AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual

AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual A4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/895/w960_895-0.png AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual

Page 1 of 5

AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual 63-11
 
  
Rear bumper (Sedan) Rear bumper, removing and installing (  
VIN 8D XA 200 000)
 
1 - 
Metal bolt 
2 - 
Bracket 
 - To remove, remove metal bolts -1- and 
take off bracket. 
3 - 
Clip 
4 -

Page 2 of 5

AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual 63-12
 
    
Fig. 1  Removing impact absorber from bumper
-  Remove bolts (arrows) and take impact absorber -1- out of bumper -2-.
-  When installing, tighten to 23 Nm (17 ft lb).
Pa
ge 2 of 5 Rear bu

Page 3 of 5

AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual 63-13
 
  
Rear bumper, removing and installing (VIN 
8D XA 200 001  )
 
1 - 
Bumper 
To remove, remove combination bolts -6-.For S4 models, an additional bolt must be 
installed at the wheelhousing l

Page 4 of 5

AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual 63-14
 
  
5 - 
Clip 
To install, press into fender.
6 - 
Combination bolt 23 Nm
7 - 
Impact absorber Removing from bumper   Fig. 2
 .
Pa
ge 4 of 5 Rear bum
per 
(Sedan
)
11/20/2002 htt
p://127.0.0.1:

Page 5 of 5

AUDI A4 1995 B5 / 1.G Rear Bumper Workshop Manual 63-15
 
    
Fig. 1  Additional mount for S4
-  Remove bolt -2 from wheelhousing liner before disassembling bumper 
-1-. 
-  Clip -4- is clipped onto wheelhousing liner -3-.
    
Fig. 2  Removing impa