recommended oil AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual

AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1238/w960_1238-0.png AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual

Page 8 of 31

AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual 39-153
      
Pinion shaft, adjusting
 
     
Notes:  
     
Adjust the ring gear before adjusting the pinion 
shaft (determine total shim thickness Stotal for 
shims S1 + S2)   Page 39
-162
 .

Page 10 of 31

AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual 39-154
 
    
WARNING! 
Wear protective gloves.  -  Install small tapered roller bearing outer race into housing.
-  Lubricate outer race with oil and install using VW408A punch and 30-
205 thrust pad

Page 16 of 31

AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual 39-160
      
-  Remove pinion shaft and large tapered roller 
bearing outer race and install together with 
measured shims S3 and spacer sleeve   Page 
39
-139
 . 
     
-  Install small tapered roll

Page 19 of 31

AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual 39-162
      
Ring gear, adjusting
 
     
Adjusting differential 
      The ring gear must be adjusted if any of the 
components have been replaced   table,   
Page 39
-149
 .  
     
Notes:

Page 25 of 31

AUDI A4 1996 B5 / 1.G 01A Transmission Final Drive Gear Set Workshop Manual 39-167
      
Measuring friction torque  
     
Pinion shaft removed 
     Differential with shims S1* and S2* installed 
    
Friction torque specifications:  
Notes:  -  Install torque gauge, 0-600