AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owner's Guide

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owner's Guide A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1060/w960_1060-0.png AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owner's Guide
Trending: display, check engine, sensor, ignition, check engine light, buttons, air condition

Page 31 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide       Percent indication in display field 4 must also rise 
uniformly. In the process, the tolerance range of 
4 to 49% is not completely utilized.  
Pa
ge 31 of 41 Electronic en
gine 
power control

Page 32 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-157
      
Note:  
     The indicated value in display field 3 must always 
be about twice as large as the value in display 
field 4. 
      If indications do not resemble description:  
     
-  C

Page 33 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-158
      
Checking voltage supply of Throttle Position 
(TP) sensor  
     
-  Remove driver-side storage compartment.
     
       Repair Manual, Body
-Interior, Repair Group 
68; Instrument Pane

Page 34 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide If specified values are not obtained:  -  Also check signal wires. 
-  Check wire connections from Engine Control Module (ECM) to sensors 
for accelerator pedal position. 
Pa
ge 34 of 41 Electronic en

Page 35 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-159
      
Checking wire connections  
     
-  Connect VAG1598/31 test box at wiring harness 
to ECM, do not connect ECM   Page 24
-17
 . 
    
-  Check the following wire connection for open circ

Page 36 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-160
       If no malfunctions are found in wires:  
     
-  Replace accelerator pedal position sensor.
     
       Repair Manual, Fuel Supply System, Repair 
Group 20
   
     
Note:  
     For v

Page 37 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-161
      
Kick down function, adapting
 
      If the sensor for accelerator pedal position or the 
Engine Control Module (ECM) is replaced on a 
vehicle with automatic/variable transmission, the

Page 38 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-162
 
Rapid data transfer  
HELP
Select function XX
    
When indicated on display:  
-  Press buttons -0- and -4- to select "Initiate basic setting" and press -Q- 
button to confirm input. 
Basic

Page 39 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide 24-163
 
  
Display fields  
  
1   2   3   4  
Display group 063: Kick down function, adapting  
Display   xx %   xx %  
Kick 
down  ---  
Indicated   Sensor 1 for  
Pedal 
position  Sensor 2 for  
P

Page 40 of 41

AUDI A4 1996 B5 / 1.G ATQ Engine Electronic Engine Power Control Checking Owners Guide complete.In both cases, "Basic Setting" must be exited and the adaptation must be performed again   Page 24
-161
 . 
Pa
ge 40 of 41 Electronic en
gine 
power control 
(E-Gas
), checkin
g
11/23/2002 ht
Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >
Trending: display, buttons, sensor, air condition, ignition, check engine light, check engine