oil AUDI A4 1996 B5 / 1.G 01A Transmission Total Shim Thickness Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1996, Model line: A4, Model: AUDI A4 1996 B5 / 1.GPages: 34, PDF Size: 0.56 MB
Page 9 of 34
39-48
Note:
Make sure gauge contact surface is precisely installed and free of oil. - Place end gauge on face of pinion shaft.
- Remove master gauge and install measuring mandrel into transmission
housing.
Dial indicator extension -A- = 6.5 mm long must be installed. The VW385/3 centering disc faces cover for final drive
- Install differential cover and tighten 4 bolts to 22 Nm (16 ft lb).
- Using adjustable ring, pull 2nd VW385/3 centering disc out as far as
possible, so mandrel can only just be turned by hand.
Pa
ge 9 of 34 Total shim thickness Stotal for shim S3 + S4, determinin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.7
Page 16 of 34
39-53
Measuring friction torque
Notes:
Pinion shaft/hollow shaft tapered roller bearings
are low friction bearings. Therefore the friction
torque has only a limited use as a check.
Correct adjustment is only possible by
determining the total shim thickness Stotal.
Do not additionally oil new tapered roller
bearings to perform the friction torque
measurement. These bearings have already
been treated with a special oil by the
manufacturer.
Friction torque specification: - Install torque gauge, 0-600 Ncm (53 in. lb) on pinion shaft.
- Read off friction torque.
New bearings
Used bearings
150-250 Ncm (13-22 in. lb) 30-60 Ncm (3-5 in. lb)
Pa
ge 16 of 34 Total shim thickness Stotal for shim S3 + S4, determinin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.7
Page 26 of 34
39-62
Measuring friction torque
Notes:
Differential tapered roller bearings are low
friction bearings. Therefore the friction torque
only has a limited use as a check. Correct
adjustment is only possible by determining the
total shim thickness Stotal.
Do not additionally oil new tapered roller
bearings for friction torque measurement. The
bearings have already been treated with a
special oil by the manufacturer.
Pinion shaft removed
Friction torque specifications:
Note: - Install torque gauge 0-600 Ncm (53 in. lb) -A- onto differential.
B - Socket
- Read friction torque.
New bearings
Used bearings
150-350 Ncm (13-31 in. lb) 30-60 Ncm (3-5 in. lb)
Pa
ge 26 of 34 Total shim thickness Stotal for shim S3 + S4, determinin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.7