png AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual

Page 1 of 5

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual 35-17
 
     
Input shaft, adjusting 
     
Note:  
     The input shaft must be re-adjusted if the 
transmission housing, input shaft or ball bearing 
is replaced. 
     
Special tools and equipment

Page 2 of 5

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual    Dimension in the example: -a- = 28.50 mm (1.122 in.)
Pa
ge 2 of 5 In
put shaft, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.35.2

Page 3 of 5

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual 35-18
 
    
Determining circlip thickness behind the input shaft ball bearing   -  Place depth gauge onto transmission housing and measure to seating 
surface for ball bearing. 
   Measurement in the

Page 4 of 5

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual 35-19
      
Available circlips  
     
Dimension -x- (mm)  
Thickness (mm)  
1.48 - 1.56   1.54  
1.57 - 1.65   1.63  
1.66 - 1.74   1.72  
1.75 - 1.83   1.81  
1.84 - 1.92   1.90  
1.93 - 2.01   1.9

Page 5 of 5

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Adjustment Workshop Manual 35-20
      
Determining the circlip in front of input shaft 
ball bearing  
     
-  Drive rear circlip (as calculated) and ball bearing 
onto input shaft using 30-100 press tube. 
    
Available cir