AUDI A4 1995 B5 / 1.G APB Engine Motronic Syst
								
                                
                
                
                Manufacturer: AUDI, Model Year: 1995,
                  Model line: A4,
                  Model: AUDI A4 1995 B5 / 1.G
                
                
                 Pages: 166, PDF Size: 0.53 MB
                    
                							
              
              
  
                
              
              
    
        
         
         
  
                                   
  AUDI A4 1995 B5 / 1.G APB Engine Motronic Syst
  A4 1995 B5 / 1.G
  AUDI
  AUDI
  https://www.carmanualsonline.info/img/6/1054/w960_1054-0.png
  AUDI A4 1995 B5 / 1.G APB Engine Motronic Syst
            
        
  
 
Trending: check oil, ESP, warning light, buttons, check engine, radiator, heater
Page 161 of 166
01-132
 
  
Display fields  
  
1   2   3   4  
Display group 046: Diagnostic of catalytic converter (Bank 1)  
Display  xxxx/RPM  
xxx C  
x.x s  
---  
Indicated  Engine speed 
(RPM)  Catalyst 
temperature  Catalytic 
converter 
conversion  Diagnostic condition  
Work 
range  0 - 6800/RPM  
70 - 850  C  
0.0 - 0.99  
Test OFF  
Test ON  
Cat B1 OK  
Cat B1 not OK  
Specified 
value  1900 - 
2200/RPM  greater than 
350 C  0.0 - 0.80  
Cat B1 OK  
Note  
  
  
  
If "Cat B1 not OK" is displayed: Check DTC 
memory  Page 01
-15
 . If no malfunction is stored 
replace catalytic converter.  
      If the specified value "Cat B1 OK" is reached:  
     
- Press -C- button
     
Engine running at 1900 - 2200 RPM 
Pa
ge 161 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
        
        
        Page 162 of 166
     
-  Press buttons -0-, -4- and -7- to select "display 
group number 047" and confirm input with -Q- 
button. 
Pa
ge 162 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
        
        
        Page 163 of 166
01-133
 
  
Display fields  
  
1   2   3   4  
Display group 047: Diagnostic of catalytic converter (Bank 2)  
Display  xxxx/RPM  
xxx C  
x.x seconds  
---  
Indicated  Engine speed 
(RPM)  Catalyst 
temperature  Catalytic 
converter  
conversion  Diagnostic condition  
Work range  0 - 6800/RPM  
70 - 850  C  0.0 - 0.99  
Test OFF  
Test ON  
Cat B2 OK  
Cat B2 not OK  
Specified 
value  1900 - 
2200/RPM  greater than 
350 C  0.0 - 0.80  
Cat B2 OK  
Note  
  
  
  
If "Cat B2 not OK" is displayed: Check DTC memory   
Page 01
-15
 . If no malfunction is stored replace 
catalytic converter.  
      If the specified value "Cat B2 OK" is reached:  
     
- Press -C- button 
Pa
ge 163 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
        
        
        Page 164 of 166
01-134
      
Work step 13: Diagnosis of Secondary Air 
Injection (AIR) system (only on vehicles with 
automatic transmission), on vehicles with 
manual transmission continue with work step 
14  Page 01
-136
   
     
Note:  
     The secondary air pump runs for a few seconds 
during the secondary air injection system 
diagnosis. 
     
Engine at idle sped 
System in Basic Setting 
Q
Input displa
y group number XXX
    
Indicated on display  
-  Press buttons -0-, -7- and -7- to select "display group number 077" and 
confirm input with -Q- button. 
System in Basic Setting 77  
1 
2 
3 
4
    
Indicated on display  
Note:  
The test duration for the secondary air injection system takes 
approximately 60 seconds.  -  Check specified value in display field 4.
Pa
ge 164 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
        
        
        Page 165 of 166
01-135
 
  
Display fields  
  
1   2   3   4  
Display group 077: Diagnostic of secondary air injection system (Bank 1)  
Display   xxxx/RPM   xx.x g/s   xx %  
Test ON  
Indicated  Engine speed 
(RPM)  Air 
mass  Relative air mass secondary air 
injection system  Diagnostic condition  
Work 
range  0 - 6800/RPM        
Test OFF  
Test ON  
Syst. OK  
Syst. not OK  
Abort  
Value   750 - 850/RPM      +10 % to -100 %  
Syst. OK  
Note  
  
  
  
If "Syst. not OK": Check DTC memory 
 Page 01
-15
 .  
      If the specified value of "Syst. OK" is reached:  
     
- Press -C- button.
     
-  Press buttons -0-, -7- and -8- to select "display 
group number 078" and confirm input with -Q- 
button. 
Pa
ge 165 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
        
        
        Page 166 of 166
01-136
 
  
Display fields  
  
1   2   3   4  
Display group 078: Diagnostic of secondary air injection system (Bank 2)  
Display   xxxx/RPM   xx.x g/s   xx %  
Test ON  
Indicated  Engine speed 
(RPM)  Air 
mass  Relative air mass secondary air 
injection system  Diagnostic condition  
Work 
range  0 - 6800/RPM        
Test OFF  
Test ON  
Syst. OK  
Syst. not OK  
Abort  
Value   750 - 850/RPM      +10 % to -100 %  
Syst. OK  
Note  
  
  
  
If "Syst. not OK": Check DTC memory 
 Page 01
-15
 .  
      If the specified value of "Syst. OK" is reached:  
     
- 
Press  button.     
Work step 14: Readiness code, displaying  
     
-  Display readiness code again (measure of 
control)  Page 01
-101
 . 
Pa
ge 166 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
        
        
          
   
Trending: change wheel, ECU, OBD port, transmission, cooling, radiator, wiring