headlight aiming AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual

68

Headlights, aiming using Hella Universal
Beamsetter IV


Service
Align vehicle headlamps using the VAS 5107
(Hella Universal Beamsetter IV) and the following
procedure:
Additional instructions and diagrams
Instruction Manual for the Hella Beamsetter
Series IV

Have a second technician sit in the driver's seat while aligning the
headlights. - Position vehicle on a flat floor surface that meets the following (ISO
10640) specifications:

0.5mm or less slant from front wheel to back wheel of the
Beamsetter -A-.
1mm or less slant per meter for the length of the vehicle -B-.
- Clean headlight lenses.
- Adjust vehicle tire pressure to specifications.
- Bounce front and rear of vehicle up and down several times to settle
vehicle suspension.
Pa
ge 68 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

74

Headlight cleaning system nozzles,
adjusting

Check setting of nozzles, adjust if necessary with
Windshield Washer Aiming Tool 3125A.

CAUTION!

To avoid damage never use a needle or
similar device to adjust nozzles.

Nozzle setting:
a = 65 mm (2.56 in.) c = 40 mm (1.57 in.)
b = 50 mm (1.97 in.) d = 90 mm (3.54 in.)
Pa
ge 75 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6