AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1232/w960_1232-0.png AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual

Page 1 of 6

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-16
 
     
Differential, removing and 
installing 
     
Special tools and equipment 
     
VW771 slide hammer-complete set
     3257 plug insert 27 mm
     21/3 Kukko extractor
     
Notes:

Page 2 of 6

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual Check for visible damage to polygon bearing.
     The rough surface of the polygon bearing (with 
drive flange not installed) is not an indication 
that the bearing is defective. An acoustic test is

Page 3 of 6

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-17
 
  
1 - 
Transmission housing1) 
2 - 
Seal 
Always replace   Page 39
-1
3 - 
Circlip 
Always replaceRemoving and installing   Fig. 1
4 - 
Spacer ring 
Only installed on drive axles with polygon

Page 4 of 6

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-18
 
  
CAUTION! 
Install the drive gear carefully onto the 
differential without canting. Do not use force, 
the drive gear can break easily.  9 - 
Speedometer drive gear 
Removing and installing

Page 5 of 6

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-19
 
    
Fig. 1  Removing and installing circlip
-  Clamp drive flange in vise using protective jaws and remove circlip by 
pressing new circlip -A- into groove. 
    
Fig. 2  Removing spacer ring

Page 6 of 6

AUDI A4 1996 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-20
 
    
Fig. 3  Installing spacer ring
-  Drive in spacer ring up to stop, without canting.
    
Note:  
The needle bearings (polygon bearings) do not turn easily when the drive 
flanges are remo