transmission AUDI A4 1996 B5 / 1.G 01A Transmission Drive Pinion And Hollow Shaft Assembly Workshop Manual

35-23


Notes:

When installing new gears or the final drive set,
consult technical data Page 00
-3 .
Adjustments are required when replacing
components marked by1) Page 39
-37
, List
of adjustments
1 -
Transmission housing
2 -
Shim S3
List of adjustments overview Page 39
-37
3 -
Double tapered roller bearing outer race1)
Replace together with item - 5 -Pulling out Fig. 1Pressing in Fig. 3
4 -
Drive pinion
Matched to ring gear, always replace
together as a set Adjusting drive pinion and ring gear
Page 39
-34

Pa
ge 4 of 25 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.35.3

35-29


41 -
Tapered roller bearing outer race1)
Pressing out Fig. 7Pressing in Fig. 8
42 -
Shim S4
List of adjustments Page 39
-37
43 -
Ring
Holds rubber washerApplication Parts catalog
44 -
Rubber washer
Compensates length variationsApplication Parts catalog
45 -
Transmission cover
Pa
ge 11 of 25 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.35.3

35-30


When the bolt is tightened, the outer race will be pulled out of the
housing. Fig. 1 Pulling out double tapered roller bearing outer race
- Remove differential Page 39
-16
.
- Place pressure piece of 3128 bushing puller below outer race.
- Install threaded part of 3128 bushing puller using VW401 thrust plate
onto transmission housing.

Note:
When pressing off, the inner ring of the double tapered roller bearing is
damaged. Fig. 2 Pressing off double tapered roller bearing inner race
- Remove circlip before pressing off.
- Outer race -A- must be installed to press off inner race.
Pa
ge 12 of 25 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.35.3