AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide A4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/933/w960_933-0.png AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide
Trending: spark plugs replace, oil, fuel pressure, coolant

Page 11 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-10
 
    
-  Unplug vacuum hoses -1 to 3-.
-  Disconnect connectors as follows:
4 - on intake air temperature sensor -G42-
5 - for throttle valve control module -J338-
-  Remove the air duct hose -

Page 12 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-11
 
    
-  Disconnect connector for Camshaft Position sensor -arrow-.
    
Note:  
Carefully protect the removed injectors from contamination.  -  Remove retaining bolts for fuel manifold and dis

Page 13 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-12
      
-  Disconnect coolant hoses from upper coolant 
line. 
     
-  Move electrical wiring at top of coolant line 
aside. 
    
-  Unbolt upper coolant line from intake manifold and coolant f

Page 14 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-13
      
-  Remove suction hose from flange and 
remove. 
     
Note:  
     Plug intake ports on cylinder head with clean 
cloths. 
     
Installing  
      Installation is carried out in the rev

Page 15 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide      
       Radio operating instructions        
-  Close windows fully using window switches.
Pa
ge 15 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/

Page 16 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-14
      
-  Actuate all power window switches again for at 
least one second in the "close" direction to 
activate automatic open/close function. 
     
-  Set clock to correct time.
     
-  Perf

Page 17 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 2  
Hose clamps for air duct hoses     
3.5  
Pa
ge 17 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE0

Page 18 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-15
      
Cylinder head cover, removing and 
installing
 
     
Removing  
    
-  Remove engine cover -arrows-.
    
-  Remove air filter cover -arrow-.
Pa
ge 18 of 42 C
ylinder head, removin
g an

Page 19 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-16
 
    
- Remove bolts -arrows-. 
-  Remove air ducts -1- and -2-.
    
-  Remove line of crankcase vent -1-.
-  Disconnect hose of crankcase venting from cylinder head cover. 
-  Remove line -1-

Page 20 of 42

AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install User Guide 15-17
 
    
-  Disconnect Ground wire -2-.
- Disconnect connectors -3-.
-  Move lines and hoses aside.
-  Remove ignition coils -1-. 
-  Loosen 2 top retaining clamps for toothed belt guard.
    
-
Page:   < prev 1-10 11-20 21-30 31-40 41-50 50 next >
Trending: oil, coolant, fuel pressure, spark plugs replace