wheel alignment AUDI A4 1995 B5 / 1.G Suspension Rear Axle All Wheel Drive Workshop Manual

42-40


1 -
Rear subframe
After removing and installing, check wheel
alignment and adjust if necessary page 44
-6
Servicing page 42
-50
Pay attention to removing and installing on
vehicles with headlight range control
page 42
-48

2 -
Self-locking nut
Always replace70 Nm (52 ft lb) + 1/4-turn (90 )Vehicle must be standing on its wheels
when tightening nut
3 -
Bolt Always replace
4 -
Bolt Always replace
5 -
Lower control arm Pay attention to removing and installing on
vehicles with headlight range control
page 42
-48

Removing and installing page 42
-84
Servicing page 42
-89
Pa
ge 2 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3

42-50


Subframe, servicing

WARNING!
Do not attempt to weld and/or straighten the
axle beam.
CAUTION!
If using power tools (pneumatic or electric), do
not tighten the bolted connections more than
hand-tight. Otherwise, the specified tightening
torques could be exceeded.
1 -
Subframe
Tightening sequence (item - 4 -):
- 1. Right-rear
- 2. Left-rear
- 3. Right-front
- 4. Left-front
Align rear axle after removal and
installation page 44
-13

Check and if necessary adjust wheel
alignment after installing page 44
-13

Pa
ge 14 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3