transmission AUDI A4 1996 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual

35-2


Notes:

When installing the input shaft or new gears,
consult technical data Page 00
-3 .
By exchanging parts (Figs. 2, 4 and 6), the
position of the ball bearing is influenced. In this
case the input shaft must be re-adjusted
Page 35
-17
.
1 -
Circlip
IdentificationAllocation Fig. 14
, item -1-
Determining thickness Page 35
-17
,
input shaft, adjusting
2 -
Ball bearing for input shaft
Removing and installing Page 34
-55
3 -
Circlip
IdentificationAllocation Fig. 14
, item -2-
Determining thickness Page 35
-17
,
input shaft, adjusting
4 -
Transmission housing
Pa
ge 3 of 17
11/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triJBHHO.htm

35-5


17 -
4th gear
18 -
Needle bearing for 4th gear
19 -
5th gear
Pressing off Fig. 10Pressing on Fig. 18
20 -
Circlip
IdentificationAllocation Fig. 14
item -5-
If 5th gear is replaced, re-determine
thickness of circlip Fig. 15

21 -
Needle bearing for input shaft
Always replaceDamaged when removedPulling out Fig. 7Allocation Fig. 8Driving in Fig. 9
22 -
Plastic sleeve
Made of plastic
23 -
Transmission cover
Pa
ge 6 of 17
11/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triJBHHO.htm