AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual A4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1245/w960_1245-0.png AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual

Page 1 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-1
 
     
Input shaft, disassembling 
and assembling  
     
Special tools and equipment 
     
VW222A pilot drift
     VW295 needle bearing drift
     VW295A needle bearing drift
     VW401 thrust

Page 2 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 40-105 thrust piece
     40-202 press-out piece
     Kukko 17/2 separating tool
     Kukko 21/4 extractor
Pa
ge 2 of 17
11/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triJBHHO.htm

Page 3 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-2
 
  
Notes: 
 
When installing the input shaft or new gears, 
consult technical data   Page 00
-3 . 
 By exchanging parts (Figs. 2, 4 and 6), the 
position of the ball bearing is influenced. In t

Page 4 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-3
 
  
5 - 
Needle bearing for input shaft 
Secured with bolt   Fig. 1Driving out   Fig. 2Application of input shaft/needle bearing   
Fig. 3
 
Allocation  Fig. 4Pressing in   Fig. 5
6 - 
Input sha

Page 5 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-4
 
  
11 - 
Circlip 
IdentificationAllocation  Fig. 14
 , item -3-
12 - 
Synchronizer hub for 3rd and 4th gears 
Shoulder faces 3rd gearPressing off   Fig. 11Pressing on   Fig. 16
13 - 
Circlip 
I

Page 6 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-5
 
  
17 - 
4th gear 
18 - 
Needle bearing for 4th gear 
19 - 
5th gear 
Pressing off   Fig. 10Pressing on   Fig. 18
20 - 
Circlip 
IdentificationAllocation  Fig. 14
 item -5-
If 5th gear is repla

Page 7 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-6
 
    
Fig. 1  Securing bolt for needle bearing
-  Remove securing bolt (arrow).
    
Fig. 2  Driving out needle bearing
Pa
ge 7 of 17
11/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triJBHHO.h

Page 8 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-7
 
    
CAUTION! 
Part numbers are listed here for reference only. Always check with 
your Parts department for the latest information. 
In order to avoid damage due to improper assembly, check th

Page 9 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-8
 
    
Fig. 5  Pressing in needle bearing
-  Install securing bolt and tighten to 25 Nm (18 ft lb).
    
Installed position  Fig. 6  Driving in oiling sleeve into input shaftItem  
Dia. of oiling

Page 10 of 17

AUDI A4 1995 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual 35-9
 
    
Fig. 7  Pulling out needle bearing
A - Internal puller 22-28 mm (0.866-1.102 in.), e.g. Kukko 21/4 extractor
-  Plastic sleeve inside roller sleeve must be destroyed to install internal 
p
Page:   1-10 11-20 next >